• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.300-308
• /
• 2018

An online estimation method for wireless power transfer (WPT) systems is presented without using any measurement of the secondary side or the load. This parameter estimation method can be applied with a controlling strategy that removes both the receiving terminal controller and the wireless communication. This improves the reliability of the system while reducing its costs and size. In a wireless power transfer system with an LCCL impedance matching circuit under a rectifier load, the actual load value, voltage/current and mutual inductance can be reflected through reflected impedance measuring at the primary side. The proposed method can calculate the phase angle tangent value of the secondary loop circuit impedance via the reflected impedance, which is unrelated to the mutual inductance. Then the load value can be determined based on the relationships between the load value and the secondary loop impedance. After that, the mutual inductance and transfer efficiency can be computed. According to the primary side voltage and current, the load voltage and current can also be detected in real-time. Experiments have verified that high estimation accuracy can be achieved with the proposed method. A single-controller based on the proposed parameter estimation method is established to achieve constant current control over a WPT system.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.161-165
• /
• 2011

In this paper, a high-efficiency DC-AC converter is used for wireless energy transmission. The DC-AC convertter is implemented by combining the oscillator and power amplifier. Given that the conversion efficiency of a DC-AC converter is strongly affected by the efficiency of the power amplifier, a high-efficiency power amplifier is implemented using a class-E amplifier structure. Also, because of the low output power of the oscillator connected to the input stage of the power amplifier, a high-gain two-stage power amplifier using a drive amplifier is used to realize a high-output power DC-AC converter. The high-efficiency DC-AC converter is realized by connecting the oscillator to the input stage of the high-gain high-efficiency two-stage class-E power amplifier. The output power and the conversion efficiency of the DC-AC converter are 40.83 dBm and 87.32 %, respectively, at an operation frequency of 13.56 MHz.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.240-242
• /
• 2021

최근 대부분의 매장에서 직원과 고객이 직접 대면하여 주문 하는 시스템이 사라지고 무선 주문 시스템인 키오스크가 도입되고 있다. 하지만 매장에서 서비스하고 있는 Drive-Thru는 아직까지 직원과 고객이 직접 소통을 하여 주문 하는 시스템을 가지고 있다. 본 논문에서는 Drive-Thru의 직원과 고객이 직접 소통하는 부분을 QR-Code를 이용하여 고객이 직원과 대면하지 않고 주문을 하는 Drive-Thru 시스템의 설계를 제안한다. 비대면 Drive-Thru 시스템은 매장 내의 직원을 최소화하여 더욱 자동화 된 시스템 제공을 목적으로 한다. 이에 따라 고객들은 더욱 정확한 서비스를 제공 받으며 소비의 질을 높일 수 있는 효과를 지닌다.

• Smart Structures and Systems
• /
• 제10권3호
• /
• pp.299-312
• /
• 2012

The authors' research efforts recently led to the development of a customized wireless control unit which receives the real-time feedbacks from the sensors, and elaborates the consequent control signal to drive the actuator(s). The controller is wireless in performing the data transmission task, i.e., it receives the signals from the sensors without the need of installing any analogue cable connection between them, but it is powered by wire. The actuator also needs to be powered by wire. In this framework, the design of a power management unit is of interest only for the wireless sensor stations, and it should be adaptable to different kind of sensor requirements in terms of voltage and power consumption. In the present paper, the power management efficiency is optimized by taking into consideration three different kinds of accelerometers, a load cell, and a non-contact laser displacement sensor. The required voltages are assumed to be provided by a power harvesting solution where the energy is stored into a capacitor.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.227-230
• /
• 2000

Chuas circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chuas circuits are proposed and synchronizations of a equivalent wire and wireless power line are investigated. Since the synchronization of the equivalent wire and wireless system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the equivalent wire and wireless transmission system caused by the line parameters L and C.

• 한국정보통신학회논문지
• /
• 제12권6호
• /
• pp.1082-1086
• /
• 2008

MIMO기술은 대역폭과 전력에 의해 제한을 받는 무선네트워크의 데이터 전송률을 증대시켜주는 효과적인 기술이다. 송수신단사이의 데이터 전송률은 채널용량에 의해 결정되며, MIMO기술은 이 채널용량을 적절히 이용함으로써 무선채널에서의 통신신뢰도를 높이는 이점을 가지고 있다. 본 논문은 Confluent Hypergeometric Function를 이용하여 새로운 공식 인 closed form capacity formula를 유도한다.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.15-20
• /
• 2013

In this paper, wireless power transfer system using the magnetic resonance was designed and applied to LED lighting for implementation of wireless lighting. This lighting was made by the converted DC driving type and the direct AC driving type. In the former, transferred AC power was rectified into DC and regulated to the specified voltage value, which leads to produce the loss at the rectifying and regulating circuit. In the latter, wireless-transferred AC power was directly applied to LED, which get rid of the loss derived from the additional circuit. For the efficiency-comparison between the former and the latter, the power at each stage was measured when the same optical output radiated from LED lighting part. The result revealed that the direct AC driving type had 18% higher efficiency than the DC driving type and confirmed that LED lighting using magnetic resonance wireless power transfer system can be efficient by direct AC power supply. And the direct AC driving type had the simple circuit structure and the simple LED lighting formation, so this can leads to various application.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.434-437
• /
• 2001

블루투스는 아직까지 유형적인 결과 없이 개념적으로만 성공을 거두었지만, 앞으로는 이용자와 무선 산업계에 있어 매우 중요한 의미를 가지게 될 것이다. 신규 진입자에게 있어서는 무선 산업 분야에서 새로운 지위를 얻을 수 있는 기회를 상징하는 한편, 기존의 사업자에게는 무선 제품 및 서비스에 대한 수요를 증대시키기 위한 주요 도구가 될 것이다. 그러나, 블루투스가 무선 데이터 분야에서 성공하기 위해서는 여전히 여러 가지 장애물을 극복해야만 한다. 따라서 본고에서는 우선 블루투스 기술에 대해 간단히 살펴본 후, 블루투스 기술이 무선 기술 및 시장 추진자로서 어떠한 잠재력을 갖고 있는지 그 가능성을 평가할 수 있는 간단한 시사점을 제시해 보고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1-2
• /
• 2015

In this paper, a 2-phase feeder system for wireless vehicle charging is investigated, which generates moving magnetic field with nearly constant magnitude using 2-phase currents. A moving field is very useful to magnetizing pickups mounted on underneath of electric vehicles.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.7-12
• /
• 2008

본 논문에서는 comb drive를 이용하여 수평 방향 저항 접촉 방식의 RF MEMS 스위치 개발을 소개한다. 무선통신 트랜시버에서 사용되는 FEM에서 사용될 수 있는 높은 안전성과 좋은 RF 특성을 가지는 스위치의 개발을 목표로 한다. 따라서 작은 삽입손실 특성을 가지기 위해 comb drive를 이용하여 큰 접촉 힘을 발생시키고, 큰 격리도 특성을 가지기 위해 스위치 off 상태에서 작은 정전용량을 갖도록 한다. 그리고 단결정 실리콘을 스위치의 구조물로 사용함으로써 기계적인 안전성을 갖도록 한다. 개발된 RF MEMS 스위치는 26 V의 동작 전압을 가지며, 2 GHz에서 0.44 dB 이하의 삽입손실과 60 dB 이상의 격리도 특성을 가진다.