• Journal of Biosystems Engineering
• /
• 제20권2호
• /
• pp.162-172
• /
• 1995

The ventilation in greenhouse have been important for such as adjustment of temperature, supplying of the oxygen, prevention of the overhumidity, density adjustment of $CO_2$, discharge of harmfulness gas, etc. However, the general ventilation which had been used the quantitative control method in discharge of a property of air mechanism in greenhouse, and caused mainly in waste of the heating energy and growth obstacle of the vegetable. Therefore, this study was peformed to obtain more scientific ventilation method using by analysis and measurement of the isothermal lines according to opening of window ventilation in greenhouse, and the results are summarized as follows. 1. The ventilating amount was more influenced by rather opening amount of window than the ventilating time. 2. In window ventilation, the temperature in greenhouse was mostly changed within 5 minutes after ventilating not regard to the spot of opening, after about 10 minutes temperature became to equilibrium state under the respective ventilating conditions. 3. In opening of the skylight only, isothermal lines were complicated, therefore, a tall vegetable may be possible to damage by a cold-weather from the lower central port in greenhouse. 4. Isothermal lines were a tendency to simply in opening of a side window that may be more effective ventilation in kinds of the short vegetable. 5. In conditions of internal temperature>setting temperature>external temperature, a skylight can be suitable to open 10~20cm in order to the optimum ventilation in greenhouse. 6. In conditions of internal temperature>external temperature>setting temperature, opening of all the windows or both the side windows that can be suitable in order to obtain the optimum ventilation in greenhouse. 7. An effect of ventilation was the most excellent to open of all the windows or both the side windows, and it were also found orderly excellent to open of the side window and the skylight or the skylight only, to open of the side window only. 8. Temperature was varied as the equation of T=Tc+ (To-Tc)e-at, and the ranges of (a) values were limited within 0.34~0.68. 9. A variations of humidity were similar to that of temperature, s.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2573-2578
• /
• 2007

In order to investigate the vortex body frame interaction around the side mirror of a passenger car, velocity vector fields in the wake, pressure distributions and boundary layer flows over both the mirror surface and the mirror housing, have been measured by several experimental tools. It was resulted that only within an half downstream distance of the mirror span there appears the recirculation zone, and also found that vortex trail towards to the driver side window between A and B pillars, making the acoustic noise and vibration. Wake vortex rolls up after this recirculating zone and makes the trail of the vortex center towards the driver side window, which was also confirmed by measurements of wake velocity vectors in the vertical sections of the trail and visualization over the side mirror surfaces as well. It was also observed that total pressure distribution over the mirror surface has the minimum peak near the lower tip region which can be considered as the origin of the vortex center. It can be concluded that the geometrical modification of the lower tip and the upper root area of the mirror housing is the key to control the wake vortex.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.366-369
• /
• 2006

Multi Housing design has not considered the remodeling even at the beginning of the construction. This severely hindered systematic maintenance, providing fundamental causes of consuming society. In general, in about 20 years when the buildings become too old, they are brought down or removed with a trail of waste left behind. In addition, since the current remodeling or future remodeling type is a general remodeling that leaves only a frame, some question the role of the remodeling as a solution to the reconstruction from economically and environmentally efficient aspects. This study intends to find a solution for long-life span multi-family housing design, promoting sequential remodeling by stating the life cycle of components. Problems were identified by analyzing joints, design and construction of multi-family housing based on the previous researches. Conclusion from characterization of the design plan according to joint parts can be summarized as the following firstly, the problem of the wet was seen in joints between the structure and a finishing materials and ones between separate finishing materials. Secondly, the problem of overlap was frequently seen in joints between the structure and a door/window, ones between a door/window and a finishing materials, and ones between a finishing materials and an electrical/mechanical device.

• The Journal of Asian Finance, Economics and Business
• /
• 제3권3호
• /
• pp.27-37
• /
• 2016

This study uses an endogenous economic growth model to determine the long run relationship between trade openness and economic growth in China by using the data 1975-2009.It contributes to the literature by developing trade openness index. An autoregressive distributed lag approach to cointegration and rolling regression method are employed. This study tests the link between trade openness and economic growth in the case of China by using the framework of endogenous economic growth model. This study also employs the rolling window regression method in order to examine the stability of coefficients throughout the sample span. The autoregressive distributed lag (ARDL) cointegration technique and rolling regression method are used. The empirical findings indicate that trade openness (i.e. Both individual trade indicator and composite trade openness index) are positively related to economic growth in the long run and short run. Our results indicate that trade openness as measured by individual trade indicator and composite trade openness index are positively related to economic growth in the long run and short run. However, results from the rolling window suggest that trade openness is negatively linked to economic growth only for a number of years.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.529-535
• /
• 2005

