• Journal of Life Science
• /
• v.24 no.3
• /
• pp.290-296
• /
• 2014

The present experiment investigated putative anxiolytic-like effects of quercetin using an elevated plus-maze (EPM) and hole-board apparatus test in mice. Quercetin is a flavonoid widely distributed in nature. Quercetin (1.25, 2.5, 5, or 10 mg/kg) was orally administered to ICR mice 1 h before a behavioral evaluation in the EPM. Control mice were treated with an equal volume of vehicle, and positive control mice were treated with buspirone (2 mg/kg, i.p.). The mice administered quercetin (5 mg/kg) spent a significantly longer percentage of time in the open arms of the EPM and their percentage of entries into the open arms was significantly increased compared to the vehicle-treated controls (p<0.05). The anxiolytic-like activities of quercetin were antagonized by trans-4-aminocrotonic acid (a $GABA_{A-{\rho}}$ agonist, 20 mg/kg) but not by flumazenil (a $GABA_A$ antagonist, 10 mg/kg) or WAY-100635 (a $5-HT_{1A}$ antagonist, 0.3 mg/kg). Moreover, there were no changes in the locomotor activity or myorelaxant effects in any group compared with the vehicle-treated controls. In the hole-board apparatus test, the number of head-dips increased significantly in the single treatment with quercetin (5 mg/kg) group compared to the vehicle-treated controls (p<0.05). These findings suggest that quercetin can promote anxiolytic-like activity, mediated by the GABAergic nervous system, in mice.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.4
• /
• pp.215-219
• /
• 2009

A packaging technology based on flip-chip bonding and Pb-free solder for silicon pressure sensors on printed circuit board (PCB) is presented. First, the bump formation process was conducted by Pb-free solder. Ag-Sn-Cu solder and the pressed-screen printing method were used to fabricate solder bumps. The fabricated solder bumps had $189-223{\mu}m$ width, $120-160{\mu}m$ thickness, and 5.4-6.9 standard deviation. Also, shear tests was conducted to measure the bump shear strength by a Dage 2400 PC shear tester; the average shear strength was 74 g at 0.125 mm/s of test speed and $5{\mu}m$ shear height. Then, silicon pressure sensor packaging was implemented using the Pb-free solder and bump formation process. The characteristics of the pressure sensor were analogous to the results obtained when the pressure sensor dice are assembled and packaged using the standard wire-bonding technique.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11a
• /
• pp.31-75
• /
• 2000

The tractor is the most important machine for farming keeping probably this position also for feeding the future fast growing world population. Band width of power and functions continues to increase worldwide, examples are given. Regarding the high developed countries, general farming demands as well as precision farming issues require closed loop control principles for the system "driver-tractor-implement". Progress in information technologies supports this trend, but comprehensive component and system developments are necessary to make the tractor ready for automatic or semi-automatic controls. The following technical highlights are, for example, discussed for Europe: hydropneumatic front axle suspensions, 50 km/h top speed, front brakes, electronically controlled multivalve diesel engines, automatic hydrostatic power split CVTs, load sensing hydraulics with proportional valves, improved cab and working places with "operations by wire" and more electronics on board than ever before.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.627-631
• /
• 2015

Conventional etching technology is in the face of problems such as dishing, erosion resulting from non-uniform removal of film. Advanced printed circuit board (PCB) requires accurate wire formation with the aid of planarization by chemical mechanical polishing (CMP). Linear roll CMP is a line contact continuous process which removes the film by pressurization and rotation while slurry is supplied to polishing pad attached to the roll. This paper focuses on the design of floating nozzle on the linear roll CMP equipment which makes the slurry supply uniformly on the roll pad. Experimental results show that removal rate using the floating nozzle increases 3 times higher than that without it and non-uniformity is less than 15%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.222-222
• /
• 2009

