• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.421-426
• /
• 2003

Micro-suing that used on micro mechanism should be equal to distance between pitch and correct of shape. Therefore, micro spring must make by super-precision working. But, current step of super-precision processing depends on special quality of work piece and is ineffective the aspect of cost and productivity yet. Also, to use as demandable length shearing process perform but even if make precision spring, in the aspect of quality of coil spring make difficult that produce product of good quality. Therefore, purpose of this study presented proposed process that extract the point of processing factor after perform finite element analysis applying existing sheet shearing process to suing shearing process consider cost and productivity after evaluate.

• Journal of Welding and Joining
• /
• v.4 no.2
• /
• pp.40-46
• /
• 1986

This investigation is concerned with the toughness and microstructure of manneristically simulated HAZ in 12% Cr steel. Unnotched specimens were subjected to weld thermal cycles a weld simulator. The parameters-peak temperatures, cooling rate, influence of PWHT and plastic deformation were considered. After weld simulation, the specimens were heat-treated, V-notched and impact tested. An optical metallographic examination was performed to correlate the HAZ toughness with microstructure. Also a fractographic examination was done to obtain information on the fracture mode. The toughness of the coarse grained zone and the part of HAZ subjected to a peak temperature range 700-800.deg. C are lower than the other parts. However, they are still high enough. The double PWHT cycle could not improve the HAZ toughness in present study. However, if the first PWHT is conducted before the work piece is cooled below $M_f$, it is expected that the double PWHA may be beneficial to the toughness of the HAZ. It is also expected that martensitic welding can be used on production welds.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.337-344
• /
• 2007

This study explored contemporary furniture theory and practice in Postmodernism mentioned as one of a kind furniture based on ideas from the tradition since Modernism. Qualitative conceptual analysis as the principal methodology was used to explore the postmodern furniture adopting or reflecting ornament from the tradition presented as postmodern furniture designers' point of view differently and variously. Thus, the examples about one of a kind or one-off furniture were dealt with Postmodern ideas appeared in the doubt over Modernism, Post-Modern furniture ideas from the traditional and Modern architecture, ornamental ism, Postmodern theorists, Postmodern furniture and the criteria. As a result, although one of a kind furniture design appealed newly from and based on the ornament of the tradition has been identified as new design like one of a kind furniture which shows lack of function, the piece with the meaningful ornament makes people happier in their daily life. Hence, one of a kind furniture, a work of art, has been required as striking a balance both function or comfort and aesthetics or beauty which makes the people more enjoyable.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.88-95
• /
• 1997

This study provides the useful actual data instead of the experience data using in industrial fields. Especially, values of each components of cutting force are effective in the rake angle, setting angle and cutting area. Many researches have been made on the work piece materials, kinds of bite materials, rake angle, nose radius and depth of cut, but a few on the bite setting angle. In order to select optimal cutting speed, it was summarized the following results are achieved; A chieved that an affect of cutting resistance on the setting angle is a little under giving experimental conditions and therefore a worker can be choose the value of it randomly.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.21-25
• /
• 2004

This study deals with the characteristics of wire-cut EDM(Electrical Discharge Machining)process in aluminum alloys. Besides 2 series and 7 series of aluminum alloys for aerospace applications, porous aluminum is tested, which is used for sound absorbing matherial and interior and exterior material of building. Jinyoung JW-30 wire cutting machine was used in this experiment. Tap wate passed a filter and ionization was used as the discharging solution. An immerision method was applied as a cooling method because it separates chips effectively and machinability is good even with low value of electric current. The speed of fabrication was estimated by measuring the travel distance of the work piece and time spent for the movement. As pulse-on-time increased the fabrication speed decreased. On the other hand, as peak voltage of peak current increased the fabrication speed increased. In general 7075 aluminum alloy resulted in higher fabrication speed.

• Korean Institute of Interior Design Journal
• /
• no.34
• /
• pp.10-19
• /
• 2002

The sublime as one of categories of aesthetics has given a great influence over art. Particularly, painters of Color-field Abstract, which can be considered as the art of the sublime, have tried to sublimate their art to the level of spirituality through expression of sublimity. The purpose of this study is to grasp distinctive peculiarities of sublimity expressed by Rothko, a Color-field painter, in his architectural work, Rothko Chapel, and manifested by Feldman through his musical piece, also titled Rothko Chapel, respectively.In conclusion, it is found that sublimity was expressed in both works through ‘immobile procession’ corresponding to ‘dualism’ of the sublime as Kant defined. More specifically, it is clarified that such immobility was expressed through the attributes of the sublime as suggested by Burke, and they implied dualism.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.112-119
• /
• 2004

The purpose of this study is to grasp musical expression in the Monastery of La Tourette, an architectural work produced by an architect, Le Corbusier and a musician, Iannis Xenakis based on a musical piece, Metastasis. The results of the study on musical expression in the Monastery of La Tourette, which was done through analysis of correlation in expression between architecture and music, and spatial characteristics of this monastery, are as follows: First, in modern architecture and music, the expression of the space-time continuum concept is emphasized. Second, the architectural characteristics in this monastery that constitute musical expression are the Modular, confliction and fluidity in composition, plastic (acoustic) shape and symbolic shape. Third, these architectural characteristics are found to be expressed as counterpoint, alteration, temporality, acoustics and canon of music.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.29-35
• /
• 2010

Recently the industry high-speed machining has been applied to the automotive, aircraft, electronics parts machining because the effect of cost savings, machining time reduction and productivity improvement. In this study recently the aircraft structural aluminum alloy 7075 used in cutting the ball end-mill on the surface roughness terms most affect the parameters of the spindle speed and feed rate on the surface roughness of the work-piece according to the cutting depth is to investigate. Cutting depth at 0.3 mm has the lowest surface roughness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.565-565
• /
• 2013

Free burning arcs where the work piece acts as an anode are frequently used for a number of applications. Our investigation is exclusively concerned with a simplified unified model of arcs and anode under steady state conditions at atmospheric pressure. The model is used to make predictions of arc and anode temperatures and arc voltage for a 200 A arc in argon. The computed temperatures along the axis between the cathode tip and the anode surface compare well the measured data. This knowledge of free burning arcfeatures can play a role in developing the atmospheric plasma systems, however, further investigation should include the modelling of Cu evaporation from anode and non-LTE situation near electrodes for more realistic calculations.

• Journal of Computing Science and Engineering
• /
• v.2 no.3
• /
• pp.221-248
• /
• 2008

Data provenance is the background knowledge that enables a piece of data to be interpreted and used correctly within context. The importance of tracking provenance is widely recognized, as witnessed by significant research in various areas including e-science, homeland security, and data warehousing and business intelligence. In order to further advance the research on data provenance, however, one must first understand the research that has been conducted to date and identify specific topics that merit further investigation. In this work, we develop a framework based on semiotics theory to assist in analyzing and comparing existing provenance research at the conceptual level. We provide a detailed review of data provenance research and compare and contrast the research based on d semiotics framework. We conclude with an identification of challenges that will drive future research in this field.