• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.989-996
• /
• 2008

Recently, a few types of fish-cage in open sea are researched. This fish-cage has to operate monitoring system for keeping an optimum living condition for fish. The most efficient monitoring system is WVMS(Wireless Vision Monitoring System) for fish-cage in open sea. WVMS should be able to transmit video signal and communicate with each controller. So. it needs to be based on WLAN(Wireless LAN) which has characteristic of higher transfer-rate, In this paper, we propose a structure of WVMS using WLAN equipments for maritime environment and prove its effectiveness. We present the propagation loss model of WVMS's communication channel. measured by field test, and discuss its validity compared with the predictive value based on the Friss propagation model and Plane earth reflection model. We present the number of frames that is received from WLAN modem connecting with underwater-camera in field test spots. As a result, we confirmed that proposed WVMS is suitable for maritime environment and it is possible to be applied to fish-cage in open sea on 'seogwipo'.

• Journal of Biosystems Engineering
• /
• 제32권3호
• /
• pp.173-178
• /
• 2007

This research was conducted to develop and analyze a wireless monitoring system for judging if sick or dead layers (SDL) exist in multi-tier layers battery (MLB) by machine vision, and to evaluate the performance between a wired monitoring system and it. This study used the AP (Access Point), the RS-285 to RS-232 converter, RS-232 to Ethernet converter, PICBASIC board and upgraded lump image processing method to change wired monitoring system into wireless monitoring system. The system was tested at a pilot farm and farm layer house. Results showed that monitoring judgement success rate at a pilot farm on normal cage (without SDL) was 82.3% and that on abnormal cage (with SDL) was 87.5%, respectively. And communication performance test results showed at farm layer house was $700{\sim}900$ kbps while equipments operated. There were dropped slightly than performance of wired monitoring system, however, the quantity was too small to make a significant difference of performance of the controling system developed for wireless communication.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.900-904
• /
• 2009

The measurement of contact wire uplift in electric railway is one of the most test method to accept the maximum permitted speed of new vehicles or pantographs. The contact wire uplift can be measured for shot periods when pantograph is running in monitoring station. This paper describes the development of two different methods for contact uplift measurement using vision-based system and wireless online monitoring system. Our vision-based system employs a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera with gigabit ethernet LAN. The development of a real-time remote monitoring system that acquires data from any kind of sensor to be transmitted by wireless communication from overhead line and structure at 25 kV to a computer in catenary system. The proposed two kind of different measurement systems to evaluation for dynamic uplift of overhead contact wire shows promising on-field applications for high speed train such as Korea Tilting Train (TTX) and Korea Train eXpress (KTX).

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• Structural Monitoring and Maintenance
• /
• 제3권1호
• /
• pp.91-114
• /
• 2016

In this paper, recent research trends and activities on structural health monitoring (SHM) of civil infrastructure in Korea are reviewed. Recently, there has been increasing need for adopting smart sensing technologies to SHM, so this review focuses on smart sensing, monitoring, and assessment for civil infrastructure. Firstly, the research activities on smart sensor technology is reviewed including optical fiber sensors, piezoelectric sensors, wireless smart sensors, and vision-based sensing system. Then, a brief overview is given to the recent advances in smart monitoring and assessment techniques such as vibration-based global monitoring techniques, local monitoring with piezoelectric materials, decentralized monitoring techniques for wireless sensors, wireless power supply and energy harvest. Finally, recent joint SHM activities on several test beds in Korea are discussed to share the up-to-date information and to promote the smart sensors and monitoring technologies for applications to civil infrastructure. It includes a Korea-US joint research on test bridges of the Korea Expressway Corporation (KEC), a Korea-US-Japan joint research on Jindo cable-stayed bridge, and a comparative study for cable tension measurement techniques on Hwamyung cable-stayed bridge, and a campaign test for displacement measurement techniques on Sorok suspension bridge.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.511-516
• /
• 2003

컴퓨터 시각 기술은 다양한 농작업 생력화에 있어 핵심적인 역할을 해왔다. 비록 컴퓨터 시각 기술이 광범위한 분야에 성공적으로 적용되고 있다고는 하지만 인간의 시각을 통한 인지 능력에 비하면 현재의 컴퓨터 시각 기술은 여전히 매우 미흡한 수준에 있다고 하겠다. 특히, 작업환경이 비구조적이고 가변적인 농작업 환경 하에서의 작업의 생력화는 이러한 기술적 문제를 극복하는 것이 작업의 성패를 좌우하게 된다. 본 논문에서는 원격작업 개념을 도입하여 작업자와 작업기계간의 호환적인 인터페이스를 구축하고 컴퓨터와 인간의 혼합형 의사결정 시스템을 구현하여 기존의 컴퓨터 시각 기술이 갖는 인지 처리 능력의 한계를 극복하는 시스템을 제안하였다. 시설재배에 요구되는 전정, 관수, 방제, 제초, 수확, 운반 등과 같은 다양한 작업들은 작업 대상체에 대한 인식을 바탕으로 수행된다. 특히 가변적인 자연 조명 환경 하에서 수박과 줄기 그리고 잎이 혼재되어 있는 재배현장의 영상으로부터 수박을 추출하여 그 위치 좌표를 산출하는 작업은 기술적으로 매우 어려운 작업이며 수박이 잎과 줄기로 덮혀 있는 경우 더욱 어려워진다. 제안한 개념을 구현하기 위하여 무선으로 수신되는 재배 현장의 수박 영상으로부터 수박을 인식하도록 하였다. 개발한 시스템은 작업자(농민), 컴퓨터 그리고 자동화 작업설비가 상대적으로 수월성을 갖는 기능을 중심으로 역할을 분담하도록 구축하였다 개발 시스템은 크게 무선원격 모니터링 및 작업제어 모듈, 무선원격 영상 획득 및 데이터 송수신 모듈, 작업자와 컴퓨터간의 인터페이스 모듈로 구성하였다 작업자는 RF 송수신 모듈을 통하여 무선으로 획득되어 터치 스크린에 보여지는 영상을 통하여 작업 지시를 하게 되고 이 작업 지시로부터 컴퓨터는 국부 영상처리 시퀀스를 통하여 수박을 추출하고 위치를 산출하게 된다. 개발한 인터페이스 시스템은 가변적이고 복잡한 작업 환경하에서 작업 대상체의 정보를 실시간으로 성공적으로 추출하였다. 제안한 원격작업 인터페이스 시스템은 다양한 생물생산 작업의 생력화를 촉진하는 중심적 역할을 할 것으로 기대된다.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.73-81
• /
• 2003

An autonomous stair robot recognizing the stair, and climbing up and down the stair by utilizing a robot vision, photo sensors, and appropriate climbing algorithm is introduced. Four arms associated with four wheels make the robot climb up and down more safely and faster than a simple track typed robot. The robot can adjust wheel base according to the stair width, hence it can adopt to a variable width stair with different algorithms in climbing up and down. The command and image data acquired from the robot are transferred to the main computer through RF wireless modules, and the data are delivered to a remote computer via a network communication through a proper data compression, thus, the real time image monitoring is implemented effectively.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.