• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1322-1329
• /
• 2004

End-milling has been used widely in industrial system because it is effective to a material manufacturing with various shapes. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum mechanical vibration of main spindle, surface roughness and cutting temperature have an effect on end-milling condition such as, cutting direction, revolution of spindle, feed rate and depth of cut, etc. Therefore, this study carried to decide the working condition for optimum mechanical vibration of main spindle, surface roughness and cutting temperature using design of experiments, ANOVA and characteristic function. From the results of experimentation, mechanical vibration has an effect on revolution of spindle, radial depth of cut, and axial depth of cut. The surface roughness has an effect on cutting direction, revolution of spindle and depth of cut. And then the optimum condition used design of experiments is upward cutting In cutting direction, 600 rpm in revolution of spindle, 240 mm/min in feed rate, 2 mm in axial depth of cut and 0.25 mm in radial depth of cut. By design of experiments and characteristic function, it is effectively represented shape characteristics of mechanical vibration, surface roughness and cutting temperature in end-milling.

• 한국의류학회지
• /
• 제31권11호
• /
• pp.1520-1529
• /
• 2007

Workers on construction sites are exposed to multiple and varied threats. Of those, climatic factors such as high/low air temperatures and high/low humidity have a bad mental and physical health effect on workers. Especially, work in hot environment has a tendency to cause fatigue, reduce productivity and increase the incidence of accident. So, the purpose of this research was to understand working clothes and working environment of workers at a construction site in summer. The depth interview was performed by 45 workers of 4 different construction sites and the results were as follows. Workers wore average 4 items as clothing(upper, lower) and average 5 items as personal protective equipments(PPEs). They answered "head" is the hottest body area and must be protected during working. This means the necessity of development in safety hat. In addition, it should be developed working clothes and gaiters for alleviating heat stress and safety shoes for diminishing weight. It is expected that this research plays basic and important rolls to develop PPEs for reducing the heat stress of construction workers.

• 대한물리의학회지
• /
• 제14권2호
• /
• pp.79-88
• /
• 2019

Purpose: This study was conducted to understand the client relationship experience of the physical therapists working at elderly care facilities and to lay the foundation for finding the identity of physical therapists. Methods: In-depth interviews were conducted on eight incumbent physical therapists who had experienced working in elderly care facilities for at least one year. Data collection was conducted between June and September 2017, and the interview took an hour to an hour and a half to complete. After an in-depth interview, it was arranged as a file and analyzed according to the four steps of the phenomenological research method of the Giorgi. Results: Data were collected and analyzed; 19 categories, 6 themes and 5 domains were derived. Six themes were presented according to the 5 domains; the subject of relationships included 'diversity elderly'; context of relationships included 'the world of elderly nursing homes I did not know'; influence of relationships included 'the physical therapist is heartbroken because of the tormenting elderly'; condition of relationships included 'a reality that is tied to work'; aspects of relationships included 'how to reestablishing relationships with the elderly' and 'recognized and identified as a physical therapist'. Conclusion: This study shows that physical therapists working in elderly care facilities generally tend to fulfill their responsibilities and interact with clients; we found that identity of physical therapists was primarily defined by relationship experiences with patients.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.71-76
• /
• 2008

Micro end-milling is one of effective technology that is able to do ultra-precision machining while increasing the productivity and has wide application field. But selection of machining condition is very difficult because of complicated machining mechanism. Therefore this study was carried out to select working factors to get the optimum surface roughness. Machining condition are depth of cut, feed rate and spindle revolution. The result of this study showed that Surface roughness was affected, in the other of depth of cut, spindle revolution, feed rate. And this study provided an regression equation relating surface roughness to working factors through Regression Analysis and determination coefficient of regression equation had a satisfactory reliability of 79%.

• 가족자원경영과 정책
• /
• 제17권4호
• /
• pp.57-84
• /
• 2013

The aim of this study was to develop a leisure program that combines yoga and tea meditation affects the positive mood states and happiness of elementary working wives in their 50's. For this study, a pre and posttest control group design was used. A total of 46 subjects were allocated equally to the experimental group and the control group. A pretest, comprising 13 sessions of treatment, and a posttest were conducted. Of the 23 subjects in the experimental group, 16 were selected as interviewees and underwent in-depth interviews. The main results of this study are as follows: First, the experimental group of middle-aged working wives showed higher positive mood states(t=-3.494, p<.01) and higher levels of happiness(t=2.236, p<.05) after the program compared to the control group. Second, after participating in the study, those who had undergone in-depth interviews indicated that their lives had changed to become more confident, happy, comfortable, and self-directed, and that this change had positively impacted their relationships. In conclusion, in a situation where the lives, leisure and happiness of middle-aged working wives is becoming a social problem and a topic of discussion for national policies, it would be beneficial to develop and establish leisure programs for this population in order to promote health and happiness.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.79-87
• /
• 1997

