• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.25-33
• /
• 2021

Energy-harvesting wireless sensor networks(EH-WSNs) can collect energy from the environment and overcome the technical limitations of existing power. Since the transmission distance in a wireless sensor network is limited, the data are delivered to the destination node through multi-hop routing. In EH-WSNs, the routing protocol should consider the power situations of nodes, which is determined by the remaining power and energy-harvesting rate. In addition, in applications such as environmental monitoring, when there are urgent data, the routing protocol should be able to transmit it stably and quickly. This paper proposes an adaptive routing protocol that satisfies different requirements of normal and urgent data. To extend network lifetime, the proposed routing protocol reduces power imbalance for normal data and also minimizes transmission latency by controlling the transmission power for urgent data. Simulation results show that the proposed adaptive routing can improve network lifetime by mitigating the power imbalance and greatly reduce the transmission delay of urgent data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권6호
• /
• pp.1357-1378
• /
• 2013

Energy constraint of wireless sensor networks makes energy saving and prolonging the network lifetime become the most important goals of routing protocols. In this paper, we propose an Energy Efficient Chain-based Routing Protocol (EECRP) for wireless sensor networks to minimize energy consumption and transmission delay. EECRP organizes sensor nodes into a set of horizontal chains and a vertical chain. Chain heads are elected based on the residual energy of nodes and distance from the header of upper level. In each horizontal chain, sensor nodes transmit their data to their own chain head based on chain routing mechanism. EECRP also adopts a chain-based data transmission mechanism for sending data packets from the chain heads to the base station. The simulation results show that EECRP outperforms LEACH, PEGASIS and ECCP in terms of network lifetime, energy consumption, number of data messages received at the base station, transmission delay and especially energy${\times}$delay metric.

• 스마트미디어저널
• /
• 제4권1호
• /
• pp.25-32
• /
• 2015

Powering wireless sensors with energy harvested from the environment is coming of age due to the increasing power densities of both storage and harvesting devices and the electronics performing energy efficient energy conversion. In order to maximize the functionality of the wireless sensor network, minimize missing packets, minimize latency and prevent the waste of energy, problems like congestion and inefficient energy usage must be addressed. Many sleep-awake protocols and efficient message priority techniques have been developed to properly manage the energy of the nodes and to minimize congestion. For a WSN that is operating in a strictly energy constrained environment, an energy-efficient transmission strategy is necessary. In this paper, we present a novel transmission priority decision scheme for a heterogeneous body sensor network composed of normal nodes and an energy harvesting node that acts as a cluster head. The energy harvesting node's decision whether or not to clear a normal node for sending is based on a set of metrics which includes the energy harvesting node's remaining energy, the total harvested energy, the type of message in a normal node's queue and finally, the implementation context of the wireless sensor network.

• 인터넷정보학회논문지
• /
• 제10권3호
• /
• pp.85-94
• /
• 2009

본 논문에서는 무선 센서 네트워크에서의 에너지 효율적인 전송방안을 제안하고 이에 대한 이론적 분석을 제시하고자 한다. 본 논문에서 제안하는 전송기법은 채널 상태가 상대적으로 좋을 때만 전송을 시도하는 opportunistic transmission에 기반한 이진 결정 (binary-decision) 기반 전송이다. 이진 결정 기반 전송에서는 Markov decision process (MDP)를 이용하여 성공적인 전송을 위한 최적의 채널 임계값을 도출하였다. 다양한 시뮬레이션을 통해 제안하는 전송기법의 성능을 에너지 효율성과 전송율 측면에서 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.3823-3840
• /
• 2017

This paper analyzes the nodes deployment optimization problem in energy constrained wireless sensor networks, which multi-hop cooperative beamforming (CB) based cooperative-multi-input-single-output (CMISO) transmission is adopted to reduce the energy consumption. Firstly, we establish the energy consumption models for multi-hop SISO, multi-hop DSTBC based CMISO, multi-hop CB based CMISO transmissions under random nodes deployment. Then, we minimize the energy consumption by searching the optimal nodes deployment for the three transmissions. Furthermore, numerical results present the optimal nodes deployment parameters for the three transmissions. Energy consumption of the three transmissions are compared under optimal nodes deployment, which shows that CB based CMISO transmission consumes less energy than SISO and DSTBC based CMISO transmissions. Meanwhile, under optimal nodes deployment, the superiorities of CB based CMISO transmission over SISO and DSTBC based CMISO transmissions can be more obvious when path-loss-factor becomes low.

• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1657-1666
• /
• 2010

수중 센서 네트워크(UWSN: Underwater Wireless Sensor Networks)는 수중 센서 노드들의 에너지 자원의 제약이 심하고, 제한된 통신 대역폭과 다양한 전파지연 등의 환경적인 특성 때문에 효율적이고 안정적인 데이터전송 방법이 요구된다. 본 논문에서는 수중 센서 네트워크의 센서 노드들이 해양 바닥에 고정된 2차원 구조(2D: two-dimensional underwater wireless sensor network model)에서 이상적인 셀 크기의 육각 모자이크 구조를 이용한 향상된 하이브리드 전송 방법을 설명하고, 또한 센서 노드를 해양 바닥의 닻에 매달아 움직임이 가능한 3차원 구조(3D: three-dimensional underwater wireless sensor network model)에서 효과적인 데이터전송을 위한 에너지 효율적인 인식 및 통신범위를 확장하는 방법을 제안한다. 2D 및 3D 구조에서 제안된 방법들은 시뮬레이션 결과에 의해 기존의 전송 방법보다 높은 에너지 효율성을 가지는 것이 확인되었다.

• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.1-9
• /
• 2019

In this paper, we propose the algorithms which determine 1) the efficient anchor-node visiting route of mobile sink in terms of energy supply and 2) the efficient energy amount to be charged to each anchor node, by using the information of each anchor node and the mobile sink. Wireless sensor networks (WSNs) using mobile sinks can be deployed in more challenging environments such as those that are isolated or dangerous, and can also achieve a balanced energy consumption among sensors which leads to prolong the network lifetime. Most mobile sinks visit only some anchor nodes which store the data collected by the nearby sensor nodes because of their limited energy. The problem of these schemes is that the lifetime of the anchor nodes can be shorten due to the increased energy consumption, which rapidly reduces the overall lifetime of WSN. This study utilizes a mobile sink capable of wireless power transmission to solve this problem, so a mobile sink can gather data from anchor nodes while charging energy to them. Through the performance verification, it is confirmed that the number of blackout nodes and the amount of collected data are greatly improved regardless of the size of the network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권3호
• /
• pp.523-541
• /
• 2011

In current IEEE 802.11 wireless LAN, every unicast transmission requires an ACK from the receiver for reliability, though it consumes energy and bandwidth. There have been studies to remove or reduce ACK overhead, especially for energy efficiency. However none of them are practically used now. This paper introduces a noble method of selective unacknowledged transmission, where skipping an ACK is dynamically decided frame by frame. Utilizing the fact that a multicast frame is transmitted without accompanying an ACK in 802.11, the basic unacknowledged transmission is achieved simply by transforming the destination address of a frame to a multicast address. Since removing ACK is inherently more efficient but less strict, its practical profit is dependent on traffic characteristics of a frame as well as network error conditions. To figure out the selective conditions, energy and performance implications of unacknowledged transmission have been explored. Extensive experiments show that energy consumption is almost always reduced, but performance may be dropped especially when TCP exchanges long data with a long distance node through a poor wireless link. An experiment with a well-known traffic model shows that selective unacknowledged transmission gives energy saving with comparable performance.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.108-112
• /
• 2021

For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.