• 한국연초학회지
• /
• 제22권1호
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.21-26
• /
• 2001

This study was carried out to get some basic information on mechanical properties of Platanus orientalis L. for the rational utilization of this wood. Relationship of anatomical characteristics with compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 8 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: 1. The compression strength parallel to grain increased with the increase of wood fiber length and wood fiber width. The strength, however, decreased with increase of number of pore per $\textrm{mm}^2$ and tangential diameter of pore. 2. The major factors affecting compression strength parallel to grain in heartwood were length of wood fiber and number of pore $per{\;}{\textrm{mm}^2}$ but width of wood fiber and length of vessel element were the important factors in sapwood.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.23-34
• /
• 2003

본 연구는 국산소경재인 소나무(Pinus densiflora)재와 낙엽송(Larix kaemferi)재로 제조된 유리섬유강화 집성재의 강도적 성질을 조사해 보기 위하여 실시되었다. 먼저, 직물 유리섬유를 수성고분자-이소시아네이트계(MPU-500) 접착제를 사용하여 control재와 유리섬유를 각각 1층과 2층 함입하였다. 본 연구의 결과는 다음과 같다. 1. 수성고분자-이소시아네이트 수지는 집성재 제조용으로 적합하였으며, 특히 유리섬유를 2층 함입한 소재를 제외하고는 구조용 집성재의 품질기준(KS F 3021)을 만족시켰다. 2. 직물유리섬유를 함입할 경우 휨강도, 전단강도에서 control재보다 크게 뛰어나지는 않았지만, 비례한도 휨응력은 유리섬유의 함입 층수에 비례하여 증가하였다. 그러므로, 직물 유리섬유의 mesh수와 두께를 집성재 소재의 형태에 따라 적절히 조정한다면, 휨강도와 전단강도를 좀더 향상시킬 수 있을 것으로 판단되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.64-76
• /
• 2013

이 연구에서는 녹차-목재섬유 복합보드의 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여, 목재섬유에 녹차와 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 정역학적 성능에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 휨 강도성능은 백탄함유 복합보드에서 평균적으로 가장 높은 값을 나타내었으나, 숯의 종류에 따른 휨 강도성능의 차이는 크지 않았다. 그러나 그 값은 선행연구의 녹차-목재섬유 복합보드보다 현저한 휨 강도성능의 향상을 나타내었고, 녹차와 숯의 배합비율이 증가할수록 휨 강도성능의 감소가 확인되었다. 바인더로 사용된 요소수지의 종류에 따른 차이는 $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 휨 강도성능을 나타냈지만, 양 수지간의 차이는 선행연구의 녹차-목재섬유 복합보드에 비해 현저히 감소하였다. 복합보드의 박리강도는 백탄 $$\geq_-$$ 활성탄 > 흑탄함유 복합보드의 순이었고, 백탄함유 복합보드에서는 목재섬유로만 구성된 대조보드와 거의 비슷한 값을 나타내는 것이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.427-435
• /
• 2022

For effective applicability of reinforced cork, cork composites reinforced with metal, glass fiber, and carbon fiber were developed, and the effects of the reinforcing materials on the mechanical properties of cork composites were investigated. The bending moduli of elasticity (MOE) of cork composites were in the 32.7-35.9 MPa range, while the bending strength values were in the 1.62-1.73 MPa range. The strength performance decreased in the order cork-metal > cork-carbon fiber > cork-glass fiber. The bending MOEs were improved by 29%-41% compared with simple cork boards, while the bending strengths of reinforced cork were 35%-45% higher. The strength performance significantly improved following the incorporation of thin mesh materials into the middle layer of the studied cork composites. The bending strains of the cork composites were remarkably higher compared with oak wood, making them promising for applications that require bending processing, such as curved jointing. The internal bond strengths of the cork composites were 0.26-0.44 MPa, approximately 0.36-0.60 times lower compared with medium-density fiber boards.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.861-867
• /
• 2015

유리섬유 보강적층재의 파괴인성을 평가하기 위하여 Compact tension (CT)형 시험을 실시하였다. 보강재는 직물형 유리섬유와 시트형 유리섬유강화플라스틱을 사용하였으며, 보강적층재는 층재사이에 보강재를 삽입 적층하였다. ASTM D5045에 의거하여 CT형 시험편을 제작하였다. 시험편의 길이는 끝면거리를 고려하여 선정하였으며, 인위적인 노치 끝에 볼트구멍(12 mm, 16 mm, 20 mm)을 선공하였다. 시트형 유리섬유강화플라스틱 보강적층재의 파괴인성하중은 보강하지 않은 적층재보다 최대 33% 증가하였으며, 직물형 유리섬유 보강적층재는 최대 152% 증가하였다. 이중외팔보(Double Cantilever Beam)이론에 의한 응력확대계수는 시트형 유리섬유강화플라스틱 보강적층재의 경우 1.08~1.38이었으며, 직물형 유리섬유 보강적층재는 1.38~1.86이었다. 이는 직물형 유리섬유 보강적층재의 경우 유리섬유와 층재의 섬유배열방향이 직교하여 파괴하중으로 인한 목재의 할렬진행을 억제시켰기 때문이다.

• 한국가구학회지
• /
• 제19권2호
• /
• pp.111-115
• /
• 2008

An experiment was conducted to know ultra-pure distilled water penetration depth through large vessel, small vessel, latewood fiber and earlywood fiber in longitudinal direction of Castanea crenata. In heartwood, latewood fiber transported water more than large and small vessel. While in sapwood, small vessel conduction depth was found the highest. Penetration depth of water after 15.0 seconds, no significant difference was observed among earlywood fiber, latewood fiber and earlywood vessel. Whilst in heartwood, no statistical difference was observed among earlywood fiber, latewood fiber and earlywood vessel. At the beginning, the speed of water penetration was high and then gradually decreased.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.86-91
• /
• 1998

The drainage was used to determine the specific filtration resistance for wood and non-wood fibers. The drainage rate is also affected by factors that can be changed on consistency, pressure drop across the mat, basis weight, additives, and viscosity. Recent development of theoretical studies in flow through porous media and filtration operation emphasize the urgent need for more accurate data for porosity and specific filtration resistance. This study was investigated to determine specific filtration resistance of Hw, Sw-BKP and Kenaf fiber by filtration experimental. Freeness levels selected were 150,250,and $350m\ell$ CSF. The average specific filtration resistance decreased as freeness increased and resistance of Sw-BKP was greater than that of Hw-BKP. The filtrate and porosity increased and specific filtration resistance decreased as particle size of fiber increased.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.510-515
• /
• 2014

The anatomical and physical properties of tension wood (TW), opposite wood (OW) and lateral wood (LW) in the branches of Korean paulownia (Paulownia coreana) were compared. The diameter of TW vessels was larger than that of OW and LW vessels. The most distinctive feature of TW fibers was the presence of a gelatinous layer (G-fiber). The cell wall of TW fibers was nearly three times as thick as that of OW and LW. TW differed from OW and LW in density, X-ray diffraction pattern and shear and compressive strengths. The results obtained in this study showed clear differences in the anatomical and physical properties of TW, OW and LW of Paulownia coreana branch woods.