• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.57-64
• /
• 2001

The high speed in the wire-drawing process to meet the demands for the increased productivity has a great effect on the heat generated due to plastic deformation and friction between the wire and the drawing dies. During the high carbon steel wire drawing process, the temperature rise gives a great influence to the fracture of wire. In this paper, to control the temperature rise in the wire after the deformation through the drawing die, the calculation method of the wire temperature, which includes the temperature rise in the deformation zone as well as the temperature drop in the block considering the heat transfer among the wire, cooling water and surrounding air, is proposed. These calculated results of the wire temperature at the inlet and exit of the drawing die at each pass are compared with the measured wire temperatures and verified its efficiency. So, using the program to predict the wire temperature, the isothermal pass schedule program was developed. By applying this isothermal pass schedule program to the conventional process condition, a new isothermal pass schedule is redesigned through all passes. As a result, the possibility of wire fracture could be considerably reduced and the productivity of final product could be more increased than before.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.87-94
• /
• 2001

Scale is agglomerate or thin film compounded of soluble salts in papermaking process. It causes many problems such as closing up pipelines, contaminating wire and felt, decreasing efficiency of additives and paper quality. In this study, physical factors related to forming scale in white water are determinated and optimum conditions are proposed. To control scale, ACP(Acrylacid Copolymer) was synthesized and compared with conventional chemicals such as EDTA, DTPA and STPP.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.6
• /
• pp.279-285
• /
• 2008

This study includes the efficiency assessment of a multiple access protocol for UUV (Underwater unmanned vehicle) control. Most of UUVs are controled by wire now; however, wireless control is demanded because of the demerit of the wire control that limits the place and activity. This study simulates efficiency of a standardization multiple access protocol (Pure ALOHA, Slotted ALOHA, Nonpersistent CSMA, Slotted Nonpersistent ISMA) formed for the purpose of performing wireless communication controlled by the ship or communication buoy at the sea surface and by the under water communication node at the bottom in order to efficiently control the UUV's. Results show that no significant changes occur related to changing type of the mother ship and the communication node; In addition, the Non-persistent CSMA and the Slotted Non-persistent ISMA show relatively high efficiency for underwater acoustic communication.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.745-752
• /
• 2006

DOS and NaCl aerosol particles were used to determine collection efficiencies of a 2-stage electrostatic wet scrubber with respect to particle size. The DOS and NaCl aerosols have geometric mean diameters of 0.1-3.0 urn, geometric standard deviations of $1.1{\sim}1.8$ and total number concentrations of $450{\sim}2,400\;particles/cm^3$. The tested operating variables for the electrostatic wet scrubber included air velocity and water injection rate. It was shown from the experimental results that particle collection efficiencies increased in the submicron particle size range when different polarities were applied on the water nozzle and corona wire, respectively. This increase in the collection efficiency is attributed to strong electrostatic attraction between the negative water droplets and positive submicron particles. The collection efficiencies also increased when water injection rate was increased or air velocity was decreased. Meanwhile, the pressure drop across the wet scrubber decreased by 90% compared with the existing mechanical wet scrubber. Finally, ammonia gas was used to determine gas removal efficiencies. It was observed that the gas removal efficiencies increased when the air velocity was decreased or the water injection rate was increased.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.381-387
• /
• 2011

Measurement controller that acquire and control and observe data from scattering sensors is organic with central control room. Therefore, measurement controller is efficient wireless network than wire network. But, serious problem is happened in security from outside if use wireless network. Therefore, this paper proposed suitable MS-WP cryptographic system to measurement control wireless network to augment network efficiency of measure controller. Result that implement proposed MS-WP cryptographic system by chip level and achieve a simulation, confirmed that 130% processing rate increase and system efficiency are increased double than AES algorithm. Proposed MS-WP cryptographic system augments security and is considered is suitable to measurement controller because that low power is possible and the processing speed is fast.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.79-85
• /
• 1981

As one of the fundamental studies for the breeding of marine algae, the effects of several plant hormones (IAA, Gibberellin, 2.4-D, NAA, Kinetin) on the growth of Porphyra-fronds, P. tenera Kjell. form tamatsuensis Miura, were investigated from January 21 to February 21 1981. The fronds used for the experiment were dissected out at $25mm^2$ size, and cultured in modified Provasoli's ESP medium supplemented with various concentrations of each plant growth regulators. The culture was kept under constant water temperature of $5^{\circ}C$ in 14 hrs. photoperiod and illuminated with 2,400 lux by fluorescent light. Based on the results of first experiment, the culture of fronds for the secondary experiment was carried out at $5^{\circ}C\;and\;10^{\circ}C$ in medium containing various levels of Kinetin from April 6 to 24, and compared the growth of two groups at each concentrations with each other, The results obtained are summarized as follows : (1) The best growth efficiencies were observed at 5.0mg/1 of each plant hormones except Gibberellin. Among them, the highest growth-rate was $312.5\%\;(345.3\%\;in\;frond\;size)$ in contrast with control at 5.0mg/1 of Kinetin, and was followed by $257.5\%\;(236.1\%)$ in 2.4-D,$166.7\%(147.6\%)$ in IAA and $141.7\%\;(167.7\%)$ in NAA, but that in Gibberellin was $247.9\%(241.9\%)$ at 10.0mg/l. (2) Especially, the fronds cultured at 5.0mg/1 of Kinetin were deep black-brown in colour, and had vivid, healthy chloroplasts in their all cells. On the contrary, the fronds cultured in other media were discoloured to light black-brown or green-drown, and almost all cells were vacuolated or shrunk gradually into death.(3) There was an obvious difference between the best growth-rates of the fronds cultured at 5.0mg/l of Kinetin at $5^{\circ}C$ and those at $10^{\circ}C$. The former was $366.7\%$, the latter $318.8\%$ but the difference was little at lower concentrations. (4) Many abnormal cells grown up to $25.0-27.5\mu$ in diameter were found among the marginal cells of fronds which showed the best growth in Kinetin, and the fronds wire $41.0-42.0\mu$ in thickness which was thicker by $10.0\mu$ or so than the others. (5) In two fronds at 1.0mg/1 of Kinetin cell-divisions were observed, which might developed into antheridium, but it was doubtful whether due to the efficiency of Kinetin.