• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.9-17
• /
• 2020

Recently, RES (renewable energy source) projects have been spreading all over the world as an alternative to solve the shortage of energy and environmental problems caused by fossil fuel consumption. The Korean government also supported the policy and demonstration project to increase the proportion of renewable energy to 63.8[GW] until 2030, which is 20[%] of the total power generation. On the other hand, output loss of a PV array can occur when the surrounding high-rise buildings and trees shade a PV array. Therefore, this paper proposes an algorithm to improve the output loss of a PV array, which electrically changes a circuit configuration of PV modules by wiring and switching devices. Furthermore, this study modeled a PV system based on PSIM S/W, which was composed of a PV array, a circuit configuration device, and a grid-connected inverter. From the simulations results with the modeling and test device, the existing method showed no output when 50% of the shade occurs in PV modules. In contrast, the proposed method could produce the output because the voltage in the PV module could be restored to 246[V], and the operation efficiency of the PV system could be improved by the operation algorithm of the circuit configuration device.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.164-172
• /
• 2006

Background: The authors conducted a retrospective study to evaluate the mechanism of injury, the surgical techniques, the clinical features, the combined injuries, the treatment results, and the surgical complications in patients with atlantoaxial fracture/subluxations. Methods: The authors reviewed 71 cervical fracture/dislocations during a four-year period from September 2002 to August 2006. Among them, there were twenty one C1,2 fracture/subluxations. There were thirteen men (mean age : 43.5 years) and eight women (mean age : 50 years). Their follow-up period was at least 6 months, and the mean follow-up period was 9.6 months. Gardner-Wells tongs traction was used in all patients immediately on presentation. Surgical treatment was performed, depending on the pathologic conditions. Results: Of all 21 cases, 14 cases were injured in motor vehicle accidents, 5 were falls, and 2 were miscellaneous. There were four C1 fracture (5.6%), fourteen C2 fracture (66.7%), one C1 and 2 combined fracture (4.8%), and one C1-2 subluxation (4.8%). The C1 fractures in our series were classified as two Jefferson's fractures and two C1 lateral mass fracture. The C2 fractures were classified as one odontoid type I fracture, two odontoid type II fractures, five odontoid type III fractures, one hangman's fracture, and four C2 body tear-drop fractures. Atlantoaxial fractures were associated with six (28.6%) head injuries, four (19.0%) other spinal injuries, two (9.5%) chest injuries, and three (14.3%) spinal cord injuries. Surgical treatment was performed in nine cases, which included anterior odontoid screw fixation in two cases, transarticular screw fixation with iliac bone graft in one case, posterior fixation by using C2 pedicle screw and C3 lateral mass screw in three cases, lateral mass screw fixation C1-2 with iliac bone graft in one case, O(occipito)-C1-3-4 screw fixation in one case, posterior C2-3 wiring with allograft in one case, and halo vest in six cases. Conservative management was used in the rest of the patients in our trials. Bone fusion was complete in all cases. There were no operation-related complication, except one pin site infection in the case of halo vest. Conclusion: In this study, the choice of appropriate treatment according to the fracture types resulted in safe and effective management of unique atlantoaxial fracture/subluxations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5879-5884
• /
• 2013

With the rapid industrialization and economical development, the electricity demands of the industrial facilities and densely populated large cities are continuing to increase in Korea. The increase in the power consumption requires the extension of power facilities, but it is difficult to secure spaces for equipment installation in the limited space of urban areas. In addition, the 154 kV or 345 kV transmission systems in Korea has a short transmission distance, and are connected to one another in network structures that ensure the high reliability and stability of power supply. This structure reduces the impedance during the fault in power system, and increases the magnitude of in the short circuit fault current. The superconducting fault current limiter (SFCL) was devised to effectively address these existing problems. The SFCL is a new-concept eco-friendly protective device that ensures fast operation and recovery time for the fault current and does not need additional fault detection devices. Therefore, many studies are being conducted around the world. In this paper, based on the wiring method the initial fault current characteristics, current limiting characteristics, according to the incident angle and the change in inductance current limiting characteristics were analyzed in a multifaceted methods.

