• Restorative Dentistry and Endodontics
• /
• v.41 no.2
• /
• pp.106-113
• /
• 2016

Objectives: This study evaluated the effects of different surface conditioning methods on the bond strength of orthodontic brackets to glazed full-zirconia surfaces. Materials and Methods: Glazed zirconia (except for the control, Zirkonzahn Prettau) disc surfaces were pre-treated: PO (control), polishing; BR, bur roughening; PP, cleaning with a prophy cup and pumice; HF, hydrofluoric acid etching; AA, air abrasion with aluminum oxide; CJ, CoJet-Sand. The surfaces were examined using profilometry, scanning electron microscopy, and electron dispersive spectroscopy. A zirconia primer (Z-Prime Plus, Z) or a silane primer (Monobond-S, S) was then applied to the surfaces, yielding 7 groups (PO-Z, BR-Z, PP-S, HF-S, AA-S, AA-Z, and CJ-S). Metal bracket-bonded specimens were stored in water for 24 hr at $37^{\circ}C$, and thermocycled for 1,000 cycles. Their bond strengths were measured using the wire loop method (n = 10). Results: Except for BR, the surface pre-treatments failed to expose the zirconia substructure. A significant difference in bond strengths was found between AA-Z ($4.60{\pm}1.08MPa$) and all other groups ($13.38{\pm}2.57-15.78{\pm}2.39MPa$, p < 0.05). For AA-Z, most of the adhesive remained on the bracket. Conclusions: For bracket bonding to glazed zirconia, a simple application of silane to the cleaned surface is recommended. A zirconia primer should be used only when the zirconia substructure is definitely exposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.9-18
• /
• 2022

As the COVID-19 continues, the demand for robotic technology that can be applied in face-to-face tasks such as delivery and transportation, is increasing. Although these technologies have been developed and applied in various industries, the robots can only be operated in a tidy indoor environment and have limitations in terms of payload. To overcome these problems, we developed a 2 degree of freedom(DOF) environmental adaptive robot leg with a double 1-DOF counterbalance mechanism (CBM) based on wire roller. The double 1-DOF CBM is applied to the two revolute joints of the proposed robot leg to compensate for the weight of the mobile robot platform and part of the payload. In addition, the link of the robot leg is designed in a parallelogram structure based on a belt pulley to enable efficient control of the mobile platform. In this study, we propose the principle and structure of the CBM that is suitable for the robot leg, and design of the counterbalance robot leg module for the environment-adaptive control. Further, we verify the performance of the proposed counterbalance robot leg by using dynamic simulations and experiments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.173-180
• /
• 2009

Very-early strength latex-modified concrete(below ; VES-LMC) was developed for possible early-opening-to-traffic after overlay of bridge deck concrete. The purpose of this study is to analyze the cause of map, transverse and longitudinal cracking in VES-LMC and to provide a control method for minimizing occurrence of cracking. The proposed prevention method against map and transverse cracking was verified by field data. VES cement was modified as the unit cement content was reduced from 390kg/$m^3$ to 360kg/$m^3$. The maximum size of coarse aggregate was increased from 13mm to 19mm. The wire mesh and steel fiber were adopted in concrete mixture. From the results, the proposed prevention method against map and transverse cracking was verified since structural cracking was not occurred until 3 years after overlay.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.2
• /
• pp.141-147
• /
• 2024

The objective of this study was carried to compare the effects of different packaging and loading materials and types on the cold storage of onions. The research was conducted for over a period of six months. Onions were divided into three groups based on the packaging materials and types: mesh bag (control), ton bag (TB), and wire mesh pallet (WMP). Parameters such as moisture content (%), total soluble solids (ºBrix), Hunter-color value, rotting rate (%), and hardness (g/force) were measured and analyzed. The results of the experiment demonstrated that there was no significant differences in onions' quality between TB and WMP and the control, respectively. This study showed that TB and WMP can be used as an alternative to controls to extend the storage-life of onions and keeping quality during long-term cold storage. Furthermore, WMP packing and loading type could be replaced to conventional storage method with better efficiency in logistics of smart APC (agricultural product processing center).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1039-1047
• /
• 2017

This paper presents a test development of a Fly-By-Wireless flight control system for a fixed-wing unmanned aerial vehicle (UAV). Fly-By-Wireless system (FBWLS) refers to a system that uses a wireless network instead of a wired network to connect sensors and actuators with a flight control computer (FCC), reducing considerable amount of wires. FBWLS enables to design a much lighter aircraft along with decreased maintenance time and cost. In this research we developed a Zigbee-based FWBLS UAV in which sensors (GPS and AHRS) are wirelessly connected via a FCC to aileron and elevator servo motors. In order to see the effect of time delay due to wireless signal on the flight stability of the UAV, several flight tests were conducted. From the tests, it was confirmed that the effect is minor by comparing the flight response of the FBWLS with the corresponding Fly-By-Wire system.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.2
• /
• pp.45-60
• /
• 2008

