• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.605-610
• /
• 2021

현재까지 알려진 무선충전 방식 중에서 장거리에서 가장 효율이 좋은 방식은 레이저를 이용한 방식이다. 여기에 레이저를 이용한 무선통신 기술을 결합한다면 다양한 분야에 활용이 가능할 것이다. 이에 본 논문에서는 레이저를 이용한 무선충전 및 무선통신의 동시전송 기술에 관하여 연구하고 이에 대한 실험 결과를 보인다. 이 기술은 광 무선충전을 위해서 송신부에 전/광 변환을 위한 레이저 광원을 사용하고 수신부에는 광/전 변환을 위한 태양전지를 사용한다. 또한, 광 무선통신을 위해 해당 레이저 광신호에 반송파를 이용하여 신호를 송신하는 방식이다. 본 논문에서는 실험을 통해 100 mW 레이저 송신부와 태양전지 수신부를 이용하여 광 무선충전은 1.9 %의 DC-to-DC 효율을 보였으며, 무선 광통신은 전송거리가 15 m일때 최대 90 kbps의 전송속도를 보였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.36-39
• /
• 2015

Many studies are being conducted to implement wireless charging, for example, for cellular phones or electronic tooth brushes, via wireless power transmission technique. However, the magnetic induction method had a very short transmission distance. To solve this problem, the team of Professor Marin Soljacic proposed a magnetic resonance system that used two resonance coils with the same resonance frequency. It had an approximately 40% efficiency at a 2m distance. The system improved the low efficiency and short distance problems of the existing systems. So it could also widen the application range of wireless power transmission. Many studies on the subject are underway. In this paper, the superconductor coil was used to improve the efficiency of magnetic resonance wireless power transmission. The resonance wireless power transmission system had a source coil, a load coil, and resonance coils (a transmitter and a receiver). The efficiency and distance depended on the characteristics of the transmitter and receiver coils that had the same resonance frequency. Therefore, two resonance coils were fabricated by superconductors. The current density of the superconductor was higher than that of the normal conductor coil. Accordingly, it had a high quality-factor and improved efficiency.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.1-10
• /
• 2023

본 논문에서는 기존 유선기반 CCTV 감시시스템과 IP 카메라 시스템에 국산 무선통신기술을 활용한 고화질 영상의 원거리 무선 전송 기술에 대해 설계 및 구현에 대해 성능 평가을 하였다. 무선 다중 IP 카메라 전송 단말장치및 무선통신 RF 모듈간 연동시험과 무선 다중 IP 카메라 기반 영상전송시스템 통합 연동시험으로 영상 전송 시 모듈 연동 적합성을 확인한다.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1025-1032
• /
• 2022

본 논문에서는 기존 유선기반 CCTV 감시시스템과 IP 카메라 시스템에서 발생되는 구축비용에 대한 부담을 절감하고자 무선 통신기술을 활용한 TDMA기반 PoE 무선 다중 IP 카메라 전송시스템 개발이며, 국산 무선통신기술을 활용한 고화질 영상의 원거리 무선 전송 기술에 대해 설계 및 구현 하고자 한다. 제안 관련 기술에 대한 선 IP 전송 시스템의 송수신 프로토타입과 무선 다중 IP 카메라 전송 단말장치 및 영상 수집 장치(SB-200)에 대해 기술하였다.

• Journal of Information Technology Applications and Management
• /
• 제23권2호
• /
• pp.61-80
• /
• 2016

The wireless mesh network (WMN) is a next-generation technology for data networking that has the advantage in cost and the flexibility in its construction because of not requiring the infra-structure such as the ethernet. This paper focuses on the optimal link scheduling problem under the wireless mesh network to effectuate real-time streaming by using the constraint programming. In particular, Under the limitation of half-duplex transmission in wireless nodes, this paper proposes a solution method to minimize the makespan in scheduling packet transmission from wireless nodes to the gateway in a WMN with no packet transmission conflicts due to the half-duplex transmission. It discusses the conflicts in packet transmission and deduces the condition of feasible schedules, which defines the model for the constraint programming. Finally it comparatively shows and discusses the results using two constraint programming solvers, Gecode and the IBM ILOG CP solver.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.119-125
• /
• 2008

This paper examines the use of a wireless Fieldbus based on IEEE 802.15.4 MAC protocol. The superframe of IEEE 802.15.4 is applied to a transmission scheme of real-time mixed data. The transmission and bandwidth allocation scheme are proposed for real-time communication using a superframe. The proposed wireless Fieldbus protocol is able to transmit three types of data (periodic data, sporadic data, and non real-time messages), and guarantee realtime transmission simultaneously within a limited timeframe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1047-1057
• /
• 2015

In this paper, we propose an effective wireless transmission technology, under poor wireless transmission channel surroundings caused by speedy flying, that are able to transmit high quality video recording information and surveillance data via accessing to various wireless networking services architecture such as One-on-One, Many-on-One, One-on-Many, Over the Horizon. The Real-Time Position Analysis(RAPA) method is also suggested to provide more meaningful video information of shooting area. The suggested wireless transmission technology and RAPA can make remote control of UAV's flight route to get valuable topography information. Because of the benefit to get both of video information and GPS data of shooting area simultaneously, the result of study can be applied to various application sphere including UAV that requires high speed wireless transmission.