• 제목/요약/키워드: Work path

검색결과 814건 처리시간 0.028초

가정배달 노인급식서비스 작업공정관리 모형개발을 위한 PERT-Type System의 적용 (Application of a PERT-Type System on Work Management in Home-Delivered Meals Service Program for Elderly)

  • 양일선;채인숙;유일근
    • Journal of Nutrition and Health
    • /
    • 제34권6호
    • /
    • pp.701-714
    • /
    • 2001
  • The purpose of this study was to apply a PERT-type system, a combination of the project evaluation and review technique(PERT) and critical path method(CPM) on the employees' work time management of flood preparation, assembly, transportation and cleaning in home-delivered meals program for elderly The resources allotment heuristic program was developed by considering the number of employees and cooking utilities, being limited resources of home- delivered meals program. This program could assign the employees to perform the works included in flood preparation, assembly, transportation ind cleaning. Critical path and activities ware identified by PERT-type system on the basic of work time investigation in five senior centers. Work sheets were invented to perform the work by the shortest path with flexible employees'maximum flow As a result of the work time investigation, the most prevalent activities were ones of preparation in center C and E. Besides, the preparation(over fifty percent) was the most proportion among flood preparation, assembly, transportation and cleaning in center C and E. Critical path and activities of 'C'center were cucumber in sauce preparation path and assembly, wrapping in assembly path and case delivery in transportation path. Critical path and activities of 'E'center were Pan-fried Potato Preparation Path and assembly, case covering, wrapping in assembly Path. The work sheet invented by the heuristic program and PERT-type system reduced the work completion time and man hours in both centers.

  • PDF

방사성 폐기물 작업 중의 피폭서량 예측 프로그램 개발 (Development of Exposure Level Prediction Program in Radioactive Waste Work)

  • 박원만;김윤혁;황주호
    • 대한인간공학회지
    • /
    • 제24권2호
    • /
    • pp.71-77
    • /
    • 2005
  • In spite of the importance of nuclear power as one of major electric energies in Korea, the nuclear safety has become the most serious social issue in the operation of the nuclear power plant. In this paper, a virtual work simulation program was developed to predict exposure dose during radiation work in radwaste storage. The work simulation program was developed. using $Java ^{TM}$applet and VRML-virtual reality modeling language. A numerical algorithm to find the optimal work path which minimize exposure dose during the given work, was developed and exposure dose on the optimal work path was compared with that on the shortest path. Comparing with the shortest path for the given work, the predicted optimal path consumed longer work time by II% but reduced total exposure dose by 46%. The simulation result showed that the exposure dose depended on not only work time, but also the distance between the worker and the radiation source. The developed simulation program could be a useful tool for the planning of radioactive waste work to increase the radiation safety of workers.

지능형 굴삭을 위한 작업정보모델 및 작업경로 시뮬레이터 개발 (Development of a Work Information Model and a Work Path Simulator for an Intelligent Excavation)

  • 김성근;민성규
    • 대한토목학회논문집
    • /
    • 제32권3D호
    • /
    • pp.259-267
    • /
    • 2012
  • 건설자동화 시스템 개발은 건설업이 당면하고 있는 여러 가지 어려움을 해결하고 급변하고 있는 건설환경을 위한 대응책으로 설득력 있는 해결책 중의 한가지로 제안되고 있다. 2006년부터 지능형 굴삭시스템 개발을 위한 연구가 진행되었다. 지능형 굴삭시스템은 작업환경 센싱, 3D 모델링, 작업계획, 작업경로계획, 무인조정 및 정보관리를 위한 다양한 기능을 갖고 있다. 본 논문에서는 지능형 굴삭시스템을 실제 현장에 적용하기 위하여 필요한 요소기술 중의 하나인 작업계획 및 작업경로계획 기능구현을 위한 공간정보모델과 작업경로 시뮬레이터를 제시하고자 한다. 기존의 자료구조인 쿼드트리나 옥트리 구조가 갖고 있는 단점을 보완하기 위하여 토공작업을 위한 새로운 자료구조를 제시하였다. 작업경로 시뮬레이터는 작업환경에 관한 정보, 토공장비에 관한 정보를 제공하며 작업자의 휴리스틱을 고려하여 효과적인 작업경로를 생성할 수 있다. 시뮬레이터에 의하여 생성된 작업경로와 굴삭기 운전자가 제안하고 있는 작업경로를 서로 비교하였다.

