• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.814-820
• /
• 2014

In this work, hydrate inhibition performance of water-soluble polymers including pyrrolidone, caprolactam, acrylamide types were evaluated using torque measurement and high pressure differential scanning calorimeter (HP ${\mu}$-DSC). The obtained experimental results suggest that the studied polymers represent the kinetic hydrate inhibition (KHI) performance. 0.5 wt% polyvinylcaprolactam (PVCap) solution shows the hydrate onset time of 34.4 min and subcooling temperature of 15.9 K, which is better KHI performance than that of pure water - hydrate onset time of 12.3 min and subcooling temperature of 6.0 K. 0.5 wt% polyvinylpyrrolidone (PVP) solution shows the hydrate onset time of 27.6 min and the subcooling temperature of 13.2 K while polyacrylamide-co-acrylic acid partial sodium salt (PAM-co-AA) solution shows less KHI performance than PVP solution at both 0.5 and 5.0 wt%. However, PAM-co-AA solution shows slow growth rate and low hydrate amount than PVCap. In addition to hydrate onset and growth condition, torque change with time was investigated as one of KHI evaluation methods. 0.5 wt% PVCap solution shows the lowest average torque of 6.4 N cm and 0.5 wt% PAM-co-AA solution shows the average torque of 7.2 N cm. For 0.5 wt% PVP solution, it increases 11.5 N cm and 5.0 wt% PAM-co-AA solution shows the maximum average torque of 13.4 N cm, which is similar to the average torque of pure water, 15.2 N cm. Judging from the experimental results obtained by both an autoclave and a HP ${\mu}$-DSC, the PVCap solution shows the best performance among the KHIs in terms of delaying hydrate nucleation. From these results, it can be concluded that the torque change with time is useful to identify the flow ability of tested solution, and the further research on the inhibition of hydrate formation can be approached in various aspects using a HP ${\mu}$-DSC.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.25-32
• /
• 1996

This work has been carried out to examine the number of Total, ICM and TE cells of F1 mouse blastcysts at day 4 after IVF by differential labelling of the nuclei with polynucleotide-specific fluorochromes and to obtain a fundamental information of preimplantation mouse embryo development. Blastocysts produced by superovulated B6CBA F1(C57BL/${\times}$CBA) eggs were inseminated with $1{\times}10^6$spermatozoa/ml and cultured in M16 medium at $37^{\circ}C$, 5% $CO_2$ incubator for 95hrs. Blastocysts were classified as early, middle, expanded and hatching stage according to the developmental morphology; blastocoel expansion and zona thickness. The results obtained in these experiments were summarized as follows; 1) The development rate of blastocysts at 95hrs after IVF was 86.7% and classified blastocysts to early, middle, expanded and hatching were 16.3%, 18.9%, 10.5% and 40.9%, respectively. 2) The numbers of total blastomere using bisbenzimide in the classified blastocysts to early, middle, expanded and hatching were 35.6${\pm}$1O.4, 49.4${\pm}$8.6, 60.8${\pm}$1O.7 and 62.7${\pm}$13.9, respectively. 3) In ICM and TE cell number by using differential labelling with polynucleotide-specific fluorochrome in the classified blastocysts to early, middle, expanded and hatching; ICM numbers were 9.6${\pm}$3.0, 13.6${\pm}$3.9, 16.0${\pm}$3.3 and 19.5${\pm}$4.6, respectively and TE cell numbers were 30.6${\pm}$5.1, 39.9${\pm}$5.8, 42.2${\pm}$8.1 and 43.7${\pm}$11.1, respectively. These results showed the same increase pattern according to development advance level. Also, when compared with the results of total count were obtained between bisbenzimide only and differential labelling, both of them showed the same increase pattern according to development level and at the same time their cell numbers were almost the same. So, rapid and simple cell count method using differential labelling can be used for the examination of later preimplantation development or as an indicator of embryo quality according to the variables of culture conditions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.177-192
• /
• 2018

