• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.255-261
• /
• 2004

This paper presents an improved droop method which minimizes the voltage droop of a parallel-connected power supply Conventionally, the droop method has been used to achieve a simple structure and no-interconnections among power sources. However, it has a trade-off between output voltage regulation and load sharing accuracy In this paper, the droop is minimized with a current and droop gain control using steady-stage estimation. The proposed method can achieve both good voltage regulation and good load sharing. A design example of two 10㎸, 100㎃ parallel modules is made and tested to verify the proposed current-sharing method.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.911-921
• /
• 2016

This paper presents the description, practical implementation, and stability analysis of a recently proposed, energy-efficient, medium access control protocol for wireless sensor networks, ALOHA-Q, which employs a reinforcement-learning framework as an intelligent transmission strategy. The channel performance is evaluated through a simulation and experiments conducted using a real-world test-bed. The stability of the system against possible changes in the environment and changing channel conditions is studied with a discussion on the resilience level of the system. A Markov model is derived to represent the system behavior and estimate the time in which the system loses its operation. A novel scheme is also proposed to protect the lifetime of the system when the environment and channel conditions do not sufficiently maintain the system operation.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.32-37
• /
• 2019

In this paper, we have designed a solar photovoltaic system to attach solar photovoltaic modules to each module and develop the best efficiency in each module. The efficiency of the designed solar panel optimizer was more than 99.27% and MPPT efficiency of 99.66%. In addition, the monitoring of power generation and abnormal operation phenomenon in each optimum period and tracking for failure location of specific photovoltaic module have improved the utilization rate of photovoltaic power generation. Wired and wireless communication methods has been proposed to monitor the power generation and operation status of the solar panel optimizer. For this purpose, the RS485 communication was used for wire communication and Zigbee communication was used for wireless communication to monitor the status of each module in real time. It is shown that communication redundancy can be achieved through the proposed method, and the possibility of commercialization is suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.129-135
• /
• 2019

This paper is part of research and development for stand-alone solar system without commercial power supply. It implements firmware of controller for operation of stand-alone solar system by applying IoT technology and also develops communication modules that allow multiple solar lamps to send and receive data through wireless network. The controller of the developed stand-alone solar system can effectively charge the power generated by the solar module, taking into account the battery's charge and discharge characteristics. It also has the advantage of attaching wireless communication modules to solar lamp posts to establish wireless communication networks without incurring communication costs. In addition, by establishing IoT gateway middleware platform for each installation site, it forms a foundation to operate multiple solar lamp posts into multiple clusters. And, it is expected that the data collected in each cluster will be used to enable configuration and control of operational information, thereby inducing convenience and efficiency of remote operation and management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.202-211
• /
• 2002

Because wireless links are subject to disturbances and failures, it is important to support disconnected operations in mobile computing. Many schemes have been proposed to support the efficient disconnected operations. In this paper, we analyze and measure the computation time including disconnected operations to evaluate the performance of mobile computing on error prone wireless links. Mobile computation consists of three states: data hoarding, disconnected operation, and block states. We estimate the computation time using various parameters; error rate and recovery rate of wireless link, hoarding overhead, logging overhead, and reintegration overhead, etc. We can choose efficient strategies for disconnected operations and predict the performance using the results of this analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.757-763
• /
• 2006

In this paper, a novel multiple access scheme using SMA(Split and Merge Algorithm) is proposed to reduce the accessdelay of wireless MAC protocols. The key idea of the SMA is to dynamically split and merge the contending terminals depending on their traffic loads for effective control of access to the channels. The SMA divides the collided terminals into several sub-groups if a collision occurs and merges the idle terminals of the split sub-groups into their original group. The merge algorithm can be used to resolve collision and split operation can be used to dynamic group management. The simulation results indicate that our algorithm may provide a higher throughput and a lower collision rate than the existing algorithms, especially under heavy traffic loads.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.581-583
• /
• 2012

In this paper, linux-based wireless terminals that receives packets from the AP(Access Point) were analyzed. Wireless terminals received a number of unnecessary packets from AP, and received unnecessary packets were discarded in the appropriate layer. Whenever Wireless terminals receive unnecessary packets from AP, wireless terminals repeatedly perform an inefficient operation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.209-217
• /
• 2012

In the present, Wireless Sensor Network(WSN) has been used for the purpose of the military operation with surveillance systems and for collecting useful information from the natural environment. Basically, low-power, easy deployment and low cost are the most important factors to be deployed for WSNs. Lots of researches have been studied to meet those requirements, especially on the node capacity and battery lifetime improvements. Recently, the study of wireless mesh networks applied into the surveillance systems has been proceeded as a solution of easy deployment. In this paper, we proposed large-scale intelligent multi-layer surveillance systems based on QoS assuring Wireless Mesh Networks and implemented them in the real testbed environment. The proposed system explains functions and operations for each subsystem as well as S/W and H/W architectures. Experimental results are shown for the implemented subsystems and the performance is satisfactory for the surveillance system. We can identify the possibility of the implemented multi-layer surveillance system to be used in practice.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.