Characteristics of solutions in softening plasticity and path criterion

  • Chen, G.;Baker, G.
    • Structural Engineering and Mechanics
    • /
    • 제16권2호
    • /
    • pp.141-152
    • /
    • 2003
  • Characteristics of solutions of softening plasticity are discussed in this article. The localized and non-localized solutions are obtained for a three-bar truss and their stability is evaluated with the aid of the second-order work. Beyond the bifurcation point, the single stable loading path splits into several post-bifurcation paths and the second-order work exhibits several competing minima. Among the multiple post-bifurcation equilibrium states, the localized solutions correspond to the minimum points of the second-order work, while the non-localized solutions correspond to the saddles and local maximum points. To determine the real post-bifurcation path, it is proposed that the structure should follow the path corresponding to the absolute minimum point of the second-order work. The proposal is further proved equivalent to Bazant's path criterion derived on a thermodynamics basis.

입상토의 응력경로 의존거동 (Stress-Path Dependent Behavior of Granular Soil)

  • 정진섭;권원식
    • 한국농공학회지
    • /
    • 제40권1호
    • /
    • pp.106-117
    • /
    • 1998
  • The nature of stress-path dependency, the principle that governs deformations in granular soil, and the use of Lade's double work-hardening model for predicting soil response for a variety of stress-paths have been investigated, and are examined The test results and the analyses presented show that under some conditions granular soils exhibit stress-path dependent behavior. For stress-paths involving unloading or reloading, the stress-path with the higher average stress level produces the larger strains, whereas all stress-paths having the same intial states of stress, and involving only primary loading conditions, produce strains of similar magnitudes. Experimental evidence indicates that the stress- path dependent response obtained from the double work-hardening model is also observed for real soils. It is concluded that the influence of stress history on the friction angle is negligible and the strains increment direction is uniquely determined from the state of stress but is not perpendicular to the yield surface. The strains calculated from Lade's double work-hardening model are in reasonable agreement with those measured.

  • PDF

곡면 다듬질에서 접촉해석에 근거한 유연공우 경로 설정 (Determination of Flexible Tool Path in Curved Surface Finishing Based on Contact Analysis)

  • 조성산;이승영;유용균
    • 한국정밀공학회지
    • /
    • 제17권11호
    • /
    • pp.69-74
    • /
    • 2000
  • Roughness of curved surfaces finished with flexible tools depends on the tool/work contact pressure and area. In this study, non-Hertzian closely conforming elastic contact theory is employed to analyze the tool/work contact and to generate a tool path producing a constant pressure at initial contact points. Finishing experiments on curved surfaced are conducted using the tool path. For comparison, curved surface finishing is also performed along the tool path producing a constant tool/work interference depth. It is demonstrated that the tool path of constant contact pressure improves the finished surface roughness.

  • PDF

방사성 폐기물 저장시설에서의 방사선 작업 중 피폭선량 최소화를 위한 최적 작업경로 계획 (Planning of Optimal Work Path for Minimizing Exposure Dose During Radiation Work in Radwaste Storage)

  • 박원만;김경수;황주호
    • Journal of Radiation Protection and Research
    • /
    • 제30권1호
    • /
    • pp.17-25
    • /
    • 2005
  • 원자력 발전의 안정성이 사회적 문제로 제기된 이후 작업종사자에 대한 작업 중 방사선 피폭량에 대한 관심이 높아지고 있다. 현재의 방법에 의하면 방사선 작업 계획의 수립 시 작업 공간 내 선량률이 일정하다는 가정 하에 피폭선량을 예측하므로 작업 경로에 따른 피폭선량의 변화에 대한 고려가 이루어지지 않고 있다. 본 연구에서는 작업자와 선원과의 거리가 고려되 수정된 방사선 피폭량 계산식을 이용하여 방사성 폐기물 저장시설에서의 작업 중 작업경로 변화에 따른 방사선 피폭량을 계산하였다. 이 계산식을 이용하여 주어진 작업 공간과 선원 조건하에서 작업 중 방사선 피폭량을 최소로 하는 최적 작업경로를 탐색할 수 있는 수치해석 알고리즘을 제안하였다. 이를 위하여 2차원 작업공간에서 무한개의 작업경로를 유한개의 경로로 근사화하고 근사화된 모든 작업경로 중 피폭선량이 최소가 되는 작업경로를 탐색하였다. 또한, 3차원 그래픽 기술과 Java 프로그래밍을 이용한 가상작업 시뮬레이션 프로그램을 개발하고 작업 공간의 선량률 가시화 및 가상 작업 시뮬레이션을 수행하여 방사선 작업 계획의 수립을 위한 도구로서의 가능성을 검토하였다. 수치해석 계산과 시뮬레이션 과정을 통하여 최적 작업경로는 작업자와 선원과의 거리를 증가시키고 작업 시간을 단축시킬 수 있는 경로로 제시되었고, 이를 바탕으로 방사선 피폭량은 작업시간뿐만 아니라 작업자와 선원간의 거리에 영향을 받음과 최적화된 방사선 방호를 위해 작업경로가 고려되어야 함을 확인하였다.

