• 펄프종이기술
• /
• 제47권3호
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.21-24
• /
• 2014

In this study, we have investigated the maximum smoke density and the initial stage smoke density in order to see the characteristics of smoke release of the architectural surface materials and the architectural adhesives, using smoke density chamber. As a result of the study, polyurethane foam showed the highest smoke density index, 206.55 within 10 min. In the case of the other samples, reinforced styrofoam was followed as 39.90, general styrofoam 33.73, and glass fiber 5.40, respectively. In the intial stage of a fire, it is forecasted actually to give hardship at the clear visibility. In the case of architectural adhesives, the highest ranking was those for windows and doors 509.64, stone 275.63, wood 232.25, tile 18.65, and styrofoam 6.44 were followed, respectively. This result is an early research to show characteristics of smoke release through experiment. However, it is meaningful that this study can be used as a basic for further study on architectural fire hazard prediction.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.1-7
• /
• 2005

The objective of this work was to investigate the effect of spreading behavior of the sizing agents (AKD or dialkyl ketone) on the sizing development of AKD-sized paper. There was a direct relationship between the spreading behavior of the sizing agents and their melting points. Both AKD and dialkyl ketone showed no substantial spreading until the temperature reaches to their melting points. Consequently, dialkyl ketone did not provide sizing development when the paper was heat-treated below $75^{\circ}C$, while AKD provided sizing effect even the paper heated at $50^{\circ}C$. The ketone, however, provided rather higher sizing effect than that of AKD, when the paper was heat-treated over $100^{\circ}C$. This result means that the ketone also gives sizing development to paper, moreover the ketone could give higher sizing effect to paper than AKD when it was melted and well spreaded on the fiber surface. While the ketone introduced to papers from hydrolyzed AKD emulsion could not contribute to sizing development.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.1-7
• /
• 2000

Alkaline Sizing behavior and mechanism of handsheets, which were prepared from thermomechanical pulp (TMP) with alkylketene dimer (AKD), were studied in terms of the conditions of the handsheet-making. AKD content in the TMP handsheets was increased with increasing of AKD addition level and the addition of a polyamideamine-epichlorohydrin resin (PAE) clearly enhanced AKD retention as well as the resultant sizing performance of TMP handsheets. Although drying of the AKD sized TMP webs at $20^{\circ}C$ led to no or quite low sizing level, but TMP handsheets sized with AKD had higher sizing degrees with increasing of the temperature of heat treatment. Scanning electron microscopic observations of the AKD-sized TMP handsheets showed that AKD emulsion particles were present on pulp fiber surfaces independently without coagulation in the TMP handsheets dried at $20^{\circ}C$. Heat treatment of the AKD-sized handsheets resulted in disappearance of the AKD emulsion particles because of their melting and spreading. The addition of calcium carbonate filler to the TMP suspensions did not influence on AKD content in the TMP handsheets. Nevertheless, their sizing degrees clearly increased by the addition of $CaCO_3$filler. Probably, AKD molecules adsorbed on the $CaCO_3$filler particles contribute to the enhancement of sizing performance. Thus, AKD can give sizing features effectively to the TMP handsheets, when they are made under suitable conditions.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.30-37
• /
• 2007

The seed paper was used in farm field recently for a sound young plant. The most of seed paper are made of synthetic non-woven sheet. Therefore, it is very difficult to bio-degrade in soil and is very hard to have some special function, for example keeping herbicide and/or insecticide activity because of its lack of chemical acceptability. The purpose of this research is manufacture of seedling paper which have a function of herbicide activity from waste paper. The fiber properties from waste paper were remarkably improved by fine removal with washing and/or flotation process. The paper-making ability for seed paper was enhanced with enzyme treatment of secondary fibers. The paper for seedling must have a good bio-degradation ability in soils. The absorption amount of chemical like as dithiopyr was increased remarkably in enzyme treated base paper. The embossing treatment of base paper was very effective for seed attachment and chemicals retention. And also, the developed seed paper showed a good penetration property of young root through embossed paper.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.35-42
• /
• 2014

Many historical archives have been deteriorated by aging with time. Various kinds of defects such as worm-hole, yellowing, brittleness are observed and their severity was dependent on raw material type, storage condition, and so on. For a long-term use and storage, a proper preservation treatment is required. Many studies on preservation and conservation have been carried out on hanji which was made from mulberry fiber, but there are few concerns on foreign paper. Therefore, aging and chemical strengthening treatment was done on paper made of bamboo and wood fibers depending on aging condition, the type and pickup weight of chemicals and treatment method. When methyl cellulose was treated with impregnation or brushing, the aged paper was strengthened effectively. The strengthening effect by chemicals was dependent on the aged condition of the paper.