Currently in electric railways, there are various test standards for catenary systems such as stability assessment standards and maintenance standards for appropriate vehicle operation. In Korea, maintenance vehicles are used to measure height, stagger, and wear of catenaries and various tests are being conducted based on maintenance manuals. In this paper, real-time data aquisition technologies for assessment of electric railway current collection status between catenaries and pantographs that are consistantely being developed from the adoption of electric railways were analyzed based on on-board measurement items.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.429-432
• /
• 2007

For smart structure technologies, the interests in wireless sensor networks for structural health monitoring are growing. The wireless sensor networks reduce the installation of the wire embedded in the whole structure and save the costs. But the wireless sensor networks have lots of limits and there are lots of researches and developments of wireless sensor and the network for data process. Most of the researches of wireless sensor network is applying to the civil engineering structure and the researches for the highrise building are required. And strain-based SHM gives the local damage information of the structures which acceleration-based SHM can not. In this paper, concept of wireless sensor network for structural health monitoring of highrise building is suggested. And verifying the feasibility of the strain-based SHM a strain sensor board has developed and tested by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.72-80
• /
• 1997

A 750 MHz CATV amplifier module has been designed and fabricated using PHEMT chips on alumina board. Developed 2-stage push-pull amplifier using wire bounded PHEMT chips shows 19dB gain, 15dB return loss and 4. 2dB noise figure over 50-750MHz frequency range. These results are superior to the characteristics of the commer-cially abailable 750MHz amplifier module. In this paper, brief background of the amplifier design, the circuit diagram and the test result have been presented.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.1-8
• /
• 2001

A school record system by mobile phones is developed using the mobile agent. This developed system support all the wireless protocols by o combined wire and wireless internet Sever for WAP, ME. As a result, it is possible for a student to check his result of achievement and bulletin board by his mobile terminal anywhere, anytime.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.1
• /
• pp.23-28
• /
• 2010

The cylindrical magnetron sputtering has not been widely used, although this system is useful for only certain types of applications such as fiber coatings. This paper presents electrode configurations which improved the complicacy of the target assembly by using the positive voltage power supply. It is a modified type which has a target constructed with a large cylindrical part, a conical part and a small cylindrical part. When positive voltage was applied to an anode, a stable glow discharge was established and a high deposition rate was obtained. The substrate bias current was monitored to estimate the effect of ion bombardment. As a result, it was found that the substrate current was large. With cylindrical and conical cathode magnetron sputter deposition on the surface of the substrate to prevent re-sputtering, ion impact because it can increase the effectiveness with excellent ductility and adhesion of Ti film deposition can be obtained. We board at the front end of the ground resistance of $5\;k{\Omega}$ attached to the substrate potential can be controlled easily, and Ti film deposition with excellent adhesion can be obtained. Microstructure and morphology of Ti films deposited on pure Cu wires were investigated by scanning electron microscopy in relation to preparation conditions. High level ion bombardment was found to be effective in obtaining a good adhesion for Cu wire coatings.

• International Journal of Safety
• /
• v.11 no.2
• /
• pp.15-21
• /
• 2012

This paper is aimed to develop an electrical fire detection system (EFDS) which can analyze the possibility of electrical fire for overcurrent, leakage current and arc signals of panel board in traditional market shop. The EFDS adopted fuzzy logic and precursory data for overcurrent, leakage current and arc signals to evaluate the possibility of electrical fire. The signals are obtained directly from panel board in traditional market shops and fuzzy membership function is obtained from experiment, simulation, expert's advice. The overcurrent data is acquired by thermal data of normal and abnormal states (partial disconnection) on the insulated electrical wire, in accordance with the increase of the current signal, The leakage current data is obtained under various environments. The arc signal is acquisited by waveforms of instantaneous value in time domain and frequency band in frequency domain. The Fuzzy algorithm for DB of EFDS consists of fuzzification, inference engine by Mamdani's method and defuzzification by center of gravity method. In order to verify the performance and reliability of EFDS, it was applied to Jeon-Ju traditional market shops (90 shops) in Korea. Results show that EFDS in this paper is useful in alarming the fire case, which will prevent severe damage to human beings and properties, and reduce the electrical fires in a vulnerable area of electrical disaster.