• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.42-49
• /
• 1988

Anatomical characteristics on abnormal type of bisected compression woods and light colored wood intervened between these dark colored compression woods on under part and their respective opposite woods on upper parts of cross section in Pinus densiflora S. et Z. stem were compared through optical microscopic investigation. and the obtained results were summarized as follows: 1. Tracheid length increased linearly as the number of rings from the pith increases in all investigated parts, but increasing tendency in tracheid length was similar within bisected two compression woods and their opposite woods. 2. Tracheids were the shortest in bisected two compression woods and tracheid length in intervened wood between these two compression woods was longer than in compression woods but shorter than in the opposite woods. 3. Bisected two compression woods and intervened wood between these two compression woods revealed similar features in tracheid transition from springwood to summerwood, intercellular space, tracheid entanglement, and cross sectional view of tracheid. but spiral check was observed only in these two compression woods, therefore the intervened wood between these two compression woods disclosed anatomical characteristics similar to, not typical of, compression woods.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.62-71
• /
• 2010

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The object of the research was to design living products with heat treated woods. The results were as follows. Specific gravities of green woods were in range from 0.87 to 1.12. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $170.37N/mm^2~107.07N/mm^2$ and $122.78N/mm^2~61.27N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. The modulus of elasticity (MOE) of heat treated woods showed higher than those of never treated woods.

• Journal of Plant Biology
• /
• v.29 no.3
• /
• pp.185-196
• /
• 1986

Anatomical characteristics of the secondary xylem in the roots and the stems of genus Pinus including nine species growing naturally in Korea have been studied to elucidate the structural differences between two organs. The results, comparing the root woods with the stem woods, are as follows; The transition from the early-wood to the late-wood occurs more gradually in the root woods. In the root woods, the bordered pits on the radial wall of tracheid are frequent in the two rows. The spiral thickening on the radial and tangential wall of the tracheid can be seen in the only stem woods of four species such as P. koraiensis, P. rigida, P. rigitaeda and P. banksiana. In the majority of the species studied, the length of the tracheid is longer in the root woods, but in some species such as P. strobus, P. densiflora, P. rigida and P. sylvestris, this length is almost sam ein both organs. The diameter of the tracheid in the root woods is wider. The wall thickness of the tracheid in the early wood is thicker in the root woods, but vice versa in the late woods. More rays per unit area can be seen in the root woods.

• Journal of the Korea Furniture Society
• /
• v.20 no.5
• /
• pp.457-466
• /
• 2009

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $176.4N/mm^2{\sim}102.8N/mm^2$ and $100.1N/mm^2{\sim}61.2N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.82-94
• /
• 2009

In this study, I suggest dyed-Glued laminated woods by using birch woods which are relatively cheaper than others. Since the dyed-Glued laminated woods which have the various colors to satisfy people's tastes and the dignified grains in the old woods enable us to product freely, these can provide us with stability of supply through replacing rare materials. The making wooden furniture designed with dyed-Glued laminated woods has these following characteristics. (1) This method which uses various colored woods can fulfill consumers' tastes through dyeing wooden plates, instead of using domestic woods which have limited colors-white, yellow and black. (2) Gathering wooden plates made by setting them into various frames enables us to get in large quantities of the materials with good grains, which we can only take from old woods. (3) Producing culture products using various colors and grains has enabled us to satisfy consumers and to create pro-environmental pieces. In conclusion, this study can be an alternative idea to forest resources which have been decreasing, and be an application method of using cheaper birch woods as well. Gathering and dyeing wooden plates might bring about the economic effect and be of much help to the expansion as furniture materials as well as interior ones.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.57-67
• /
• 2012

Recently, shows the possibility of providing such dyed-gathered woods after forming single boar This studyds with using cheap timbers generated by the thinning. It is helpful for master artisans are suffering from finding qualified materials. Traditionally, the master artisan has been used the beautiful grained wood from around roots of old zelkova trees and black persimmon trees. Instead, this study shows that dyed-gathered woods replace the natural grained wood and also produces a furniture made of an aggregate and a plate from walnut trees and ash trees which are a contrast to dyed-gathered woods. Dyed-gathered woods can reproduce the various colors to satisfy people's tastes, and the dignified grains that we can see in the old woods. Besides, dyed-gathered woods can replace rare materials and provide higher reliability of supplies.

