• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.63-72
• /
• 1999

종이에 습윤강도를 부여하기 위하여 셀룰로오스 섬유를 chlorocarbamoylethyl화 한 후 이를 다시 N-chlorocarbamoylethyl화했다. Chlorocarbamoylethyl화는 알칼리 촉매하에서 아크릴 아마이드와의 반응에 의해서 제조되었으며, N-chlorocarbamoylelhyl 화는 차아염소산나트륨 첨가에 의해서 제조되었다. carbamoylelhyl 화에서는 NaOH의 농도와 온도 그리고 아크릴아마이드의 첨가량이 중요한 인자로 작용했으며, carbamoylelhyl화의 초기반응에서는 $40^{\circ}C$온도에서 그리고 알칼리와 아크랄아마이드의 첨가랑이 증가할수록 더 높은 치환도가 나타났다. N-chlorocarbamoylelhyl에 의한 가장 높은 습윤강도는 치환도 0.06에서 sheet의 건조강도에 85%에 해당하는 강도를 나타냈으며, 이를 주사전자현미경을 이용하여 N-chlorocarbamoylethyl sheel의 파단면에서 섬유간 컬합력의 증가로 인한 섬유의 절단을 관찰 할 수 있었다. 그리고, N-chlorocarbamoylelhyl sheet의 재활용을 위하여 습윤강도를 저하시키는데는 차아염소산나트륨이 효과적인 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.163-177
• /
• 2019

폐MDF로부터 해섬하여 얻은 재생섬유를 Reactive Red H-E3B (Bis-monochlorotriazine(MCT)/MCT type)와 Reactive Red RB 133%(bis-monochlorotriazine/Vinyl sulphone type)로 염색할 때 최적의 염색조건을 구명하기 위하여 염색조건(염료 농도, 염과 알칼리 첨가량, 염색온도)과 염색특성 및 일광견뢰도와의 관계를 검토하였다. 2종의 반응성염료 모두 염료농도가 1~10(%,OWF)로 증가함에 따라 염착량(K/S)은 증가하였다. 또한, H-E3B가 RB 133%보다 염료 농도에 관계없이 K/S는 높았으며, 자외선 조사에 따른 색차는 낮아 자외선에 의한 변색 저항성이 양호하였다. 황산나트륨의 첨가량이 증가할수록 색차 및 K/S도 증가하였으며, 염의 첨가량은 50~70 g/L가 적절하였다. 2 g/L의 탄산나트륨 첨가에 의해 색차 및 K/S가 크게 증가하였으나 그 이상의 첨가량 증가에서는 거의 차이가 없었다. 탄산나트륨의 첨가량은 pH 10을 유지하는 5~10 g/L가 적절할 것으로 생각된다. H-E3B 염료는 염색 온도가 높아짐에 따라 염착량이 증가하다가 $80^{\circ}C$에서 다시 감소한 반면 RB 133%는 $60{\sim}70^{\circ}C$까지는 거의 동일한 염착량을 나타냈으나, 이후 감소하였다. 따라서 H-E3B는 $80^{\circ}C$, RB 133%는 $60^{\circ}C$가 적정한 것으로 판단된다. 이상의 최적조건에서 폐MDF 목질섬유를 염색처리하면 H-E3B염료는 1.5~2.0R, RB 133%염료는 9.6~10.0 PR의 색상을 가지는 염색 재생 목질섬유의 제조가 가능하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Journal of Forest and Environmental Science
• /
• 제23권1호
• /
• pp.57-63
• /
• 2007

국내 전통식 탄화로에서 생산된 굴참나무(Quercus variabilis $B_{LUME}$)와 신갈나무(Quercus mongolica $F_{ISCH}$) 흑탄 및 백탄의 해부학적 특성을 주사전자현미경법으로 조사하였다. 흑탄 및 백탄 조재부 도관의 형태는 접선방향으로 수축하여 방사방향으로 긴 타원형을 나타내었으나, 다른 구성세포들의 형태와 구조적인 변형은 보이지 않았다. 만재부 도관은 접선방향으로의 수축은 관찰되지 않았으나, 백탄의 경우 인접세포들의 과도한 수축으로 인해 도관의 형태가 다소 찌그러지는 것이 관찰되었다. 또한 목섬유 부분은 과도한 수축에 의해 세포가 크게 변형된 것을 보여주고 있으며, 조재부도관 내 타일로시스는 백탄과 흑탄에서 모두 관찰되었다. 방사유세포는 세포벽이 상당히 얇아진 모습을 보여주었고, 변형도 심하게 나타났다. 또한 백탄의 경우에는 고온탄화에 의한 세포벽의 수축으로 유세포간 공극이 발생되었다. 단열방사조직과 광방사조직의 경우에는 고온 탄화에 의해 세포벽이 수축하면서 세포내강이 줄어드는 현상이 관찰되었다. 이러한 세포내강이 소실되는 현상은 탄화온도가 높은 백탄에서 자주 관찰되었다. 따라서 흑탄에 비해 백탄의 수율이 낮은 것은 목재성분의 일부 손실뿐만 아니라 탄화온도에 따라 구성세포 치수가 감소하기 때문으로 생각되었다.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.275-282
• /
• 2021

