• ETRI Journal
• /
• v.41 no.6
• /
• pp.739-749
• /
• 2019

Security and accuracy are two issues in the localization of wireless sensor networks (WSNs) that are difficult to balance in hostile indoor environments. Massive numbers of malicious positioning requests may cause the functional failure of an entire WSN. To eliminate the misjudgments caused by malicious nodes, we propose a compressive-sensing-based multiregional secure localization (CSMR_SL) algorithm to reduce the impact of malicious users on secure positioning by considering the resource-constrained nature of WSNs. In CSMR_SL, a multiregion offline mechanism is introduced to identify malicious nodes and a preprocessing procedure is adopted to weight and balance the contributions of anchor nodes. Simulation results show that CSMR_SL may significantly improve robustness against attacks and reduce the influence of indoor environments while maintaining sufficient accuracy levels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.184-191
• /
• 2008

NanoQplus, which is an embedded operating system for wireless sensor networks (WSNs) and developed by Electronics and Telecommunications Research Institute (ETRI), provides programmer-friendly preemptive multi-threading programming technique, but it has poor network protocol stack, as compared to TinyOS, one of the famous operating systems for WSNs. In this paper, we apply dynamic MANET on-demand routing (DYMO) protocol, which is being standardized in Internet Engineering Task Force (IETF), to NanoQplus. Since DYMO has been proposed for mobile ad-hoc networks (MANETs) and MANETs have less resource restrictions than WSNs, the basic DYMO protocol cannot be applied to WSNs without modifications. Moreover, coherence with MAC protocol should be considered in order to eliminate redundant data between MAC and network layers. Thus, we propose a modified version of the basic DYMO protocol for NanoQplus. The experimental results from a real sensor network test-bed show that the DYMO implementation using NanoQplus works efficiently in WSNs.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.231-241
• /
• 2013

Improvements in wireless sensor network (WSN) technology have resulted in a large number of applications. WSNs have been mainly used for monitoring applications, but they are also applicable to target tracking, health care, and monitoring with multimedia data. Nodes are generally deployed in environments where the exhausted batteries of sensor nodes are difficult to charge or replace. The primary goal of communication protocols in WSNs is to maximize energy efficiency in order to prolong network lifetime. In this paper, various medium access control (MAC) protocols for synchronous/asynchronous and single/multi-channel WSNs are investigated. Single-channel MAC protocols are categorized into synchronous and asynchronous approaches, and the advantages and disadvantages of each protocol are presented. The different features required in multi-channel WSNs compared to single-channel WSNs are also investigated, and surveys on multi-channel MAC protocols proposed for WSNs are provided. Then, existing broadcast schemes in such MAC protocols and efficient multi-hop broadcast protocols proposed for WSNs are provided. The limitations and challenges in many communication protocols according to this survey are pointed out, which will help future researches on the design of communication protocols for WSNs.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.38-50
• /
• 2011

For energy-efficiency in Wireless Sensor Networks (WSNs), when a sensor node detects events, the sensing period for collecting the detailed information is likely to be short. The lifetime of WSNs decreases because communication modules are used excessively on a specific sensor node. To solve this problem, the TARP decentralized network packets to neighbor nodes. It considered the average data transmission rate as well as the data distribution. However, since the existing scheme did not consider the energy consumption of a node in WSNs, its network lifetime is reduced. The proposed scheme considers the remaining amount of energy and the transmission rate on a single node in fitness evaluation. Since the proposed scheme performs an efficient congestion control it extends the network lifetime. The simulation result shows that our scheme enhances the data fairness and improves the network lifetime by about 27% on average over the existing scheme.

• Journal of Internet Computing and Services
• /
• v.15 no.5
• /
• pp.1-7
• /
• 2014

WireWireless sensor networks(WSNs) are generally comprised of densely deployed sensor nodes, which causes highly redundant sensor data transmission and energy waste. Many studies have focused on energy saving in WSNs. However, delay problem also should be taken into consideration for mission-critical applications. In this paper, we propose a BISA (Bio-Inspired Scheduling Algorithm) to reduce the energy consumption and delay for WSNs inspired by biological systems. BISA investigates energy-efficient routing path and minimizes the energy consumption and delay using multi-channel for data transmission. Through simulations, we observe that the BISA archives energy efficiency and delay guarantees.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.223-227
• /
• 2010

In this paper, we present a QoS-aware MAC protocol (QA-MAC) for cluster based wireless sensor networks (WSNs). QA-MAC is a TDMA-based scheduling protocol that minimizes the energy consumption in multi-hop WSNs and provides Quality of Service (QoS). A dynamic scheduling algorithm according to the number of member nodes, node traffics, and traffic priorities is suggested. The selected cluster head allocates time slots for all member nodes in the first TDMA schedule period of each round. During the second schedule period in each round, the cluster head makes a schedule for all data transmission. The proposed QA-MAC (QoS-Aware MAC) could save energy, reduce transmission delay, and support QoS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.593-594
• /
• 2015

In wireless sensor networks (WSNs), due to the very low data rate, the sleeping schedule is usually used to save consumed energy and prolong the lifetime of nodes. However, duty-cycled approach can cause a high end-to-end (E2E) delay. In this paper, we study a node scheduling algorithm in WSNs such that E2E delay meets bounded delay with a given probability. We have applied the probability theory to spot the relationship between E2E delay and node interval. Simulation result illustrates that we can create the network to achieve given delay with prior probability and high energy use efficient as well.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.51-53
• /
• 2009

In wireless sensor networks(WSNs), geographic routing algorithms can enhance the network capacity. However, in the real WSNs, it is difficult for each node to know its accurate physical location. Geographic routing with location error may have serious problems such as disconnected links and delayed data transmission. In this letter, we present an efficient location error detection scheme for geographic routing. The proposed algorithm can efficiently update its incorrect location without additional procedure and finally enhance the performance on the geographic routing with the location errors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1098-1099
• /
• 2007

In this paper, we propose a public key based security architecture for Wireless Sensor Networks (WSNs). The basic architecture comprises of two schemes; a key handshaking scheme based on simple linear operations for fast computation and an identity based cryptosystem which does not require any certificate authority. Our analysis shows that, the combined scheme ensures a good level of security and is very much suitable for the energy constrained trend of wireless sensor network.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.377-384
• /
• 2023

The existence of abnormal breakpoint data leads to poor channel balance in wireless sensor networks (WSN). To enhance the communication quality of WSNs, a method for positioning abnormal breakpoint data in WSNs on the basis of signal reconstruction is studied. The WSN signal is collected using compressed sensing theory; the common part of the associated data set is mined by exchanging common information among the cluster head nodes, and the independent parts are updated within each cluster head node. To solve the non-convergence problem in the distributed computing, the approximate term is introduced into the optimization objective function to make the sub-optimization problem strictly convex. And the decompressed sensing signal reconstruction problem is addressed by the alternating direction multiplier method to realize the distributed signal reconstruction of WSNs. Based on the reconstructed WSN signal, the abnormal breakpoint data is located according to the characteristic information of the cross-power spectrum. The proposed method can accurately acquire and reconstruct the signal, reduce the bit error rate during signal transmission, and enhance the communication quality of the experimental object.