PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.
In order to satisfy the requirements of time reduction and cost saving for development of electronic control systems(ECU) in automotive industry, the applications of a standardized real-time operating system(RTOS) and a communication protocol to ECUs are increased. In this study, a body control module(BCM) that employs OSEK/VDX(open system and corresponding interfaces for automotive electronics/vehicle distributed executive) OS tour the RTOS and a controller area network(CAN) fur the communication protocol is designed, and the performances of the system are evaluated. The BCM controls doors, mirrors, and windows of the vehicle through the in-vehicle network. To identify all the transmitted and received control messages, a PC connected with the CAN communication protocol behaves as a CAN bus emulator. The control system based upon in-vehicle network improves the system stability and reduces the number of wiring harness. Furthermore it is easy to maintain and simple to add new features because the system is designed based on the standards of RTOS and communication protocol.
Recently the substation automation is actively researched at each country. Since the substation automation is an integrated system that consist of electrical, electronic and computer technologies, performance evaluation is very important to inspect the developed system's applicable possibility for real power system. Most studies are verified using computer simulation, because it is hard to apply them to real power systems. Therefore development of a substation simulator is necessary for the performance evaluation of many application systems such as operator aid system. This paper introduces a substation simulator. An intelligent fault diagnosis and restorative control expert system is also introduced UDP/IP is applied as a protocol for data transport between expert system and SC(station computer). As to the Graphic User Interface, C++ Language and Visual Basic is used in the Windows NT operating system together with four Pentium II systems.
Yhis paper describes a fault diagnosis simulation of the Real-Time Multiple Fault Dignosis System (RTMFDS) for forcasting faults in a system and deciding current machine state from signal information. Comparing with other diagnosis system for single fault,the system developed deals with multiple fault diagnosis,comprising two main parts. One is a remotesignal generating and transimission terminal and the other is a host system for fault diagnosis. Signal generator generate the random fault signal and the image information, and send this information to host. Host consists of various modules and agents such as Signal Processing Module(SPM) for sinal preprocessing, Performence Monotoring Module(PMM) for subsystem performance monitoring, Trigger Module(TM) for multi-triggering subsystem fault diagnosis, Subsystem Fault Diagnosis Agent(SFDA) for receiving trigger signal, formulating subsystem fault D\ulcornerB and initiating diagnosis, Fault Diagnosis Module(FDM) for simulating component fault with Hierarchical Artificial Neural Network (HANN), numerical models and Hofield network,Result Agent(RA) for receiving simulation result and sending to Treatment solver and Graphic Agent(GA). Each agent represents a separate process in UNIX operating system, information exchange and cooperation between agents was doen by IPC(Inter Process Communication : message queue, semaphore, signal, pipe). Numerical models are used to deseribe structure, function and behavior of total system, subsystems and their components. Hierarchical data structure for diagnosing the fault system is implemented by HANN. Signal generation and transmittion was performed on PC. As a host, SUN workstation with X-Windows(Motif)is used for graphic representation.
유비쿼터스 환경에서 지능형 서비스 로봇의 실시간성 기술은 QoS를 보장하기 위해서 필수 불가결한 요소이다. 본 논문에서는 지능형 서비스 로봇에 실시간성을 지원하는 실시간 프레임워크를 설계 및 구현한 내용을 기술한다. 실시간 스케줄링 서비스를 제공하는 실시간 프레임워크는 범용 운영체제를 기반으로 동작하며, 범용 운영체제에서 제공하는 스케줄러의 실시간성 미 지원 문제를 해결한다. 본 논문에서는 또한 실시간 로봇 애플리케이션에 QoS를 보장하기 위한 실시간 스케줄링 서비스를 제안한다. 제안된 실시간 프레임워크의 성능 평가를 위해 윈도우즈 운영체제 상에 구현하였다. 실험 결과를 통해 쓰레드의 응답시간 향상과 실시간 프레임워크 탑재에 따른 성능상의 오버 헤드가 $62{\mu}s$로 미미하다는 것을 알 수 있다.
리눅스는 핀란드 헬싱키 대학 리누스 토발즈(Linus Torvalds)에 의해 개발되었으며 마이크로소프트사의 윈도우와 경쟁자로 부각될 만큼 많은 발전을 해왔다. 현재 리눅스 사용 현황을 보면, IBM은 리눅스 탑재를 기본으로 하고 있으며 영국 정부는 데스크탑 운영체제로 리눅스 채택을 검토하고 있다. 튀니지는 국가 운영체제로 리눅스 운영체제를 채택하려는 움직임이 있고, 워크스테이션과 서버 시장의 강자인 썬(Sun Microsystems)도 리눅스 운영체제를 이용한 개발에 박차를 가하고 있다. 국내의 경우, 2002년에는 정부 차원에서 '리눅스 지원센터'가 설립되고 리눅스 활성화를 위해 '공개소프트웨어진흥법'이 제정되는 등 리눅스 지원정책이 범 정부적으로 추진된다. 이러한 이유로 리눅스 운영체제는 사회적으로나 국가적인 차원으로까지 사용성이 증대되는 시점이다. 따라서 전문인력 배출의 산실인 대학에서 리눅스 교육의 활성화 방안에 대한 논의가 공론화되어야 한다. 본 논문은 이러한 사회적 요구사항을 충족시키기 위해서 리눅스를 대학교육에 접목하고자 할 때 고려할 사항, 문제점 분석, 해결방안을 제시하는데 목적이 있다.
