• Fibers and Polymers
• /
• 제7권1호
• /
• pp.73-78
• /
• 2006

The ability to absorb liquid and the dust removal performance are important factors for wiping cloths used to remove contaminants. We have developed a method that can determine the contaminant removal performance of wiping cloths. In the gravimetric method, experimental errors are unavoidable because the contaminant plate is much heavier than the contaminant material. However, we used image analysis to reduce the experimental errors, and did not use the heavy contaminant plate. The correlation coefficient between the image. analysis and the gravimetric methods was very high, at R=0.97, with a significance level of 95%. From the correlation analysis and empirical data, the image analysis method is a useful tool for measuring wiping efficiency. The wiping efficiency measured using image analysis has a close relationship to the wiping speed, viscosity of the contaminant, and wiping pressure, at the significance level of 95%.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1344-1351
• /
• 2004

This study develops a haptic display model which is an indispensable for the force generation in the virtual environment. In developing the haptic display model, a Proxy concept and a Karnopp friction model are utilized to generate the reaction force and the friction force. Also this study develops a 2 D.O.F. remote wiping system. This system is composed of a 2 D.O.F. master manipulator, a force sensor equipped 2 D.O.F. slave manipulator and a real time controller. With the developed remote wiping system, this study identifies the friction characteristic of the aluminum, acryl and rubber plate. The results are used as the dynamic friction coefficient of the haptic display model. This study shows the efficiency of the developed haptic display model by the comparison between the friction characteristic of the haptic display with the developed haptic display model and the friction characteristic of the real aluminum, acryl and rubber plate.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.209-209
• /
• 2006

Ultra-fine fibers are spun by expensive fiber spinning technology using special spinnerets. Ultra-fine fibrous materials have attracted considerable attentions because of their potential applications as high performance wiping cloths, water absorbent sound proofing materials and moisture transfer sporting good. However, production expense of ultra-fine fibers is 5 to 7 times higher than general textile materials. The objective of this research is to develop cost-effective recycling process to produce multi-functional ultra-fine fibrous material in terms of the development of garnetting and carding machines for ultra-fine fibrous material waste and scrap. The efficiency of sound absorption for the recycled polyester nonwoven increased with decreasing length and thickness of component fibers, which was attributed to the reduction of air permeability. It is expected that high value and cost-effective textile products are developed using ultra-fine fibrous wastes and that sound proofing material and oil absorbent f

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.525-535
• /
• 2017

내열성이 우수하며, 태양광 모듈의 유리 표면에 방담성(antifogging) 및 방오성(antifouling)을 동시에 부여하여 효율을 향상시키기 위한 친수성 코팅액을 제조하기 위해 초친수성과 우수한 방담효과를 나타내는 Tween 20과 데카플루오로부탄과 폴리에틸렌글리콜 성분으로 구성된 불소계면활성제 수용액에 방오성 부여를 위하여 나노실리카를 분산하였다. 고온 처리에서 나노실리카의 함량에 따른 방담 효과는 모든 코팅액이 우수하였으나, 방오 효과는 나노실리카의 함량이 6 wt%일 때부터 나타났다. 불소계면활성제의 함량이 증가할수록 초기 접촉각이 증가하며 방담 효과도 500회 wiping까지 잘 유지되었다. 방오 효과 역시 불소계면활성제의 함량에 상관없이 우수하여 불소계면활성제의 적절한 첨가량은 0.1 wt%이상 이면 충분하였다. AFM 결과로부터 불소계면활성제가 0.1 wt%에서 0.3 wt%가 첨가된 경우 코팅 표면의 프랙탈구조가 확실히 나타나 방오성 향상에 기여하였다. 코팅된 유리의 투과도는 불소계면활성제가 0.1 wt% 첨가된 TL-1의 경우가 가장 높았으며 더 많은 양의 불소계면활성제를 첨가할 경우 오히려 투과도 향상은 미미하였다. 이러한 결과는 앞의 AFM 결과에서 나타난 표면 조도가 높으며 프랙탈구조 형성도 잘 일어난 TL-1 코팅액의 결과와 잘 일치하는 것이다.