• 한국농촌건축학회논문집
• /
• 제23권4호
• /
• pp.63-71
• /
• 2021

The purpose of this study was to investigate whether the standard models for rural housing and wooden housing model have performance for hygrothermal and to propose a way of improvement relevant to hygrothermal performance for those models. All of the models to be analyzed were found to have some parts that were absent of stability in terms of performance for hygrothermal. In the process of analyzing the causes and proposing improvement measures, the following conclusions were derived. Fist, The exterior surface of the structure should be composed of a structure with good moisture permeability, and for the interior surface, a variable vapor retarder paper should be applied in consideration of the reverse condensation phenomenon in summer. Second, in terms of performance for hygrothermal, applications of external insulation plaster finish to the exterior wall or of ventilation method using a rafter vent on the roof should be avoided. Third, a rain screen method with a ventilation layer should be applied to the exterior wall, and a method of constructing ventilation layer separated from the insulation layer with a vapor retarder paper should be applied to the roof. Fourth, the application of insulation materials having capillary action, such as wood fiber insulation board or cellulose insulation board, contributes to more stable performance for hygrothermal.

• 임산에너지
• /
• 제1권2호
• /
• pp.1-19
• /
• 1981

In order to investigate biomass yield of one-year-old hyblrid poplars, Pripulusalba x P. glandulosa $F_1$ and Populus nigra var. italica x P. maximowiczii $F_1$clones, as energy and fiber resources, dry matter yield, leaf area, leaf area index, dry matter production ability, specific gravity and fiber length and width were measured. Dry matter yield was 1.89 ton/ha for Poplus alba x P. glandulosa $F_1$ and 3.63 ton/ha for Populus nigra via.italica x P. merximowiczii $F_1$ clones in the planting density of 20,000 trees/ha and in the planting density of 40,000 trees/ha was 3.87 ton/ha for Populus alba x P. glandulosa $F_1$and 5.64 ton/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. Leaf area index was 1.24mtim2 in the planting density of 20,000 trees/ha and 2.45 m31m3 in the density of 40,000 trees/ha for Populus alba x P. glandulosa $F_1$ clones and it was 1.96 m21m2 in the planting density of 20,000 trees/ha and 3.36 m21m2 in the density of 40,000 trees/ha for the hybrid $F_1$ Populus nigra var. italica x P. maximowiczii clones. The average specific gravity of the hybrid poplars was 0..36 when bark and pith were included and 0.31 when bark and pith were removed in the plot of 20,000 trees/ha and in the 40,000 trees/ha plot showed 0.35 and 0.31 respectively, for Populus alba x P. glandulosa $F_1$clones. It was 0.36 when bark and pith were included and 0.32 when bark and pith were removed in the 20,000 trees/ha plot and in the 40,000 trees/ha plot was 0.34 and 0.31 respectively for Populus nigra var. italica x P. maximowiczii $F_1$clones. The average fiber length was 0.57 mm in the 20,000 trees/ha plot and 0.58 mm in the 40,000 trees/ha plot for Poplus alba x P. glandulosa $F_1$clones and was 0.60 in both plots of 20,000 trees/ha and 40,000 trees/ha for Populus nigra var. italica x P. maximowiczii $F_1$ clones. There is a big clonal variation among those clones studied, showing high selection potential in both species.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.602-608
• /
• 2006