Objectives : Sopung-tang(Shufeng-tang) is a famous herbal prescription that treated ischemic brain injury. This study was designed to evaluate the effects of Sopung-tang(Shufeng-tang) on congnition and motor function recovery after ischemic brain injury in rats. Methods : Male rats were divided into 4 groups. Those rats caused ischemic brain injury by occlusion of MCA as Longa method. Control group I was per os normal saline for 7 days after ischemic brain injury. Control group II was per os normal saline for 14 days after ischemic brain injury. Experimental group I(Ex I) was taken with Sopung-tang(Shufeng-tang) for 7 days after ischemic brain injury. Experimental group II(Ex II) was taken with Sopung-tang(Shufeng-tang) for 14 days after ischemic brain injury. The author carried out neurological, cognitive motor behavior tests and histological assessment. Neurological motor behavior tests consist of limb placement test, beam-walking test and horizontal wire test. Morris water maze test was used for cognitive motor behavior test. In the histological assessment test, TTC(2,3,5-triphenylteterazolium chloride) staining, Hematoxylin & Eosin staining and immunohistochemical staining were experimented. Results : 1. In neurological motor behavior tests, motor function recovery was significantly increased in the experimental groups as compared with control groups(p<0.05). Especially Ex II was significantly increased as compared with Ex I(p<0.05). 2. In Morris water maze test, congnitive motor function recovery was significantly increased in the experimental groups as compared with control group(p<0.05). Especially Ex II was significantly increased as compared with Ex I(p<0.05). 3. In the immunohistochemical staining for the expression of BDNF in hippocampus, more immune reaction was investigated in the experimental groups as compared with control groups. Especially most immune reaction was experimented in the EX II. Conclusions : According to the above results, Sopung-tang(Shufeng-tang) can treat on the congnition and motor function recovery after ischemic brain injury in rats. And it is effective method in expression of BDNF in hippocampus.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.133-140
• /
• 2017

In this paper, we has proposed an automatic vehicle monitoring system based on computer vision technology. The real-time display system has displayed a system that can be performed in automatic monitoring and control while meeting the essential requirements of ITS. Another advantage has that for a powerful vehicle tracking, the main obstacle handing system, which has the shadow tracking of moving objects. In order to obtain all kinds of information from the tracked vehicle image, the vehicle must be clearly displayed on the surveillance screen. Over time, it's necessary to precisely control the vehicle, and a three-dimensional model-based approach has been also necessary. In general, each type of vehicle has represented by the skeleton of the object or wire frame model, and the trajectory of the vehicle can be measured with high precision in a 3D-based manner even if the system has not running in real time. In this paper, we has applied on segmentation method to vehicle, background, and shadow. The validity of the low level vehicle control tracker was also detected through speed tracking of the speeding car. In conclusion, we intended to improve the improved tracking method in the tracking control system and to develop the highway monitoring and control system.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.579-587
• /
• 2012

Shin-gumho station in Seoul underground subway have been selected to be experimentally investigated and analyzed for the real air supply & exhaust capacity compared to the original capacity of ordinary and emergency condition. The depth of Shin-gumho station is 43.6m which consists of the island-type platform ($8^{th}$ floor in underground) and a two-story lobby (first & second floor in underground). An emergency staircase connects between the platform and the lobby. Hot-wire anemometer, capture hood, wind vane & velocity meter and data acquisition systems are employed to perform the automatic measurement in this experiment. For ordinary case, air supply and exhaust capacity in the lobby were reduced by 34% and 46% compared to the original capacity, respectively. Air supply and exhaust capacity in the platform were reduced by 66% and 38%, respectively. For emergency case, air supply in the lobby was reduced by 42% and air exhaust in the platform was reduced by 28% compared to the original capacity. Therefore, air pollution in the station is expected to be worse in the ordinary environment and smoke control capability in the platform will be weakened in case of fire emergency.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.825-837
• /
• 1997

The purpose of this study was to evaluate the effect of splinting methods on the rearrangement of periodontal fibers after experimental tooth movement. Orthodontic force was applied by placing closed coil spring between upper third incisor and canine in seven dogs, weighing 20 kg or more. After 3 weeks of force application, 0.0215 inch multistrand wire and polyethylene ribbon were bonded to each side, as a flexible and rigid splinting respectively in 6 experimental animals. The remaining one served as a control. Each two animals were sacrificed at 4, 8 and 12 weeks after splinting respectively and prepared histologically for hematoxylin-eosin and Masson's trichrome staining. The results of this study were obtained as follows: 1. After tooth movement, periodontal space was narrowed and periodontal titers were thick on pressure side while elongated fibers were observed on tension side. 2. After 4 weeks of retention, the rearrangement of periodontal fibers was observed in the flexible splinting group, but not in the rigid splinting group. 3. After 8 weeks of retention, the rearrangement of periodontal titers was observed in both groups, but the difference could not be detected between two groups. 4. During the retention period, the rearrangement of periodontal fibers was faster in tension side than in pressure side. These results show that the rearrangement of periodontal fibers is also obtained by rigid splinting after tooth movement. It is suggested that the rigid splinting by polyethylene ribbon can be used as a way of postorthodontic retention.