• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1311-1321
• /
• 2010

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In this paper, we propose SET(SendDoneEventbasedTransmission Technique)which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In SET, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore SET could provide high packet transmission rate given large amount of packets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2109-2116
• /
• 2014

This paper presents the implementation and design of the advanced WI-FI systems with beam-forming antenna that radiate their power to the direction of user equipment to improve the overall throughput, contrast to the general WI-FI systems equipped with omni-antenna. The system consists of patch array antenna, DSP, FPGA, and Qualcomm's commercial chip. The beam-forming system on the FPGA utilizes the packet information from Qualcomm's commercial chip to control the phase shifters and attenuators of the patch array antenna. The PCI express interface has been used to maximize the communication speed between DSP and FPGA. The directions of arrival of users are managed using the database, and each user is distinguished by the MAC address given from the packet information. When the system wants to transmit a packet to one user, it forms beams to the direction of arrival of the corresponding user stored in the database to maximize the throughput. Directions of arrival of users are estimated using the received preamble in the packet to make its SINR as high as possible. The proposed beam-forming system was implemented using an FPGA and Qualcommm's commercial chip together. The implemented system showed considerable throughput improvement over the existing general AP system with omni-directional antenna in the multi-user communication environment.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.484-493
• /
• 2001

As real-time database systems are extended to the distributed computing environment, the need to apply the existing real-time concurrency control schemes to the distributed computing environment has been made. In this paper we propose an efficient concurrency control scheme for distributed real-time database system. Our proposed scheme guarantees a transaction to commit at its maximum, reduces the restart of a transaction that is on the prepared commit phase, and minimizes the time of the lock holding. This is because it raises the priority of the transaction that is on the prepared commit phase in the distributed real-time computing environment. In addition, it reduces the waiting time of a transaction that owns borrowed data and improves the performance of the system, as a result of lending the data that the transaction with the raised priority holds. We compare the proposed scheme with DO2PL_PA(Distributed Optimistic Two-Phase Locking) and MIRROR(Managing Isolation in Replicated Real-time Object Repositories) protocol in terms of the arrival rate of transactions, the size of transactions, the write probability of transactions, and the replication degree of data in a firm-deadline real-time database system based on two-phase commit protocol. It is shown through the performance evaluation that our scheme outperforms the existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1501-1509
• /
• 2001

Recently, the use of wireless communication systems has been rapidly increasing, which results in a difficult problem in efficient control of limited frequency resources. As a way of solving this problem, the ultra wideband time hopping impulse radio system attracts much attention. The impulse radio system communicates pulse position modulated data using Gaussian monocycle pulses of very short duration less than 1 nsec. Thus the transmitted signal has very low power spectral density and ultra wide bandwidth from near D.C. to a few GHz. It is blown that it hardly interferes with the existing communication systems because of its very low power spectral density. The purpose of this paper is to characterize multipath propagation of the impulse radio signal and to evaluate the performance of the correlator-based receiver for the multipath environments. In this paper, we consider the deterministic two-path model and the statistical indoor multipath model of Saleh and Valenzuela. For the two-path model the output of the correlator with the ideal reference waveform varies according to the relative difference between the indirect path delay and the time interval of PPM, and to the indirect path gains. In addition, the characteristics of bit error rates is measured for the two models through computer simulation. The simulation results indicate that the performance of the impulse radio system depends both on the relative difference between the indirect path delay and the time interval of PPM, and on the indirect path gains. Furthermore, it is observed that the reference signal designed for the AWGN channel can not be applied to the multipath channels.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.239-246
• /
• 2012

The function of location estimation in WPAN has been studied and specified on the ultra wide band optionally. But the devices based on CSS(Chirp Spread Spectrum) specification has been used widely in the market because of its functionality, cheapness and support of development. As the CSS device uses 2.4GHz for a carrier frequency and the sampling frequency is lower than that of the UWB, the resolution of a timestamp is very coarse. Then actually the error of a measured distance is very large about 30cm~1m at 10 m depart. And the location error in ($10m{\times}10m$) environment is known as about 1m~2m. So for some applications which require more accurate location information, it is very natural and important to develop a sophisticated post processing algorithm after distance measurements. In this paper, we have studied extended Kalman filter with the frequency offsets of anchor nodes, and proposed a novel algorithm frequency offset compensated extended Kalman filter. The frequency offsets are composed with a variable as a common frequency offset and constants as individual frequency offsets. The proposed algorithm shows that the accurate location estimation, less than 10cm distance error, with CSS WPAN nodes is possible practically.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.3
• /
• pp.67-76
• /
• 2020