• Journal of the Korean earth science society
• /
• v.29 no.7
• /
• pp.531-538
• /
• 2008

The mode of occurrence of petrified woods from the Tertiary strata of Pohang Basin in Kyeongsangbug-do suggests that the petrified woods are all allochthonous fossils. Petrified woods as well as various types of wood fossils such as carbonized woods and charcoal woods were found. However, some lignified organic remains are rarely found in the bark part of petrified woods. X-ray diffraction analysis showed three types of minerals including Opal-CT, Opal-C, and quartz+cristobalite. The presence of these minerals indicates that silicification occurred under the low temperature. The tuffs are considered to be main source of supply of silica. Analysis of the kind of composing minerals and the condition of tissue preservation can predict that silicification is mainly occurred by replacement.

• Journal of architectural history
• /
• v.16 no.1
• /
• pp.9-28
• /
• 2007

We investigated the changes in the species of the woods used for Korean ancient and historic architectures, which include prehistoric excavated relics and existing wooden buildings in South Korea. The species data were collected from various sources such as excavation and repair reports, journal papers, and a few unpublished documents. We divided the building Periods as Paleolithic, Neolitic, Bronze Ages, Iron Age/Three Kingdoms, Koryo, Joseon (early, middle, late) and modem periods. In prehistoric periods, hardwoods were major species. Oak (Quercus spp.) woods dominated (94 percent in average); the others (5%) were Juglans mandshurica, Platycarya strobilacea, Castanea crenata, and few softwoods(1%). During Iron Age and Three Kingdom periods, oaks remained as a major species (57%) and others Platycarya strobilacea(21%), Castanea crenata(13%), and Pinus spp. (6%). The oak woods decreased in Koryo period and they occupied only 1.1%. Instead of oaks, pine (Pinus spp., 71%) and Zelkova serrata (22%) dominated in Koryo. In early and middle Joseon periods, pine woods (73%) remain as a major species and the others were oaks (14%) and Zelkova serrata (9%). As late Joseon came, the pine woods occupied more than 88%. In the late 19th and early 20th centuries, a few boreal species such as larch (Larix spp.) and spruce (Picea spp.), which grow in cold area, were found. We believe they were transported from northern Korea. The existing buildings in Korea are mainly from Joseon period and a few from late Koryo periods. During these periods, pine woods were used for most buildings. For such reason, pine woods were known as 'representative materials for historic buildings'. but earlier times, broad-leaved trees, i.e., oak and Zelkova woods were major materials. The changes in building materials resulted from both climate and human impacts. The dry climate and disturbed forests induce more pines in the mountains. We also compared the wood qualities of the species and found that Zelkova woods were superior ones and deserved more planting for future demands in the repair for historic buildings.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.43-49
• /
• 1997

The lengths of fibers and vessel elements, vessel diameters, and ray spacings of tension and opposite woods in Quercus mongolica Fischer and their radial variations were examined. Crystallinity indices and crystallites orientations of tension, opposite and lateral woods were also investigated. The lengths of fibers and vessel elements, and ray spacings of tension wood were longer and denser than those of opposite wood, respectively. In the latewood, the vessels of tension wood had a little larger diameters than those of opposite wood. whereas the vessel diameters of earlywood were similar in both woods. With the exception of vessel diameters of earlywood, there were differences between tension and opposite woods in all anatomical characteristics examined. In the radial variation pattern, the fiber lengths of both woods increased markedly to about 15th annual ring and thereafter remained virtually constant. The vessel element lengths of earlywood in tension wood increased to certain annual ring and thereafter were stabilized, but opposite wood had a relatively constant trend from pith to bark. Those of late wood in both woods increased to certain annual ring and thereafter showed constant patterns. Vessel diameters appeared to show similar trend in both woods. Ray spacings decreased to about 15 annual ring and thereafter were stabilized in both woods. In the fine structures, tension wood had higher crystallinity index and better crystallites orientation than opposite and lateral woods.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.23-32
• /
• 1999

The ultrastructural characteristics of shear fracture surfaces of laminated wood prepared from major four Korea wood specimens were examined. Commercial urea and urethan resin were used as adhesives for laminated woods of both homospecies and heterospecies. The morphology of fracture surface was observed using an optical microscopy and scanning electron microscopy. Three anatomical failure types were recognized : intercell failure, intrawall failure and transwall failure. In dry specimen, failure occurred mainly in woods. Laminated woods of softwoods showed mostly intrawall failure and transwall failure of tracheids, and them of hardwoods indicated mainly intrawall failure and interwall failure. Laminated woods prepared with urethan resin showed coarse fracture surface, on the other hand, those prepared with an urea formaldehyde resin had clean surface. In wet specimen, failure occurred dominantly in glue line. Intrawall failure and flags were characterized in laminated wood prepared with urethan resin. In heterospecies laminated woods, failure was occurred mainly in softwood. Consequently, fracture morphology of laminated wood may be influenced by adhesives, moisture content, species and anatomical characteristics.