폴리아크릴로니트릴(PAN)계 탄소섬유와 목재펄프를 이용하여 탄소섬유의 길이와 함량 및 강화 종이의 평량을 달리하여 각각 탄소섬유 강화 종이를 제조한 후 탄소섬유와 펄프섬유와의 접착특성 및 강화 종이의 물리적 특성과 전기전도도를 조사하였다. 탄소섬유 강화 종이의 형성은 탄소섬유와 펄프섬유의 계면에서의 화학적 결합이라기보다는 물리적인 얽힘과 접착이었으며, 탄소섬유의 첨가량을 증가시키면 강화 종이의 두께와 인열강도는 증가하는 반면 인장강도와 파열강도는 감소하였다. 탄소섬유의 길이가 짧을수록 강화 종이 내에서 섬유의 분산성이 양호하였으나 가장 우수한 전기전도도는 탄소섬유의 길이가 10 mm일 때였다. 강화 종이의 전기전도도는 탄소섬유의 함량이 2 wt％일 때부터 급격히 증가하다가 8 wt％ 이상이 되면 서서히 증가하는 S자형 곡선을 보였으며, 강화 종이의 평량 증가에 따라 선형적으로 비례하여 향상되었다. 따라서, 전기전도도와 물리적 특성이 우수한 강화 종이를 얻기 위해서는 탄소섬유의 함량을 증가시킴과 동시에 평량을 증가시키는 것이 바람직하다.

• Journal of the Korean Wood Science and Technology
• /
• 제5권1호
• /
• pp.3-8
• /
• 1977

수피(樹皮)는 원목체적(原木體積)의 약 10~20%를 차지하고 있으며 일반적(一般的)으로 운반(運搬), 제거(除去), 처리(處理)에 따른 비용에 비(比)해 효용가치(效用價値)는 적다. 뿐만아니라 세계적(世界的)으로 임산자원(林産資源)의 부족(不足)함에 따라 Full tree Utilization의 개념(槪念)이 점고(漸高)되면서 수피(樹皮)의 이용(利用)에 많은 관심(觀心)을 갖게 되었다. 본(本) 연구(硏究)는 국내(國內) 참나무속(屬) 수피(樹皮)의 해부학적(解剖學的) 성질(性質)과 그 구조(構造)를 밝혀 수피(樹皮)의 가능(可能)한 이용책(利用策)을 위(爲)한 기본적(基本的) 성질(性質)을 구명(究明)하고자 하는 바이다. 해부학적(解剖學的) 성질(性質)은 일반적(一般的) 특성(特性)으로서 표피(表皮)의 색(色), 탈락의 형태(形態), 주피(周皮)의 색(色)과 배열형태(配列形態), 수피(樹皮) 두께등(等)을 다루었고 현미경적(顯微鏡的) 특성(特性)으로 사관절(篩管節), 반세포(伴細胞), 사부유세포(篩部柔細胞), 사부섬유(篩部纖維), 방사조직(放射組織), 주피조직(周皮組織), 석세포(石細胞)의 유무(有無), 보강세포(保强細胞)의 유무(有無)와 크기, 결정체등(結晶體等)에 대(對)하여 조사(調査) 연구(硏究)하였다. 본(本) 연구(硏究)에서 얻은 결론(結論)은 다음과 같다. 1. 일반적(一般的)으로 수피(樹皮)의 박락(剝落)은 어렵고 내피(內皮)와 외피(外皮)가 쉽게 분리(分離)되지 않으며 수피내(樹皮內)의 보강세포(保强細胞)는 쉽게 육안(肉眼)으로 관찰(觀察)된다. 2. 참나무속(屬) 주피조직(周皮組織)에서 콜크형성층(形成層)과 콜크피층(皮層)의 구별(區別)이 명확(明確)치 않고 굴참나무는 콜크조직(組織)이 가장 잘 발달(發達)되어 있으며 상수리나무 수피(樹皮)는 박막(薄膜)콜크조직(組織)과 후막(厚膜)콜크조직(組織)으로 구성(構成)되어 있다. 3. 참나무속수피(屬樹皮) 사관절(篩管節), 반세포(伴細胞), 사부섬유(篩部纖維)와 보강세포(保强細胞) 및 결정체등(結晶體等)을 가지고 있으며 특(特)히 보강세포(保强細胞)는 소나무속(屬)이나 사시나무속(屬)고 달리 가장 잘 발달(發達)되어 있어 많이 분포(分布)되어 있고 사부섬유(篩部纖維)보다 더 많은 체적점유율을 보이고 있다. 4. 방사조직(放射組織)은 보통 1~3열(列) 조직(組織)이고 간혹 15~20열(列)의 다층방사조직(多層放射組織)이 나타난다. 5. 유세포(柔細胞) 및 보강세포내(保强細胞內)에 다각형(多角形)의 결정체(結晶體)와 생기(生氣)있는 유세포내(柔細胞內)에 괴상화형결정체(塊狀花形結晶體) 존재(存在)한다.