• Journal of computational fluids engineering
• /
• v.3 no.2
• /
• pp.52-64
• /
• 1998

Numerical simulations on the flowfield of lifting chamber for Wing-In-Ground vehicle were performed using Fluent/UNS 4.2 software. The trend of lifting force in lifting chamber and parametric study of geometric and fluid variables were primarily investigated. Selected parameters for investigation are inlet velocity, height between chamber and water level, depth of the skirt, location of inlet, variaton of height at bow and stern. Also, air capturing capabilities from downstream of the propeller were evaluated at the air inlet. The lifting force was increased linearly with the increased of inlet velocity and nonlinearly with the decrease of height force was increased with increased depth. It turned out to have very minor effect on lifting force to change the location of air inlet for lifting chamber, installed on top surface. Tilting the vehicle when it was lifted, the lifting forces, generated in each case, showed no appreciable changes.

• Journal of Hydrospace Technology
• /
• v.2 no.2
• /
• pp.14-23
• /
• 1996

The Reynolds-averaged Navier-Stokes equations for turbulent flow around a two-dimensional foil section moving ova. a flat surface (roller plate) is solved. The numerical method utilized the finite-difference schemes in collocated grids and the Baldwin-Lomax model is employed for turbulence closure. Calculations are carried out for three foil sections of different mean-line shape with various height ratio. As a foil approaches the bottom surface, the lift is augmented, while there exist some differences in pitching moment due to mean-line shape. It was found that the S-shaped mean line deteriorates lift characteristics but increases pitching moment to restore the designed height.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.5
• /
• pp.19-26
• /
• 1995

표면효과익선(WIG : Wing-In-Ground Effect Ship)은 해면 위를 낮게 비행함으로써 표면효과에 의한 양력 증가를 얻게 되어 초고속으로 운행할 수 있는 선박과 항공기의 중간형태의 차세대 해상운송 수단이다. 해면 위에 직접 이.착륙이 가능하기 때문에 별도의 활주로가 필요 없으며 수륙양용으로 사용 가능하다. 연근해 도서지방 관광 및 신선도 유지가 필수적인 신속화물의 수 송에도 사용될 수 있으며 해난사고 구난 및 해양 경비용으로도 사용가능한 해상 운송수단이다. 본 고에서는 표면효과익선의 특징을 간략히 살펴보고 21세기 고속해상운송수단으로 사용될 가 능성에 대한 경제성 검토 및 핵심애로기술을 살펴보았으며 러시아 표면효과익선의 발달과정과 개발된 선종의 특징을 조사하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.625-636
• /
• 2019

Recently, research on projectiles with wings for precision guidance is actively underway. In this study, we analyzed how the tail fins attached to the projectile affect the base drag. Aerodynamic analysis was performed with RANS(Reynolds Averaged Navier-Stokes) equations using FLUENT, a commercial CFD(Computational Fluid Dynamics) code. Through the aerodynamic analysis, the base drag characteristics of the projectile by parameters (number, length, thickness, position, shape of tail fin) were investigated. The results of this study are expected to be applicable to aerodynamic design of tail fins mounted on projectiles.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.5
• /
• pp.697-702
• /
• 2010

A WIG(Wing-In-Ground effect) craft flies close to the water surface by utilizing a cushion of relatively high pressurized air between its wing and water surface. This implies that when one designs such craft it is important to have lightweight structures with adequate strength to resist external loads with some margins. To investigate this requirement, this paper deals with the structural analysis of the bottom plate of small WIG craft having a design landing weight of 1.2-ton. As building materials for the WIG craft, pre-preg carbon/epoxy composites are considered. The strength information of the bottom plate is obtained using the first-ply-failure analysis in conjunction with a mid-plane symmetric laminated plate theory. As a result, the first-ply-failure location, load and deflection of the bottom plate are obtained. The calculated strength information is compared with the water reaction load for the bottom plate of seaplanes considered when they land on the water surface -the same fluid-structure interaction mechanism as that of WIG craft. In the calculation of seaplane water reaction load information, the rules shown in FAR(Federal Aviation Regulations) Part 25 are used. Through the comparison, the structural integrity of the bottom plate for the WIG craft is checked.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.24-33
• /
• 2018