This study was performed to evaluate basic characteristics of electron beam welding process for a 9% Ni steel plate. The principal welding process parameters, such as working distance, accelerating voltage, beam current and welding speed were investigated. The AB (Arata Beam) test method was also applied to characterize beam size and energy density of the electron beam welding process. The electron beam size was found to decrease with the increase of accelerating voltage and the decrease of working distance. So, in case of high voltage (150kV), spot size and energy density of electron beam were revealed to be 0.9mm and $6.5\times10^5W/\textrm{cm}^2$ respectively. The accelerating voltage among the welding parameters was found to be the most important factor governing the penetration depth. When the accelerating voltage of electron beam was low ($\leq$90kV), beam current and welding speed did not affect on the penetration depth significantly. However, in case of high voltage ($\geq$120kV), the depth of penetration increased very sensitively with the increase of beam current and the decrease of welding speed.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.34-40
• /
• 1998

The burr produced on piece part edges in machining operations must be removed for most parts to function effectively. Although considerable cost have been expended in improving deburring methods, little energy has been applied toward minimizing burrs. This study has been carried out to prevent the burrs produced on pure aluminium under various working condition and specimen shape in turning operations. The computer image processing system was used for measurement of size of burr, such as burr length, burr depth and burr area. The size of burr showed a decreasing tendency with the increase of rake angle and side cutting angle but it increased rapidly with the increase of depth of cut and the cutting speed has no effect on size of burrs. The size of burr rapidly decreased with the increase of edge angle and burrs are not occurred if edge angle is over 80$^{\circ}$.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.156-163
• /
• 2005

This study was attempted to provide some fundamental data for safety structrural design of biological production facility. Wind load and snow load, acting on agricultural structures is working more sensitive than any other load. Therefore, wind speed and snow depth according to return periods for design load estimation were calculated by frequency analysis using the weather data(maximum instantaneous wind speed, maximum wind speed, maximum depth of snow cover and fall) of 68 regions in Korea. Equations for estimating maximum instantaneous wind speed with maximum wind speed were developed for all, inland and seaside regions. The results were about the same as the current eqution in general. Design wind speed and snow depth according to return periods were calculated and Local design wind load and snow load depending on return periods were presented together with iso-wind speed and iso-snow depth maps. The calculated design snow depth by maximum depth of snow cover were higher than design snow depth by maximum depth of snow fall. Considering wind speed and snow depth, protected cultivation is very difficult in Ullungdo, Gangwon seaside and contiguity inland regions, and strong structural design is needed in the west-south seaside against wind speed, and structure design of biological production facility in these regions need special consideration.

• 종양간호연구
• /
• 제12권1호
• /
• pp.100-109
• /
• 2012

Purpose: This study was done to understand the meanings and nature of experiences of the burnout of nurses working in oncology wards. Methods: The hermeneutic phenomenology developed by van-Manen was used. The period for data collection was from November, 2006 to May, 2007. This study took place in 3 university hospitals in B & U cities. Nine nurses working in oncology wards participated. Data collection was done through individual in-depth interviews. Results: The eight most common themes demonstrated by participants from this study were 'being fed up with endless demands', 'collapsing in front of deaths', 'gasping for breath due to overwhelming tasks', 'uncontrollable suffering of body', 'gradually loosing self-esteem', 'frustration from the work world', 'beleaguered relationships', and 'desire to escape'. Conclusion: The results of this study indicate that there is a need to develop a preventive burnout program for nurses working in oncology wards.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.60-70
• /
• 2009

This paper explores the ways in which collaborative working among multiple disciplines in building projects can be more effective and efficient. It focuses on the support that can be provided by the latest development in information and communication technologies. It also considers the growing interdependence between participants in the process and their changing roles as they harness the power of the new technologies in new collaborative arrangements. It is argued that collaborative working should be addressed holistically from the technological angle, the social angle, as well as the organisational angle, to ensure its successful implementation in the construction industry. A case study is given to illustrate the use of ICT in supporting value management studies. The key issues surrounding the emerging field of research - collaborative construction information management - and the potential benefits and challenges of its wide adoption are discussed at depth.