With the fast development in wireless communications and vehicular technologies, vehicular ad hoc networks (VANETs) have enabled to deliver data between vehicles. Recently, VANETs introduce a Vehicular Cloud (VC) model for collaborating to share and use resources of vehicles to create value-added services. To construct a VC, a vehicle should search vehicles that intend to provide their own resource. The single-hop search cannot search enough provider vehicles due to a small coverage and non-line-of-sights of communications. On the other hand, the multi-hop search causes very high traffics for large coverage searching and frequent connection breakages. Recently, many Roadside Units (RSUs) have been deployed on roads to collect the information of vehicles in their own coverages and to connect them to Internet. Thus, we propose a RSU-aided vehicular resource search and cloud construction mechanism in VANETS. In the proposed mechanism, a RSU collects the information of location and mobility of vehicles and selects provider vehicles enabled to provide resources needed for constructing a VC of a requester vehicle based on the collected information. In the proposed mechanism, the criteria for determining provider vehicles to provide resources are the connection duration between each candidate vehicle and the requester vehicle, the resource size of each candidate vehicle, and its connection starting time to the requester vehicle. Simulation results verify that the proposed mechanism achieves better performance than the existing mechanism.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.935-944
• /
• 2002

It is the Mobile Ad Hoc Networks that constituted with serveral mobile node that can communicate with other mobile nodes. Until now, there were no routing protocols considering such as Multimediadata, VOD (Video On Demand), which is required of lots of bandwidth in Mobile Ad Hoc Network, io we are in the need of QoS (Quality of Service)routing protocol to transmit the data packets faster and more accurate. Also, there are an unidirectional links due to asymmetric property of mobile terminals or current wireless environments on practical mobile ad hoc networks. However, at present, the existing mobile ad hoc routing protocols are implemented to support only bidirectional links. In this paper, we propose the Advanced Routing routing protocol in order to implement a new routing protocol, which is fit to mobile ad hoc networks containing unidirectional links and to support QoS service. For the performance evaluation, we use NS-2 simulator of U.C. Berkeley. We could get not only increased received data rate and decreased average route discovery time, but also network load decreases with compared Best effort service.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1221-1230
• /
• 2004

In mobile environments, the locations of moving objects such as vehicles, airplanes and users of wireless devices continuously change over time. For efficiently processing moving object information, the database system should be able to deal with large volume of data, and manage indexing efficiently. However, previous research on indexing method mainly focused on query performance, and did not pay attention to update operation for moving objects. In this paper, we propose a novel moving object indexing method, named ACAR-Tree. For processing efficiently frequently updating of moving object location information as well as query performance, the proposed method is based on fixed grid structure with auxiliary R-Tree. This hybrid structure is able to overcome the poor update performance of R-Tree which is caused by reorganizing of R-Tree. Also, the proposed method is able to efficiently deal with skewed-. or gaussian distribution of data using auxiliary R-Tree. The experimental results using various data size and distribution of data show that the proposed method has reduced the size of index and improve the update and query performance compared with R-Tree indexing method.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1247-1258
• /
• 2004

The LBS(Location-Based Service), which is based on individual's mobility, is required increasingly as mobile telecommunication and various infrastructures have developed rapidly. The technologies for LBS are location determination technology, service platform technology, contents provider technology and moving object database technology generally. Among these, service platform must be interoperable with location gate-way server and provide common function of billing, authentification, protect location information, privacy control, location trigger and intelligent acquisition and so on. The TTA(Telecommunications Technology Association) published specification that defines a standard protocol for safe and simple interface between LBS client and LBS platform and the OpenLS(Open Location Service) in OGC (Open GIS Consortium) released implementation specifications for providing Location based core services. In this paper, we implemented service platform for LBS which is able to interoperable with location gateway server and contents provider and is caracterized as follows. First, it could require and response location information from different types of location gateway server with same interface. Second, it complies with the standard interfaces with OpenLS 4 contents providers for core LBS. Third, it could provide location of wired phone as well as wireless mobile terminal compling with the standard protocol. Last, it could provide trajectorH information based past location as well as current location, because it is able to interoperable with moving object DBMS. This paper contributes to the construction and practical use of LBS by providing the method of implementation of service platform for LBS.