In the present study, the numerical simulation has been performed to investigate K-factor for temperature variation of working fluid in spray nozzle with orifice. The commercial CFD software, Fluent with the proper modeling was applied for analyzing the internal of the spray nozzle. Numerical result for K-factor at $20^{\circ}C$ agrees with the experimental result that it applied n=0.5 within about 7% error. The pressure drop inside nozzle is showed 20% passing swirler, 70% in the region between the outlet of swirler and the orifice and 10% at the outlet of orifice. As the operating pressure is increased, K-factor is decreased by effect of flow resistance at it's inlet before pass swirler. The temperature increase of working fluid reduced the flow rate according to reducing of density, and average 1.23% decrease is showed in the present research.
Numerous regulations have been introduced and a various kinds of institutional intervention have been made by government against the occupational safety and health problems. However, it was serious issue to the workers that what can be claimed by those who meet with apparently harmful and risky working conditions in their social systems. In the view point of employees, their right to be free from unacceptable risk and hazards has not been clearly defined. Therefore, workers have very limited rights to take any actions unless employer or government do their actions. It is believed that this undesirable conditions resulted from Jack of legal definition of workers' right to work in the safe and healthy environment. It has been found increased social pressure to make intervention to the industry to protect workers' health. Also, increased pressure has been kept for deregulation. This conflict lay the current situation in dilemma. The concept of the working environmental right has been developed and discussed in this study to overcome this trade-off confliction. It should be clearly separated between legal aspects and administrative and Policy area to make the regulations effective. Strong enforcement to the industry based on the law should be minimum, however, it should be practically effective in the aspect of workers' right. Administration and policy should be focused on supportive and leading activities to achieve the ultimate goal, safe and healthy working environment. It is concluded that establishment of working environmental right would satisfy workers and industry and it would result in improvement workers' environment and conditions.
This study examined the fashion culture of 20-30s working women through clothing norm relationships in the workplace. A literature research was conducted along with qualitative research, in-depth interviews in order to understand the domestic working environment and fashion culture such as lifestyle and consumer culture characteristics of 20-30s working women. The results were: First, it showed that the increased number of members having various inclinations caused subcultures through an increase of women's economic activities and transition to a knowledge-information society in domestic work places that changed into a business casual that recognized employees' autonomy and diversity. Second, in the working place, clothing norms coexist as stipulated by statutes, company rules, and official documents as well as others implied by experiences of sanction against members. Workplace closing norms are classified into norms of exposure that draw attention to clothes and casual clothes. Third, it showed that factors pressuring clothing norms are classified as external pressures and by spontaneous self-censorship that cause conflict and confusion with working women's fashion according to the degree of pressure. Two kinds of pressure by others (or types of departments and members) were observed.
A novel design process of a parallel multi-flow type air-cooled condenser of a dual-loop waste heat recovery system with Rankine steam cycles for improving the fuel efficiency of gasoline automobiles has been investigated focusing on reduction of the pressure drop inside the micro-tubes. The low temperature condenser plays a role to dissipate heat from the system by condensing the low temperature loop working fluid sufficiently. However, the refrigerant has low evaporation temperature enough to recover the waste from engine coolant of about $100^{\circ}C$ but has small saturation enthalpy so that excessive mass flow rate of the LT working fluid, e.g., over 150 g/s, causes enormously large pressure drop of the working fluid to maintain the heat dissipation performance of more than 20 kW. This paper has dealt with the scheme to design the low temperature condenser that has reduced pressure drop while ensuring the required thermal performance. The number of pass, the arrangement of the tubes of each pass, and the positions of the inlet and outlet ports on the header are most critical parameters affecting the flow uniformity through all the tubes of the condenser. For the purpose of the performance predictions and the parametric study for the LT condenser, we have developed a 1-dimensional user-friendly performance prediction program that calculates feasibly the phase change of the working fluid in the tubes. An example is presented through the proposed design process and compared with an experiment.