• Clinics in Shoulder and Elbow
• /
• v.9 no.1
• /
• pp.96-104
• /
• 2006

Purpose: To evaluate and compare the results of children with displaced supracondylar fractures of humerus treated with open reduction and pinning with closed reduction and pinning. Materials and Methods: From March 2002, we treated 17 patients with completely displaced supracondylar fractures under the age of 7 with a minimal follow up period of 6 months. 9 patients were treated with closed reduction and pinning and 8 patients were treated with open reduction and pinning. The clinical results were evaluated with Flynn's criteria. Time to bone union was also analyzed for these two set of patients. Results: The group treated with open reduction had 6 excellent and 2 good results for change in carrying angles, 5 excellent, 2 good and 1 fair results for motion loss evaluated by Flynn's criteria. The average time to bony union for this group was 5.8 weeks. The group treated with closed reduction had 6 excellent, 2 good, and 1 fair results for change in carrying angles and 7 excellent, 1 good and 1 fair results for motion loss. The average time to bony uinon for this group was 3.7 weeks. Conclusion: In treating completely displaced supracondylar fractures of humerus in children, the closed reduction method and open reduction method all showed good results. But the operation time, duration of hospital stay and time to union was somewhat shorter for the patients treated with closed redution and pinning.

• Journal of Chest Surgery
• /
• v.32 no.4
• /
• pp.373-378
• /
• 1999

Background: Minimally invasive technique for various cardiac surgeries has become widely accepted since it has been proven to have distinct advantages for the patients. We describe here the results of our experiences of minimal incision in cardiac surgery. Material and Method: From February 1997 to November 1998, we successfully performed 31 cases of minimally invasive cardiac surgery. Male and female ratio was 17:14, and the patients age ranged from 1 to 75 years. A left parasternal incision was used in 9 patients with single vessel coronary heart disease. A direct coronary bypass grafting was done under the condition of the beating heart without cardiopulmonary bypass support(MIDCAB). Among these, one was a case of a reoperation 1 week after the first operation due to a kinked mammary artery graft. A right parasternal incision was used in one case of a redo mitral valve replacement. Mini-sternotomy was used in the remaining 21 patients. The procedures were mitral valve replacement and tricuspid annuloplasty in 6 patients, mitral valve replacement 5, double valve replacement 2, aortic valve replacement 1, removal of left atrial myxoma 1, closure of atrial septal defect 2, repair of ventricular septal defect 2, and primary closure of r ght ventricular stab wound 1. The initial 5 cases underwent a T-shaped mini-sternotomy, however, we adopted an arrow-shaped ministernotomy in the remaining cases because it provided better exposure of the aortic root and stability of the sternum after a sternal wiring. Result: The operation time, the cardiopulmonary bypass time, the aorta cross-clamping time, the mechanical ventilation time, the amount of chest tube drainage until POD#1, the chest tube indwelling time, and the duration of intensive care unit staying were in an acceptable range. There were two surgical mortalities. One was due to a rupture of the aorta cannulation site after double valve replacement on POD#1 in the mini-sternotomy case, and the other was due to a sudden ventricular arrhythmia after MIDCAB on POD#2 in the parasternal incision case. Postoperative complications were observed in 2 cases in which a cerebral embolism developed on POD#2 after a mini-sternotomy in mitral valve replacement and wound hematoma developed after a right parasternal incision in a single coronary bypass grafting. Neither mortality nor complication was directly related to the incision technique itself. Conclusion: Minimally invasive surgery using parasternal or mini-sternotomy incision can be used in cardiac surgeries since it is as safe as the standard full sternotomy incisions.

• Korean Security Journal
• /
• no.30
• /
• pp.33-60
• /
• 2012

False alarm of Electronic security causes various serious side effects such as decrease of electronic security guard's morale caused by unnecessary mobilization, increase of fatigue caused by workload increase, increase of electronic security company owner's management burden and decrease of electronic security service utilization rate caused by customer's distrust. Therefore, the study considered the Korean regulation related with false alarm of electronic security and proposed actual status of false alarm and measure for it. The study proposed systematic resolution assignments and political assignments in relation with the measure for false alarm. Systematic resolution assignments are as follows. First, electronic security company should construct electronic security system accurately from the initial step of security consulting and security planning related with target facility. Second, it is necessary to encourage installation and operation of video monitoring system. Third, sensor wiring should be separated. Fourth, the measures for false alarm depending on main system causes should be prepared. It is necessary to encourage the installation of 'arming disarming alarm sound' generator. In addition, the measures for false arm depending on the characteristics of sensor should be prepared and standardized. Fifth, system maintenance should be reinforced. Political assignments related with the measures for false alarm are as follows. First, it is necessary to reinforce education & training. Individual nurturing & education process should be run by electronic security company or the education focusing on the measure for false alarm should be performed in job training defined in "Security Industry Act". Second, it is necessary to establish and reinforce legal regulation and establish device. If police authority standardizes the documents related with false alarm, provides their forms and requires them for periodical reports or documents, it is expected that good measures for false alarm will be prepared on the basis of actual data in the future. Third, cooperation organization to discuss the measures for false alarm like 'Conference for False Alarm of Electronic Security' should be organized and operated. Fourth, interest and role of electronic security company and electronic security supervisor should be enlarged.