The mission of the university is to grow young people who will be responsible for the next generation nation to mature society. In particular, the role of universities in the 4th Industrial Revolution era is to foster creative talents. Therefore, innovative changes are required for existing infusion education and employment-oriented college education contents and teaching methodology. In the high youth unemployment rate, entrepreneurship education is spreading to universities to innovate existing organizations and create new jobs. Until now, however, the effects of university entrepreneurship education have been studied mainly in the field of start-up. Therefore, it is very difficult to study various effects on entrepreneurship education. In this study, empirical analysis of the effect of entrepreneurship training on career preparation behaviors of university students who are about to enter the society is verified. The sample of this study was surveyed from August, 2016, and the questionnaire was applied to 393 university students who selected 5 universities and entrepreneurship education. As a result of the analysis, the ability of communicative communication and creative problem solving cultivated through entrepreneurship education had a positive effect on entrepreneurship and self - efficacy, Entrepreneurship and self - efficacy had a positive (+) positive effect on career preparation behavior. However, cooperative communication ability, creative problem solving ability, and effective work behavior ability by entrepreneurship education were not directly related to career preparation behavior. On the other hand, in verifying the mediating effect of entrepreneurship and self - efficacy, it proved that mediating role of positive communication between collaborative communication ability, creative problem solving ability and career preparation behavior. The implications of this study are as follows This study examines the effects of university entrepreneurship education on career preparedness behaviors.In other words, the university proved the direct effect and the mediating effect that affects positively (+) effect on career preparation behaviors by encouraging entrepreneurship and self - efficacy, rather than quantitative extension based on competency. Also, the implication of the parameters (entrepreneurship, self - efficacy) as a key variable for the effect and performance of career preparation behavior was derived.It also suggests that it is necessary to improve the creativity ability of entrepreneurship education so that it can have a direct and meaningful influence on career preparation behavior. First of all, it is urgent to develop a qualitative evaluation index for entrepreneurship education in order to measure these effects. Therefore, further study is required to verify the various implications for future entrepreneurship education, as well as the implications that entrepreneurship education is indispensable for the preparation of university students' careers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.331-336
• /
• 2012

This study was carried out to evaluate the wheat cultivation system to reduce costs and mechanize wheat production. A field study was conducted for 2 years (2009 to 2010) at the National institute of crop science, Iksan, Korea. We used working system I and working system II for the experiment. Working system I is used a multiple machine attached with a spreader tractor (seeding, fertilization, seed coverage, and weed control functionality) and working system II is used a multiple machine with a tractor which works for simultaneous job when seeding step (seeding, fertilization, and seed coverage). Sowing to harvesting operation time is 118 hours/ha for mechanize with conventional planting. Working system I is a multiple machine and a combine machine with a tractor, which worked 26 hours/ha lower than conventional planting. Working system II is 18 hours/ha lower than conventional planting. The reduced work efforts of working system I and II were 78% and 85% respectively. The growth and yield of wheat according to working system I and II is lower than conventional planting. Therefore, a multiple machine needs to study for appropriate seeding rate. Mechanization cost in consideration of the mechanical break-even point when the working system I is 3.7 ha and working system II is 4.2 ha. The farm income is enhanced by working system I (778,110 won/ha) and working system II (849,930 won/ha). The results showed that application of a multiple machine lowered costs of wheat production.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.3
• /
• pp.251-261
• /
• 2003

As a part of an on-going project investigating flux of materials in Gomso Tidal Flat, we have monitored temporal and spatial distribution of nitrogen components(TN, PON, DON, DIN) and have sought the relationships with the freshwater input(tidal range, salinity), the biological activities(chlorophyll-${\alpha}$, TP, DIP, silicate) and the resuspended bottom sediment in seawater(SPM) from 1999 to 2000. TN in seawater was 39.05 $\mu\textrm{m}$ol 1$\^$-1/ (31.03∼42.93 $\mu\textrm{m}$ol 1$\^$-1/) without any statistical difference(p<0.05) between the studied periods. Organic nitrogen (DON and PON) occupied 75％, 95％, 73％, and 75％ in April, August, September and November, respectively. DON and PON have been found within the narrow concentration ranges of 11.30∼16.38 $\mu\textrm{m}$ol 1$\^$-1/ and 13.16∼20.04 $\mu\textrm{m}$ol 1$\^$-1/ in spite of severe environmental differences through the studied periods. Dissolved fractions of nitrogen(DON and DIN) occupied 53∼65％ of TN. Only DIN varied with an evident temporal variability: low concentrations(1.325∼1.616 $\mu\textrm{m}$ol 1$\^$-1/) in August and high enrichment(8.377∼14.65 $\mu\textrm{m}$ol 1$\^$-1/) in September. High consumption rate of DIN by phytoplankton and a long-lasted drought probably induced such low concentration of DIN in August. Eventually heavy precipitation probably introduced plenty of new nitrogen sources into Gomso Bay in September. The portion of PON, DON and DIN in the total nitrogen was 40％, 38％ and 22％, respectively. Their contents were in the order of DON>PON>DIN for the year round except PON>DON>DIN only in September. The highest DON portion in August probably due to the active microbial decomposition of organic material in summer. Only in April, some evident negative correlations have been found between chlorophyll-${\alpha}$ and DIN mostly nitrate(-0.64, p<0.01), phosphate(-0.46, p<0.01) and silicate(-0.55, p<0.01). The Si(OH)$_4$/DIN/DIP ratios in the water column suggests the limitation of DIN for the growth of phytoplankton during the dry summer in Gomso Bay, which was the case of August in this work. Even with some difference between the studied periods, the primary factors on the distribution of nitrogen components in seawater overlying the Gomso Tidal Flat have been the tidal range and the freshwater input, but the additional variations were due to the biological activities.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.4
• /
• pp.215-225
• /
• 2016