This paper presents a system identification (SI) scheme in time domain using measured acceleration data. The error function is defined as the time integral of the least squared errors between the measured acceleration and the calculated acceleration by a mathematical model. Damping parameters as well as stiffness properties of a structure are considered as system parameters. The structural damping is modeled by the Rayleigh damping. A new regularization function defined by the L1-norm of the first derivative of system parameters with respect to time is proposed to alleviate the ill-posed characteristics of inverse problems and to accommodate discontinuities of system parameters in time. The time window concept is proposed to trace variation of system parameters in time. Numerical simulation study is performed through a two-span continuous truss subject to ground motion.

• 생물환경조절학회지
• /
• 제20권2호
• /
• pp.78-82
• /
• 2011

온실의 환기설계 기준 설정 및 단동 플라스틱 온실의 원형 천창 설치 가이드라인 제정을 위한 기초자료를 제공할 목적으로 천창이 설치된 토마토 재배 단동 온실에서 환기실험을 통하여 자연환기 성능을 분석하고, 열평형 모델을 이용하여 온실 재배 토마토의 증발 추정하였다. 직경 60cm의 원형 천창을 지붕의 중앙에 8m 간격으로 설치한 단동온실의 자연환기 성능을 실험한 결과 환기회수는 분당 0.02~0.32회(평균 0.17회 $min^{-1}$)의 범위를 보여 상당히 낮은 것으로 나타났다. 그러나 상업용 온실의 권장환기율과 비교하면 6m 간격으로 설치할 경우에는 봄이나 가을철에 필요한 환기량을 충족할 수 있을 것으로 판단되며, 여름철 권장환기를 위해서는 2m 정도의 간격으로 설치한 해야만 가능할 것으로 판단되므로 광투과를 저해하지 않으면서 지붕의 개구면적을 확대할 수 있는 방안을 찾아야 할 것으로 생각된다. 실험에 사용한 단동 온실은 인접 동 간격이 1.2m에 불과한 밀집된 단지 내에 위치하고 있어서 측창 주변의 외부 풍속이 최대 $0.9m{\cdot}s^{-1}$(평균 $0.4m{\cdot}s^{-1}$에 불과하고 풍력에 의한 환기효과를 기대하기가 어려웠다. 환기량과 풍속 및 실내외 온도차와의 관계를 비교 분석해 본 결과 중력환기가 우세함을 확인 할 수 있었다. 본 환기실험 자료를 온실의 환기설계를 위한 열평형모델에 적용하여 증발산계수를 추정해 본 결과 0.39~0.85의 범위(평균 0.62)를 보였고, 다른 연구자들이 제시하는 일반적인 온실의 설계 권장 값과 유사한 경향을 나타냈다. 따라서 토마토 재배 단동 플라스틱 온실의 환기설계에서 증발산계수는 0.6 정도를 사용하면 적당할 것으로 판단된다.

• 정보처리학회논문지D
• /
• 제11D권4호
• /
• pp.983-990
• /
• 2004

누적밀도 히스토그램은 사각형 객체의 네 점에 대응하는 4개의 서브 히스토그램을 유지함으로써 사각형 객체가 여러 버켓에 걸쳐질 경우 발생하는 다중 계산 문제를 해결하고 있다. 이 기법은 빠른 추정시간과 정확한 결과를 제공하고 있지만, 질의 윈도우가 그리드 셀의 경계와 일치해야 한다는 제약사항을 기반으로 수행하므로, 실제 응용에 적용시 많은 에러를 초래하게 된다. 따라서, 이 논문에서는 기존 누적밀도 히스토그램에서 질의 윈도우의 제약사항에 관한 영향을 줄이기 위해, 두가지 확률모델을 기반으로 일반화된 누적밀도 히스토그램을 사용한 선택율 추정 기법을 제안하였다. 제안된 두가지 확률 모델은 \circled1질의 영역 비율을 고려한 확률모델과, \circled2교차 영역 정보를 고려한 확률모델이다. 우리는 실제 데이터 셋을 사용하여 제안된 기법을 실험하였다 실험 결과는 이 논문에서 제안된 기법이 기존의 다른 선택율 추정 기법보다 성능이 뛰어남을 보여주고 있다 더구나, 교차 영역 정보를 기반으로 하는 확률모델의 경우 20% 질의 윈도우에서 5% 미만의 낮은 에러율을 보였다. 이 논문에서 제안된 기법은 사각형 객체의 공간 범위 질의의 선택율을 정확하게 추정하는데 사용될 수 있다.