본 실험에서는 리튬 이차 박막전지의 음극물질로 주석 산화물 박막을 RF magnetron sputter을 이용하여 증착하였다. RF power를 2.5w/$\textrm{cm}^{2}$로 고정시키고, 공정압력을 5mtorr에서 30mtorr까지 변화시키면서 막의 결정성 및 응력 변화, 굴절률 등을 측정하여 주석 산화물 박막의 음극 특성을 조사하였다. 분석한 결과, 압력이 증가함에 따라 증착 속도는 $125{\AA}$/min에서 $58{\AA}$/min까지 감소하였으며, 결정 구조는 (110)면에서 (101)면과 (211)면으로 천이됨을 보였다. 또한 막응력은 공정압력 20mtorr를 기준으로 압축응력에서 인장응력으로 바뀌었고, 굴절률도 1.93에서 1.79로 감소하였다. 공정압력변화에 따른 충방 전 시험결과 공정압력 5mtorr에서 가장 큰 가역적 용량($483.91\mu\textrm{Ah}/\textrm{cm}^{2}-\mu\textrm{m}$을 보였으나, 사이클이 진행될수록 사이클 퇴화가 점차 증가하였고, 10mtorr에서는 가역적 용량 및 사이클 특성 모두 좋은 것으로 나타났다. 이는 공정 압력이 감소함에 따라 막의 밀도의 증가로 전기 화학적으로 반응할 수 있는 활물질의 양이 증가한 것으로 생각되며 또한, 사이클 특성은 막응력에 의해 크게 영향을 받는다고 생각된다.
고압을 사용하는 초음속 제트기술은 작동유체와 관련하여 다양한 형태의 산업 및 공학응용분야에 널리 이용되고 있다. 본 연구에서는 고압파이프에서 분출되는 초음속 제트유동에 의해 생성되는 충격파의 영향을 고찰하기 위해 ANSYS FLUENT v.16를 가지고 SST $k-{\omega}$ 난류모델을 적용하여 작동유체(공기, 산소, 수소)에 따른 압력비 및 Mach수의 유동특성을 해석하였다. CFD 해석시 경계조건으로 입구의 가스온도는 300 K이고, 압력비율은 5:1로 설정하였으며, 밀도함수는 이상기체의 법칙을 이용하였고, 점성함수는 Sutherland 점성의 법칙을 이용하였다. 그 해석결과로 작동유체의 밀도가 작은 기체일수록 분출거리에 따라 압력비가 더 크게 떨어짐을 알 수 있었고, Mach수는 작동유체의 밀도가 높을수록 낮음을 알 수 있었다. 따라서 작동유체의 밀도에 따라 충격파의 영향이 크다는 점을 알았다. 본 연구를 토대로 다양한 작동유체에 따른 제트의 형상 및 직경 변화, 압력비의 변화 등에 따른 초음속 제트유동이 충격파에 미치는 영향에 대한 실험 및 CFD 해석연구와 실증연구가 병행하여 진행된다면 해석결과의 신뢰성은 더 높아질 것으로 사료된다.
In this study, V-notch part has been considered as one of safety components in rectangular cup used for mobile device. This kind of safety component in rectangular cup with the V-notch part, which controls adequately the increased internal pressure in the rectangular cup, plays an important role to prevent the explosion from the excessive internal pressure. The protecting mechanism on the mobile device against the explosion is that a series of fracture on the V-notch part at the critical internal pressure level occurs. Therefore, it is very crucial to estimate accurately the working pressure range of the safety device. Relationship between the working internal pressure and fracture phenomenon at V-Notch part was investigated through numerical analysis using ductile fracture criteria. Integral value, I, of the used ductile fracture criteria was calculated from effective stress and strain, and then the bursting pressure of the V-notch part was extracted. Comparisons between the estimated and experimental results show that this systematic approach to predict bursting pressure using the ductile fracture criteria gives fairly good agreements.