물류량을 고려한 마감공사 자재운반의 실시간 경로탐색 최적화 연구 (Optimization of real-time path finding for material handling of finishing work considering the logistics flow)

  • 김완섭;이동민;김태훈;조훈희;강경인
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.170-171
    • /
    • 2015
  • Resource procurement and material handling are considered as a significant part of construction project especially in large or tall building construction site. There are multiple variables that must be considered in a construction site during finishing work such as movement of materials, equipments, and workers. Therefore, it is difficult for construction workers to find the material handling path solely by intuition. The aim of this study is to propose a real-time path finding model suitable for complicated logistics flow in the field. The model explores the optimal transport path of finishing material with its basis on optimization algorithm, and it determines the direction of the Smart Sign. The proposed model is expected to be utilized for planning of efficient finishing material handling.

  • PDF

복수의 동적 장애물에 대한 이동로봇의 최적경로설계 (Optimal Path Planning of Mobile Robot for Multiple Moving Obstacles)

  • 김대광;강동중
    • 로봇학회논문지
    • /
    • 제2권2호
    • /
    • pp.183-190
    • /
    • 2007
  • The most important thing for navigation of a mobile robot is to find the most suitable path and avoid the obstacles in the static and dynamic environment. This paper presents a method to search the optimal path in start space extended to time domain with considering a velocity and a direction of moving obstacles. A modified version of $A^*$ algorithm has been applied for path planning in this work and proposed a method of path search to avoid a collision with moving obstacle in space-tim domain with a velocity and an orientation of obstacles. The velocity and the direction for moving obstacle are assumed as linear form. The simulation result shows that a mobile robot navigates safely among moving obstacles of constant linear velocity. This work can be applied for not only a moving robot but also a legged humanoid robot and all fields where the path planning is required.

  • PDF

비정형작업 근골격계질환 위험요인의 노출평가: 일부 병원근로자에 대한 PATH-KOSHA 관찰도구 적용사례 (Exposure assessment of musculoskeletal disorder risk factors in non routinized work: An application of PATH-KOSHA observational tool to hospital workers)

  • 박정근;한영선
    • 한국산업보건학회지
    • /
    • 제19권4호
    • /
    • pp.412-422
    • /
    • 2009
  • This study was conducted to assess exposure to musculoskeletal disorder(MSD) risk factors in hospital personnel who performed non-routinized work tasks. A tool ("PATH-KOSHA" version) was newly revised from PATH(Posture, Activity, Tools and Handling) method and uploaded into a personal digital assistant(PDA). The version was used, on a basis of direct-observation, to collect PATH data at the 2 hospital settings in different regions. Job analysis was performed to get various information (e.g., work and rest time, task type) as well. The data collected were visually checked for data cleaning and stored for future data analysis. A total of 1,992 PATH observations were made for 37 hospital workers. Exposure levels varied across 18 items of the MSD risk factors. The highest percent time spent on non-neutral postures was 53% for wrist deviation, followed by 47%(pinch grip), 35%(trunk posture), 23%(neck posture), and 20%(shoulder/arm posture). The highest percent time spent among hand activity level(HAL) variables was 55% for HAL-cat2 (HAL: 3.3 - <6.7). The percent time of items with respect to both loads with more than 5kg and contact stress was less than 4%. Vibration was not exposed in the study workers. Different aspects were discussed for findings. The study results showed that wrist deviation was highest in percent time spent on awkward posture while HAL-cat2 was highest in hand repetition. The study suggests that distal upper extremity posture and HAL should be primarily addressed and controlled in non-routinized work including the hospital settings.