• 대한산업공학회지
• /
• 제40권3호
• /
• pp.325-332
• /
• 2014

High cognitive workload decreases a driver's ability of judgement and response in traffic situation and could result in a traffic accident. Electrocardiography (ECG) has been used for evaluation of drivers' cognitive workload; however, individual differences in ECG response corresponding to cognitive workload have not been fully considered. The present study developed an evaluation method of individual driver's cognitive workload based on ECG data, and evaluated its usefulness through an experiment in a driving simulator. The evaluation method developed by the present study determined the optimal ECG evaluation condition for individual participant by analysis of area under the receiver operating characteristic curve (AUC) for various conditions (total number of conditions = 144) in terms of four aspects (ECG measure, window span, update rate, and workload level). AUC analysis on the various conditions showed that the optimal ECG evaluation condition for each participant was significantly different. In addition, the optimal ECG evaluation condition could accurately detect changes in cognitive workload for 47% of the total participants (n = 15). The evaluation method proposed in the present study can be utilized in the evaluation of individual driver's cognitive workload for an intelligent vehicle.

• 생물환경조절학회지
• /
• 제24권4호
• /
• pp.308-316
• /
• 2015

최근 관심이 집중되고 있는 스마트온실의 기술적용 실태와 문제점을 파악하고 이를 토대로 단동온실의 ICT 기술적용 장애요인 극복과 생산성을 제고하기 위하여 실험을 수행하였다. 자동화 시설의 도입 장애요인으로는 시설비 부담(24%)이 높았으며, 설치업체 사후관리 미흡(19%), 잦은 고장(16%), 관리기술 미흡(15%), 기능 미흡(13%), 소득향상기여 미흡(12%) 순이었다. ICT 도입필요성은 노동력절감(15%)이 가장 높았다. 자동화 온실에서 문제가 발생되는 부분은 온실구조, 구동기제어, 복합환경제어기, 센서기술이 각 14%로 비슷하였고, 원격제어기술 13%, 작물관리기술 12%, 에너지절감기술 10%, 소프트웨어활용 8%이었다. 온실구조 측면에서의 문제점은 천창개선이 18%로 가장 많았다. 효율적인 온도 및 환기 제어를 위해 농촌진흥청 고시 10-단동-7형 온실에 랙피니언 천창을 추가하였으며, 지붕형태를 복숭아형으로 변경하였다. 온실내 환경의 균일성을 위해 공기 유동팬은 6대를 설치하도록 하되 필요에 따라 증설 가능하도록 하였으며, 에너지 절약을 위해 1, 2중은 두께 0.1mm필름을 사용하고 3중은 5겹보온커튼을 설치하였다. CFD 유동해석 결과, 측창이 열린조건에서는 풍상 방향의 평균 유속이 빠르고 온도가 낮았으며, 풍하 방향으로 멀어 질수록 평균 유속이 점차 느려지고 온도는 높게 나타났다. 반면, 측창이 닫힌조건에서는 평균 유속이 낮으며, 구역별로 큰 편차는 없었다. 다만 풍상 풍하의 천창이 모두 열린 조건에 비하여 풍하 방향의 천창만 열린조건이 영역별 평균 유속에서 더 높은 값을 보였다. 측창을 닫은 조건에서는 외기의 유동이 아닌 온실 내 설치된 환기용 유동팬에 의해 유속이 발생하며 외부 환기가 없는 조건에서 유동팬에 의한 순환은 실내 전체 공간의 유동 편차를 줄여 줄 수는 있지만 전체적인 온도에는 영향을 미치지 못하였다. 저측고의 영역별 평균 온도는 고측고보다 균일하게 나타났다. 겨울철 3중 다겹보온커튼 여닫음에 관계없이 유동팬 근처에서 유속이 높고 유동팬에서 멀어지면 유속이 거의 없는 것으로 나타났다. 또한, 시간경과에 따른 평균 온도는 3중다겹보온커튼 열림상태에서 약 2시간 후에 외부온도와 같아졌으나 닫힘상태에서는 5시간 이후에 외부온도와 같아져, 3중 다겹보온커튼의 보온효과가 뚜렷하였다. 같은 조건에서 열용량의 차이로 인해 저측고 온실이 고측고 온실에 비하여 온도 하강 속도가 빨랐다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권3호
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.