DSM and orthoimage, which are representative results of UAV photogrammetry, are high-quality spatial information data and are widely used in various fields of spatial information industry in recent years. However, the UAV photogrammetry has a problem that the quality of the output of the UAV deteriorates due to the altitude of the UAV, the camera calibration, the weather conditions at the time of shooting, the performance of the GPS / IMU and the number of the ground reference points. The purpose of this study is to analyze the location accuracy of unmanned aerial photogrammetry according to the change of the number if ground control points. Experiments were made with fixed wing, and the shooting altitude was set at 130m and 260m. The number of ground reference points used was 9, 8, 5, and 4, respectively. Ten checkpoints were used. XY RMSE for orthoimage and Z RMSE for DSM were compared and analyzed. In addition, the resolution of the orthoimage was determined to affect the judgment of the operator in the verification of the planimetric position accuracy, and the visual resolution was analyzed using the Siemens star target. As a result of the analysis, the variation of the vertical position accuracy is larger than the variation of the planimetric position accuracy when the number of the ground reference points are different. Also The higher the flying height, the greater the effect of change of ground control points on position accuracy.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.180-188
• /
• 2007

In this paper the longitudinal control problem for the large WIG(wing-in-ground effect) craft is considered in the sense of the control augmentation system(CAS) derived by control surface of elevator. In order to achieve longitudinally stable systems, two modes of CAS are applied to the control systems which are pitch rate hold mode and pitch hold mode for steady flight. Since the employed CASs include the dynamic properties of the actuator time delay and the low pass filter, it provides the possible solution to be applicable to real systems. Nonlinear model simulations are fulfilled to investigate the effectiveness of the applied CASs with wind disturbance.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.57-68
• /
• 2000

The Power Augmented Ram(PAR) effect, which blows the down stream of the propellers into the underside of the wings and hence increases the pressure between the lower surface of the wings and the sea surface, is known significantly to enhance the performance of the WIG concept by reducing the take-off and landing speeds. The aerodynamic characteristics of a 20 passenger PARWIG are investigated by wind tunnel tests with the 1/20 scale model. The efflux of the forward mounted propellers are simulated by jet flows with a blower and duct system. The lift, drag, and pitch moment of the model with various ground clearances, angles of attack and flap angles are measured for the various jet velocities, jet nozzle angles, horizontal and vertical positions of the nozzle, and the nozzle diameters. The aerodynamic characteristics of the PARWIG due to these parametric changes are compared and pertinent discussions are included. It is shown that the proper use of the PAR can increase the lift coefficient of as much as up to 4.

• Composites Research
• /
• v.23 no.1
• /
• pp.44-50
• /
• 2010

In this paper, two different experiments, namely, salt water spray and salt water immersion, were performed to reproduce the contact of composites with the seawater for three kinds of woven fabric composite material systems which would be used for the WIG(wing in ground effect)craft. After aging 140 days in the salt water environment, material properties of carbon/epoxy and glass/epoxy composite such as tensile, compressive and shear stiffness and strength, and inter-laminar shear strength (ILSS) were measured. By comparing baseline material properties with degraded ones, the effects of the salt water environment on the composite mechanical properties were evaluated. From the experiments, it was confirmed that the difference in aging conditions had very small influence on composite properties. And it was found that tensile strength of carbon/epoxy composites showed little degradation, but much more degradation was observed in glass/epoxy composites. And large degradations on matrix dominant properties were observed. The salt water could damage the fiber-matrix interface, matrix properties and the glass fiber.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.911-916
• /
• 2012

The purpose of this study is to review and suggest coastal shipping policies for introduction of WIG craft into domenstic passenger shipping market. Two Korean companies are leading in the development of WIG craft as an innovative sea transportation vehicle, and it is awaiting for commercialization. WIG craft is expected to be commercialized from coastal passenger market and we used AHP method to investigate the major factors and its' priority for smooth market entry. The results shows that priorities are on the WIG craft legislation, dock installation and operation, port state control, and pilot hiring and training, craft maintenance, and ship's certification in order.