The experimental investigation on energy separation in a vortex tube has been carried out to sow the effect of inlet and outlet pressures with various working fluids(air,$O_2,\;and\; CO_2$). Those outlet pressure means cold outlet and hot outlet pressure which were set equally. The results showed that the total enthalpy variation became a maximum when the mass flow rate at the cold outlet was a half of the total mass flow rate in the vortex tube (y=0.5). The total enthalpy variation was quite affected by the pressure difference between the inlet and outlet of vortex tube when the ratio of the inlet pressure to the cold outlet pressure remained constant. Although specific enthalpy differences between the inlet and the outlet (both cold and hot outlet) did not noticeably vary with the pressure difference, the specific enthalpy difference between the inlet and cold outlet was dominantly affected by physical properties of working gases.
수용액에서 탄산계 이온종들은 알칼리도, 완충 용량, 생물학적 생산지수 등과 같은 물의 여러 화학적 성질들을 결정하는데 있어 중요한 역할을 하고 있다. 이러한 화학종들은 또한 수계에서 고체, 액체, 그리고 기체 상태 등으로 변화하며 반응을 하는 특성을 지니고 있다. 고체상이 없는 상황에서 탄산계 이온종들의 총량과 각 이온종들의 상대량은 대기에서의 이산화탄소의 분압에 의해 결정되며 이는 또한 수계의 제반 성질에 직접적인 영향을 미치게 된다. 수환경에서 진행되는 정수, 혹은 폐수 처리 공정, 폐기물 처리공정, 그리고 폐기물의 재활용과 관련된 공정들에 있어 공정의 최적화를 위해서는 수환경의 특성을 파악하는 것이 매우 중요하며 이러한 수환경의 특성에 가장 크게 영향을 미치는 요소들 가운데 하나가 탄산계 이온종들이다. 대기에서의 이산화탄소의 분압과 물의 화학적 성질, 특히 pH와의 근본적인 연관성을 이해하기 위해 물과 접촉한 상태의 드라이아이스로부터 발생하는 순수한 이산화탄소의 활성 분압을 수계에서의 평형론에 근거하여 계산하였다. 탄산의 해리와 관련된 평형상수들을 van't Hoff식에 의해 결정하였으며 평형계산의 결과를 입증하기 위해 pH 에 따른 탄산계 이온종들의 분배 곡선을 작성하였다. 계산된 이산화탄소 기체의 활성 분압은 수용액에서의 탄산계 이온종들의 농도의 함수인 것으로 나타났으며 수용액에서 일어나는 반응들의 체계적 이해를 위해서는 수용액과 접해있는 이산화탄소 등과 같은 기체의 활성 분압에 대한 선행 계산이 필요한 것으로 파악되었다.
본 논문에서는 압력용기의 밀봉성과 밀접한 관계를 맺고 있는 O-링 그루브 형상의 온도분포와 변형거동 특성에 대한 연구를 수행하고자 한다. 압력용기에 작용하는 온도는 히터에 의해 가열되고, 압력은 가스 압축기에 의해 가압된다. 결국, 압력용기는 제한된 작업기간동 안 높은 압력과 높은 온도를 유지해야 한다 이러한 작동조건에서 압력용기의 가스는 구형 그루브에 설치된 두 개의 O-링에 의해 대기중으로 누출되지 말아야 한다. 유한요소해석 결과에 의하면, 압력용기의 밀봉성을 확보하기 위해서는 메탈 시일 소재의 열적, 기계적 특성이 대단히 우수해야 한다는 사실을 지적하고 있다 즉, 메탈 시일 소재는 높은 열전도 계수와 낮은 기계적 강도를 유지해야 밀봉성을 유지하는데 유리하다. 이러한 소재는 O-링을 설치하는 구형 그루브의 밀봉간극이나 그루브의 폭을 줄여줄 수 있기 때문에 압력용기의 밀봉특성을 향상시키게 된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.