• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.47-58
• /
• 2009

In this study, a Hardware-In-the-Loop (HIL) simulator using thrusters is developed to validate the spacecraft attitude system. To control the attitude of the simulator, eight cold gas thrusters are aligned with roll, pitch and yaw axis. Also linear actuators are applied to the HIL simulator for automatic mass balancing to compensate the center of mass offset from the center of rotation. The HIL simulator consists of an embedded computer (Onboard PC) for simulator system control, a wireless adapter for wireless network, a rate gyro sensor to measure 3-axis attitude of the simulator, an inclinometer to measure horizontal attitude, and a battery set to supply power for the simulator independently. For the performance test of the HIL simulator, a bang-bang controller and Pulse-Width Pulse-Frequency (PWPF) modulator are evaluated successfully. The maneuver of 68 deg. in yaw axis is tested for the comparison of the both controllers. The settling time of the bang -bang controller is faster than that of the PWPF modulator by six seconds in the experiment. The required fuel of the PWPF modulator is used as much as 51% of bang-bang controller in the experiment. Overall, the HIL simulator is appropriately developed to validate the control algorithms using thrusters.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2006

In this paper a design and implementation method of remote control system for automobile is presented. For this, we used the Bluetooth technology for remote and wireless communications and microcontroller for system control. By using these techniques, we can design and implement automobile remote control system to improve data error rate, security and application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.503-506
• /
• 2015

In accordance with IoT(Internet of Things) commercialization, the need to design SoC-based hardware platform with wireless communication is increasing. This paper therefor proposes an SoC platform architecture with Smart Frame System inter-communicating between devices. Wireless communication functions and high-performance real-time image processing hardware structure was applied to existing digital photo frame. We developed a smart phone application to control the smart frame through Bluetooth communication. The SoC platform hardware consists of CIS controller, Memory controller, ISP(Image Signal Processing) module for image scaling, Bluetooth Interface for inter-communicating between devices, VGA/TFT-LCD controller for displaying video. The Smart Frame System to support the IoT services was implemented and verified using HBE-SoC-IPD test board equipped with Virtex4 XC4VLX80 FPGA. The operating frequency is 54MHz.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.3
• /
• pp.92-97
• /
• 2011

In this paper, a controller recognizing human gestures using EMG signal is shown. The tiny and band-type controller is developed for image training to excercise the specific area in the body, and uses a dry-type silver fiber electrode easy to be attached or detached itself to a skin. The captured EMG signals are converted to 10-bit digital values via amplification and frequency filtering processes within the controller, and are transmitted to the server by wireless. As the gesture recognition ratio using the proposed controller on biceps is up to 80%, we expect the practical potential of the controller is very promising.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.57-70
• /
• 2008

This paper introduces a new paradigm of physical layer security through channel coding for wireless networks. The well known spread spectrum based physical layer security in wireless network is applicable when code division multiple access (CDMA) is used as wireless air link interface. In our proposal, we incorporate the proposed security protocol within channel coding as channel coding is an essential part of all kind of wireless communications. Channel coding has a built-in security in the sense of encoding and decoding algorithm. Decoding of a particular codeword is possible only when the encoding procedure is exactly known. This point is the key of our proposed security protocol. The common parameter that required for both encoder and decoder is generally a generator matrix. We proposed a random selection of generators according to a security key to ensure the secrecy of the networks against unauthorized access. Therefore, the conventional channel coding technique is used as a security controller of the network along with its error correcting purpose.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.1
• /
• pp.29-43
• /
• 2019

In recent years, as the network traffic in the WSN(Wireless Sensor Network) has been increased by the growing number of IoT wireless devices, SDWSN(Software-Defined Wireless Sensor Network) and its security that aims a secure SDN(Software-Defined Networking) for efficiently managing network resources in WSN have received much attention. In this paper, we study on how to efficiently and securely design a PUF(Physical Unclonable Function)-assisted group key distribution scheme for the SDWSN environment. Recently, Huang et al. have designed a group key distribution scheme using the strengths of SDN and the physical security features of PUF. However, we observe that Huang et al.'s scheme has weak points that it does not only lack of authentication for the auxiliary controller but also it maintains the redundant synchronization information. In this paper, we securely design an authentication process of the auxiliary controller and improve the vulnerabilities of Huang et al.'s scheme by adding counter strings and random information but deleting the redundant synchronization information.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.178-184
• /
• 2010

In this study, a smoke or a heat which occurs by a fire is perceived by wireless detector, this signal is transmitted to the receiving device by the wireless installation which is not the wire device and wire/wireless integration system which sends this signal to main server via wire system is proposed. In addition wireless heat/smoke detector, wireless module, firmware and wire/wireless integration controller were developed and for verifying regarding the efficiency and applicability of wire/wireless installation actual place application experiment was really accomplished with a transmission tower, a multipurpose building, and a station etc of the subway. The experimental result, it could operate the system which is proposed normally with all experimental object ones and, future actual place application possibility could verify.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.225-227
• /
• 2008

In this paper, universal wireless remote controllers are proposed. It can be used for general welding power sources. Sometimes, wireless remote controllers for welders are needed because welding torches are far away from welding sources in the case of big ship-building or big tank constructions. In order to use the wireless remote controllers, digital cpu-based welding systems are essential for digital interfaces. But, in this paper, using digital resistors makes wireless remote controllers be easily applied to digital or analog welders. To demonstrate the practical significance of our results, some experimental results are presented.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.499-501
• /
• 2004

This paper deals with the implementation of a quadruped working robot using wireless sensor network with TinyOS. It is often required to install real time OS and wireless network in the mobile robot field since robots work alone without human intervention and also exchanging their information between robot systems. The suggested controller utilizes a built-in wireless network OS and makes the variance action related with human-kindly motions for a quadruped walking robot. In addition, a kinematics analysis of its structure and control architecture of robot system is suggested and verified the usefulness through the real experiment.