There is growing attention towards the performance of non-profit organizations (NPO) as cases of moral hazard have emerged as social issues and the public becomes interested in the accountability of NPOs. Social welfare is among the representative service areas of NPOs, and it is regarded as a human service because it is delivered by people. Therefore, human capital-measured by criteria such as levels of organizational commitment-significantly affects the performance of social welfare organizations. However, these organizations have a high turnover rate due to inadequate working environments, heavy workloads, intensive work, and poor remuneration. Against this background, we surveyed social welfare organizations located in Busan and examined how workers' organizational commitment affects their turnover intention and the performance of the organization. For data analysis, SPSS WIN 18.0 was used, and variable-specific frequency analysis and technical statistics were used to identify general properties. A Pearson correlation analysis and a multiple regression analysis were conducted to investigate correlations and causal relationships among main variables. The results showed that the social workers' level of organizational commitment was 3.36 for normative commitment, 3.07 for continuance commitment, and 2.75 for affective commitment. The level of normative commitment was slightly higher than moderate, continuance commitment was close to moderate, and affective commitment was lower than moderate. The surveyed social workers' turnover intention was 2.71, and organizational performance was 2.79; both of those results were slightly lower than moderate. It was observed that affective commitment, marital status, workload, and age affected social workers' turnover intention. Their affective commitment, gender, and age affected the organization's performance. These results suggest that, for launching or operating an NPO, it is important to manage human capital effectively, particularly their affective commitment, to lower workers' turnover intention and improve organizational performance.

• Journal of Science Education
• /
• v.41 no.3
• /
• pp.365-381
• /
• 2017

Based on the previous study (Park et al., 2015) which indicated positive results in the improvement of science teaching through the POCoM (Practical On-site Cooperation Model) application, this work concentrates on expanding the POCoM to more various teaching settings. To do this, 18 cyclic applications (72 teaching classes in total) of the POCoM were divided into (1) the first cycles and the second cycles conducted after the first cycles, (2) classroom teaching and laboratory teaching, and (3) cycles by our research team and cycles by other experts team. The comparison between the two parts were conducted using the improvement rates, the number of KTOP (Korean Teaching Observation Protocol) items which improvement was needed, and the change of these numbers according to teaching sequence. As results, no difference regarding the improvement was observed between classroom and laboratory teachings, and also between the first and the second cycles. When other experts team applied the POCoM, the number of KTOP items which improvement was needed was larger and the improvement rate was lower than those in the cycle by our research team. Nevertheless, these differences were not statistically significant, and also, it was expected that, if other experts team tries to improve science teaching through 6 teachings, the improvement by the other experts would be nearly the same with the improvement by our research team through 4 teachings. In conclusion, it is confirmed that the POCoM can be used in various teaching settings with the almost the same potency. Lastly, the necessity and possibility of the more detailed and qualitative analysis about the POCoM application are discussed.

• Korean Journal of Cognitive Science
• /
• v.27 no.1
• /
• pp.1-25
• /
• 2016

The present study investigated the effect size of attention and consciousness on change detection. We confirmed the effect size of consciousness by comparing the condition which combined attention and consciousness and the condition of attention without consciousness. Then, we confirmed the effect size of attention by comparing the condition of attention without consciousness and the control condition which excluded attention and consciousness. For this purpose, change detection task and continuous flash suppression (CFS) were used. CFS renders a highly visible image invisible. In CFS, one eye is presented with a static stimulus, while the other eye is presented with a series of rapidly changing stimuli, such as mondrian patterns. The result is that the static stimulus becomes suppressed from conscious awareness by the stimuli presented in the other eye. We used a customized device with smartphone and google cardboard instead of stereoscope to trigger CFS. In Experiment 1-1, we reenacted some study to validate our experimental setup. Our experimental setup produced the duration of stimulus suppression that were similar to those of preceding research. In Experiment 1-2, we reenacted a study for attention without consciousness using an customized device. The results showed that attention without consciousness more strongly work as a cue. We think that it is reasonable to use CFS treatment employing smartphone and google cardboard for a follow-up study. In Experiment 2, when performing the change detection task, we measured the effect size of consciousness and attention by manipulating the consciousness level of cue. We used the method in which everything but the variable of interest kept being fixed. That way, the difference this independent variable makes to the action of the entire system can be isolated. We found that there was significant difference of correct response rate on change detection performance among different consciousness level of cue. In this study, we investigated that not only the role of attention and consciousness were different also we were able to estimated the effect size.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.