Maleic anhydride (MA)와 divinylbenzene (DVB)을 개시제인 di(tert-butyl-perxoyisopropyl)benzene (PK-14)과 함께 이축 압출기에서 용융 그래프팅 반응을 통해 상용화제인 high-molecular-weight maleic anhydride-grafted polylactic acids (HMMA-g-PLA)를 제조하였다. 제조된 HMMA-g-PLA의 특성을 분석하기 위해 Fourier transform infrared (FTIR), Melt index (MI), 그리고 역적정을 실시하였다. HMMA-g-PLA는 DVB의 함량이 증가함에 따라 MA의 그래프팅율은 증가하나 MI는 감소하였는데, DVB의 도입으로 PLA의 𝛽-scission 반응이 억제되어 분자량이 증가되었기 때문이다. HMMA-g-PLA를 사용한 PLA기반 합성목재(wood-plastic composites, WPCs)는 matrix인 PLA에 보강재인 목재와 무기 충전재인 talc를 첨가하여 일축 압출기로 용융 블렌드하였다. 상용화제인 HMMA-g-PLA가 도입된 WPCs는 도입되지 않은 WPCs와 비교하여 더 높은 굴곡강도 및 충격강도를 보였다. 이것은 Scanning electron microscope (SEM) 분석을 통해 HMMA-g-PLA의 첨가로 PLA와 목분과의 계면 결합력이 우수해졌기 때문인 것을 알 수 있었다. 하지만 HMMA-g-PLA의 함량이 높을 때는 WPCs의 기계적 물성을 악화시켰다. 이는 도입된 HMMA-g-PLA 상용화제의 분자량이 PLA 고분자 수지보다 더 낮아 기계적 물성을 감소시킨 것으로 판단하였다.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.29-37
• /
• 2006

To use bamboo in the pulp industry, the anatomical characteristics of 60-day-old, 1-year-old, 2-year-old, and 3-year-old moso bamboo (Phyllostachys pubescens Mazel), and the characteristics of fiber and sheet of alkali pulp made of moso bamboo were investigated. Moso bamboo is composed of metaxylens and parenchyma cells in the inner part of the wall, and thick-walled small bundle sheathes near the outer walls. Moso bamboo showed the heterogeneity in anatomical structure. The longest fibers were shown in the middle part, and the widest width in the inner part. The lignin contents were 14.4% in 60-day-old bamboo, which was not lignified yet. The lignin contents in bamboo above 1 year were approximately 35%. The yields of alkali pulp of moso bamboo were in the range between 41 and 47%, and the yields tend to decrease with the increase of ages. The lignin contents of 60-day-old bamboo were 2.1% and those of bamboo above 1 year showed approximately 4% to 5% increment. The length, width, and curl index of fiber in alkali pulp appeared to be similar in all ages. However, coarseness increased slightly with the increase of bamboo ages. The distribution of long fiber was shown much in 60-year-old bamboo. The optical and mechanical properties of moso bamboo tended to decrease with the increase of bamboo age.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.60-67
• /
• 2011

Hemicelluloses pre-extracted from Korean mixed wood chip were investigated as a wet-end additive. Hemicelluloses dissolved in hot water and alkali solution were isolated by ethyl alcohol precipitation from pre-extractives. They showed molecular weight of 9,000 ~ 27,000 g/mol as revealed by size exclusion chromatography. The reduction of molecular weight through hot water extraction was caused by autohydrolysis. Chemical composition of the hemicelluloses were analyzed with high-performance liquid chromatography and UV-Vis spectroscopy. As the surface charge of isolated hemicelluloses were negative, the adsorption of hemicelluloses onto softwood unbleached kraft pulp fiber was promoted by poly-DADMAC. The physical properties of handsheets increased as the molecular weight of hemicellulose increased. On the other hands, the optical property decreased with hemicellulose adsorption.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.56-64
• /
• 1997

Since there are three hydroxyl groups on each anhydroglucose ring of the cellulose, the renewable resources, we can get various functional papers by the chemical modification of cellulose. The reaction involving the introduction of the ${\beta}$-cyanoethyl ($-CH_2-CH_2$-CN) group into organic substances containing reactive hydrogen atoms is known as cyanoethylation. Cellulose reacts with acrylonitrile in the presence of strong alkalis in a typical manner of primary and secondary alcohols to form cyanoethyl ethers. In cyanoethylation, important factors of reaction are temperature, concentration of the NaOH, and addition rate of acrylronitrile. FT-IR spectra of cyanoethyl group was confirmed at $2250cm^{-1}$, which corresponds the introduction of aliphatic nitrile group. Effect of cyanoethyl DS(degree of substitution) on strength properties was resulted that cyanoethylated BKP of DS 0.04 appeared to be the best choice for overall strength properties. Also, excellent thermal stability in aging characteristics was obtained.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.39-47
• /
• 2000

This study was carried out to investigate the effect of the type of base papers containing Sw-BDP, HW-BDP and Bamboo-BKP on the properties and printabilities of coated papers. Also it was intended to evaluate the effect of coated paper prepared with anionic and amphoteric latex based coating color. The results obtained from this study were as follows. The fiber length of Bamboo-BKP was observed longer than that of the Hw-BKP and shorter than that of the Sw-BKP. This has effect on physical properties. Therfore the results of mea-suring physical properties were higher ratio of Sw-BKP physical properties tended to be slightly higher with the increase I the mixing ratio. Considering the optical properties of base papers the highest opacity was obtained in case of the Hw-BKP and the second appeared Bamboo-BKP. On the other hand smoothness roughness and air permeability of Bamboo-BKP were lower than those of wood pulp and the optical properties of coated papers tended to show the similar with those of base papers. The ink receptivity and print gloss of the coated papers for Bamboo-BKP were lower than those of wood pulp. As the mixing ratio of Sw-BKP was increased the properties and printabilities were improved slightly. Meanwhile amphoteric latex was improved the optical properties and printability of coated papers.