본 연구에서는 SfM (Structure from Motion) 기술을 기반으로 항공삼각측량을 수행하고 3차원 포인트 클라우드를 생성하며 정사모자이크를 제작할 수 있는 Agisoft Metashape의 병렬처리 성능을 평가하였다. SfM의 속성상 상호표정에 해당하는 Align photos와 3차원 포인트 클라우드를 생성하는 Build dense cloud가 대부분의 시간을 차지하는데, Metashape에서는 이러한 과정에서 CPU (Central Processing Unit)의 다중코어와 함께 GPU (Graphics Processing Unit)를 이용하여 병렬처리를 수행할 수 있다. 세 가지 병렬처리 방법(CPU only, GPU only, CPU + GPU)과 두 가지 운영체제(Windows, Linux)를 조합하여 총 여섯 가지 조건으로 대용량 무인기 영상으로부터 정사모자이크를 제작하였다. 아울러 사용자의 개입 없이 자동화된 방법으로 영상에서 지상기준점을 인식하여 항공삼각측량의 RMSE (Root Mean Square Error)를 측정함으로써 각 조건에 따른 결과의 일관성을 평가하였다. 4220만 화소의 무인기 영상 521장으로부터 정사모자이크를 제작한 결과, 본 연구에서 사용한 시스템에서는 CPU와 GPU의 조합이 가장 나은 성능을 나타내었고 모든 조건에서 Linux가 Windows보다 나은 성능을 나타내었다. 그러나 항공삼각측량의 RMSE를 측정한 결과, 각 설정에 따른 RMSE 값에서 오차 범위 안에서 미세한 차이가 나타났다. 따라서 Metashape는 운영체제 및 병렬처리 여부에 관계없이 동일한 결과가 도출되도록 개선할 여지가 있는 것으로 판단된다.
최근 각종 보안 침해 사고는 불특정 다수를 대상으로 발생하고 있으며, 이는 네트워크를 통한 정보의 공유가 가속화되면서 그 피해가 더욱 늘어나고 있다. 이러한 보안 침해 사고는 침입차단시스템, 침입탐지시스템, 가상사설망 등 정보보호시스템의 활용으로 최소화가 가능하지만, 이는 전문가적인 지식이 필요하며 일반 사용자가 운영하기가 쉽지 않다. 본 논문에서는 일반 사용자가 쉽게 사용할 수 있도록 파일 접근 제어 모듈을 설계 및 개발하였고, 이는 공격에 대한 탐지가 아닌 운영체제상에서 공격에 대한 차단할 수 있다. 본 논문에서 구현한 파일 접근 제어 모듈은 윈도우환경 뿐만 아니라 리눅스 환경에서도 적용할 수 있으며, 다중 사용자가 사용하는 운영체제에 따라 파일에 대한 접근 제어를 함으로써 파일에 대한 접근제어, 무결성, 부인 방지를 할 수 있다.
리눅스 운영체제는 데스크톱이나 서버뿐만 아니라 모바일 기기, 자동차, 임베디드 기기 등 다양한 분야로 영역을 넓혀가고 있고, 자유롭게 사용가능한 공개 소프트웨어라는 특징으로 인해 운영체제 부문에서 대부분 선두권을 차지하고 있다. 그러나 데스크톱 분야는 마이크로소프사의 윈도우가 장악하고 있고, 애플사의 Mac OS도 매니아층을 중심으로 점유율을 높이고 있으나 리눅스의 성장세는 답보 상태이다. 이러한 열세를 만회할 수 있는 중요한 요소로는 X 윈도 시스템을 손꼽을 수 있다. 아직까지 대부분의 리눅스 배포판이 전통적인 구조의 X.org 서버를 X 윈도 시스템으로 사용하는데, 무겁고 처리 속도도 느린 단점이 있다. 이를 대체하기 위해 Wayland라는 새로운 구조의 X 윈도 시스템이 등장하였다. Wayland는 임베디드나 모바일 기기에서 적합할 만큼 작고 가벼워서 데스크톱 분야뿐만 아니라 사물인터넷 관련 기기에도 탑재할 수 있다. Wayland의 등장과 더불어 시작된 X 윈도의 변화는 리눅스 대중화에 박차를 가할 것으로 판단된다.
Journal of information and communication convergence engineering
/
제10권1호
/
pp.61-65
/
2012
Many public organizations have been adopting and operating various servers. These servers run on Windows, Unix, and Linux operating systems that generally use less than 10% of their capacity. For migrating a public organization to cloud computing, we must first virtualize the server environment. This article proposes a strategy for server virtualization that the National IT Industry Promotion Agency (NIPA) has done and describes the effects of a public organization migrating to cloud computing. The NIPA Computer Center planned an effective virtualization migration on various servers. This project of virtualization migration was conducted with the existing policy of separate x86 servers and Unix servers. There are three popular approaches to server virtualization: a virtual machine model, a paravirtual machine model, and virtualization at the operating system layer. We selected a VMware solution that uses the virtual machine model. We selected servers for virtualization in the following manner. Servers were chosen that had the highest rate of service usage and CPU usage and had been operating for five years or more. However, we excluded servers that require 80% or greater rates of CPU usage. After adopting the server virtualization technique, we consolidated 32 servers into 3 servers. Virtualization is a technology that can provide benefits in these areas: server consolidation and optimization, infrastructure cost reduction and improved operational flexibility, and implementation of a dual computing environment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.