• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2435-2453
• /
• 2015

Independent component analysis (ICA) is a signal processing technique used for un-mixing of the mixed recorded signals. In wireless communication, ICA is mainly used in multiple input multiple output (MIMO) systems. Most of the existing work regarding the ICA applications in MIMO systems assumed static or quasi static wireless channels. Performance of the ICA algorithms degrades in case of time varying wireless channels and is further degraded if the data block lengths are reduced to get the quasi stationarity. In this paper, we propose an ICA based MIMO transceiver that performs well in time varying wireless channels, even for smaller data blocks. Simulation is performed over quadrature amplitude modulated (QAM) signals. Results show that the proposed transceiver system outperforms the existing MIMO system utilizing the FastICA and the OBAICA algorithms in both the transceiver systems for time varying wireless channels. Performance improvement is observed for different data blocks lengths and signal to noise ratios (SNRs).

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.45-53
• /
• 2005

In this paper, we present a cross-layer analysis of wireless TCP systems over correlated channels. The effects of error correlation on the behavior of link retransmission strategy and the end-to-end throughput of TCP layer are investigated. Based on the cross-layer analysis, an efficient refinement of link layer protocol is proposed by consciously utilizing the information of channel correlations, which leads to the performance improvement of wireless TCP systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.247-254
• /
• 2014

For wireless multimedia sensor network (WMSN), it is crucial to select appropriate channels to deliver multimedia data stream generated by image and voice sensors periodically or continuously. Although most of previous researches assume that fixed channels are used for wireless sensor networks, they causes limit to support various application areas. In this paper, we apply link-setup algorithms developed for wireless cognitive radio networks for searching common channels between two nodes without common control channels. We also show the algorithm causes serious performance degradation as the total number of used channels increases, and then propose a new link-setup algorithm to resolve the problem. Therefore, the proposed algorithm shows 30 % higher performance compared to existing algorithms.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.104-114
• /
• 2007

In this paper, an Ad-hoc Routing Protocol that works in wireless Ad-hoc communication networks with multiple radios and multiple channels and that controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, the MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which allows full duplex transmission between wireless Ad-hoc nodes, and reduces intra interference on the route. Also, a fixed channel only for reception at each node enables the estimation of the available bandwidth, which is used to control the call admission for QoS provision. The performance of the MCQosR was verified by simulation.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.215-222
• /
• 2014

In this paper, we discuss optical encryption and decryption considering wireless communication channels. In wireless communication systems, the wireless channel causes noise and fading effects of the transmitted information. Optical encryption technique such as double-random-phase encryption (DRPE) is used for encrypting transmitted data. When the encrypted data is transmitted, the information may be lost or distorted because there are a lot of factors such as channel noise, propagation fading, etc. Thus, using digital modulation and maximum likelihood (ML) detection, the noise and fading effects are mitigated, and the encrypted data is estimated well at the receiver. To the best of our knowledge, this is the first report that considers the wireless channel characteristics of the optical encryption technique.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.194-203
• /
• 2008

This paper considers the multi-input multi-output (MIMO) relay channel where multiple antennas are employed by each terminal. Compared to single-input single-output (SISO) relay channels, MIMO relay channels introduce additional degrees of freedom, making the design and analysis of optimal cooperative strategies more complex. In this paper, a partial cooperation strategy that combines transmit-side message splitting and block-Markov encoding is presented. Lower bounds on capacity that improve on a previously proposed non-cooperative lower bound are derived for Gaussian MIMO relay channels.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.147-155
• /
• 2012

Fountain codes ensure reliability and robustness for time varying channels in wireless communication. In this paper, the concatenated fountain codes for AWGN and slow fading channels are investigated. Wireless system model, which includes the concatenated fountain code and modulation, is proposed. Maximum achievable rate is used for analyzing the performance of the system model for AWGN and fading channels. Belief Propagation (BP) algorithm is used for exploiting the soft information received at the decoder. Simulation results show that, concatenated fountain codes performs significantly better than that of a conventional Fountain codes with large packet lengths for higher Signal to Noise Ratio (SNR) in slow fading channels.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.98-106
• /
• 2009

This paper proposes an optical wireless transfer agent method which realizes the continuous and swift data transfer of optical wireless terminals in optical wireless networks. The unguided wireless channel generally shows frequent link disconnections and propagation delays due to weak wireless links. Specially speaking, optical wireless channels have more vulnerable links and roaming propagation delays relative to the weakness of the previous RF channels due to their low signal connectivity and small geographic coverage. Conventional optical wireless network protocols did not consider any fault models about physical link faults. Consequently, they have shown data transfer inefficiency for both data link control and physical wireless link control. To overcome these optical wireless environmental problems, this paper suggests a new wireless access point (or base station) agent system, which provides wireless or mobile clients with previous link layer protocols compensated.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.884-891
• /
• 2016

The wireless mesh network (WMN) has attracted significant interests as a broadband wireless network to provide ubiquitous wireless access for broadband services. Especially with incorporating multiple orthogonal channels and multiple directional antennas into the WMN, each node can communicate with its neighbor nodes simultaneously without interference between them. However, as we allow more freedom, we need a more sophisticated algorithm to fully utilize it and developing such an algorithm is not easy in general. In this paper, we study a joint channel assignment, link scheduling, routing, and rate control problem for the WMN with multiple orthogonal channels and multiple directional antennas. This problem is inherently hard to solve, since the problem is formulated as a mixed integer nonlinear problem (MINLP). However, despite of its inherent difficulty, we develop an algorithm to solve the problem by using the generalized Benders decomposition approach [2]. The simulation results show the proposed algorithm provides the optimal solution to maximize the network utility, which is defined as the sum of utilities of all sessions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.269-286
• /
• 2011

In this paper, we study a problem that is concerning how to construct a delay-constrained multicast tree on a wireless mesh network (WMN) such that the number of serviced clients is maximized. In order to support high-quality and concurrent interference-free transmission streams, multiple radios are implemented in each mesh node in the WMNs. Instead of only orthogonal channels used for the multicast in the previous works, both orthogonal and partially overlapping channels are considered in this study. As a result, the number of links successfully allocated channels can be expected to be much larger than that of the approaches in which only orthogonal channels are considered. The number of serviced subscribers is then increased dramatically. Hence, the goal of this study is to find interference-free and delay-constrained multicast trees that can lead to the maximal number of serviced subscribers. This problem is referred as the MRDCM problem. Two heuristics, load-based greedy algorithm and load-based MCM algorithm, are developed for constructing multicast trees. Furthermore, two load-based channel assignment procedures are provided to allocate interference-free channels to the multicast trees. A set of experiments is designed to do performance, delay and efficiency comparisons for the multicast trees generated by all the approximation algorithms proposed in this study.