• Wind and Structures
• /
• 제32권4호
• /
• pp.393-403
• /
• 2021

A comprehensive knowledge of the wind flow in hilly terrains is of great interest in many engineering applications, be it wind energy distribution for suitable site selection for wind farms, pollution dispersion, forest fire propagation or agrometerological studies. Several researchers have shown that wind flow over a hilly terrain may be significantly different when compared with the wind flow over a flat terrain. Complex hilly terrains may alter the wind speed to a great extent. Therefore, this effect of terrain must be properly assessed by designers and planners to arrive at a proper wind flow distribution. This paper reviews the work done in this area over the past three decades. Wind flow over two-dimensional hills and two-dimensional escarpments investigated in wind tunnels by various researchers is presented in this paper.

• Wind and Structures
• /
• 제32권2호
• /
• pp.115-126
• /
• 2021

The snow cornice mass on the formation zone had triggered avalanches which led to the loss of human life and property. Snow cornice is formed due to flow separation on the leeward side. Effect of lee slope is more prominent in the formation of snow cornices as compared to the windward slope. The analysis of wind flow pattern has been carried out to evaluate the performance of a jet roof. Computational Fluid Dynamics (CFD) analysis of wind flow over a 2D hill model was carried out using RNG based k-∈ turbulence models available in ANSYS Fluent. Effect of varying leeward hill slope (1:2 to 1:6) on flow separation for the given windward slope was observed and a critical slope of 1:4 was found at which the separation zone ceased to exist. The modification of wind flow over a hill due to the installation of jet roof was simulated. It was observed that jet roof had significantly modified the wind flow pattern around hill ridgeline and ultimately snow cornice formation had mitigated. The results of the wind flow pattern were validated with the wind data collected at the experimental site, Banihal Top (Jammu and Kashmir, India). The wind flow simulation over the hill and mitigation of cornice formation by the jet roof has been explained in the present paper.

• Wind and Structures
• /
• 제24권2호
• /
• pp.171-184
• /
• 2017

The present study provides a deeper understanding of the flow fields of a full-scale railway wind barriers by means of a wind tunnel test. First, the drag forces of the three wind barriers were measured using a force sensor, and the drag force coefficients were compared with a similar scale model. On this basis, the mean wind velocity and turbulence upwind and downwind of the wind barriers were measured. The effects of pore size and opening forms of the wind barrier were discussed. The results show that the test of the scaled wind barrier model may be unsafe, and it is suitable to adopt the full-scale wind barrier model. The pore size and the opening forms of wind barriers have a slight influence on the flow fields upwind of the wind barrier but have some influences on the flow fields and power spectra downwind of the wind barrier. The smaller pore size generates a lower turbulence density and value of the power spectrum near the wind barrier, and the porous wind barriers clearly provide better shelter than the bar-type wind barriers.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.79-89
• /
• 2012

The objectives of this paper were to evaluate the wind flow behind the livestock ventilation fan for small-scale wind power generation and to make flow profiles of imaginary ventilation fan for future simulation works. The field experiments using typical 50-inch fan indicated that the wind flow behind the ventilation fan had a good possibility of power generation with its high and steady wind speeds up to a distance of 2 m. The expected electricity yield was almost 101~369 W with a small (0.8 m radius) wind turbine. The decline of ventilation fan performance caused by the obstacle was also not significant with about 4 % from a distance of 2 m. The flow profiles for the computational fluid dynamics (CFD) simulation was created by combining the direction vectors analyzed from tuft visualization test and the flow predicted by the rotating fan modeling. The flow profiles are expected to provide an efficient saving of computational time and cost to design a better wind turbine system in future works.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.29-35
• /
• 2007

In accordance with Madrid and Kyoto Protocols, a 10kw wind turbine installed about 625m away from the King Sejong Station in the Antarctica has been in operation successfully. The current location of the wind turbine has different geographic surroundings from the previous candidate site considered in 2005 and that makes re-evaluation of wind resource at the current site including geographic effects necessary. Especially, strong wind flow derived by steep and complex terrain is dominant in the Antarctica so that computational flow analysis is required. The wind rose measured at the previous and current installation location are identical with strong meteorological correlation but prevailing directions of wind power density are different because of local wind acceleration due to complex terrain. Numerical analysis explains which effects brings this discordance between the two sites, and a design guideline required for additional wind turbine installation has been secured.

• 한국소음진동공학회논문집
• /
• 제23권6호
• /
• pp.502-511
• /
• 2013

Noise performance of small wind turbines is critical since these are generally installed near the community. In this study, flow noise characteristics of Savonius wind turbines are numerically investigated. Flow field around the turbine are computed by solving unsteady RANS equation using CFD techniques and the radiated noise are predicted by applying acoustic analogy to the computed flow data. Parametric study is then carried out to investigate the effects of operating conditions and geometric design factors of the Savonius wind turbine. Tonal noise components with higher harmonic frequency than the BPF are identified in the predicted noise spectra from a Savonius wind turbine. The end-plates and helical blades are shown to reduce overall noise levels. These results can be used to design low-noise Savonius wind turbines.

• 한국지리정보학회지
• /
• 제20권2호
• /
• pp.75-88
• /
• 2017

본 연구에서는 대구시를 사례로 도시내에서의 공간지형적 특성에 따른 국지적 바람유동성을 분석하였다. 분석은 3단계로 이루어졌는데, 1단계에서는 지역풍향(종관풍)과 국지적 바람유동간의 기상학적 관계를 비교하였다. 2단계에서는 도심지역과 교외지역으로 구분하여 국지적 바람유동의 변화를 비교 분석하였다. 3단계에서는 KLAM_21을 활용하여 국지적 바람유동과 도시공간전체의 바람길 형성 및 유동과의 공간적 관계에 대하여 비교 검증하였다. 연구결과를 요약하면 다음과 같다. 첫째, 지역의 대표풍향(종관풍)과 국지적 바람유동 사이에는 기상학적으로 상관성이 낮았다. 둘째, 도심지역 5개와 교외지역 2개 측정지점에서의 국지적 바람유동에 대한 관측결과에서는 지점별로 다양한 풍향을 나타내었다. 이는 측정지점 인근에서의 공간지형적 특성이 국지적 바람유동에 영향을 미치고 있음을 보여주고 있다. 셋째, KLAM_21을 활용하여 분석한 결과를 AWS 측정자료와 비교 검증한 결과 수치모델링분석의 신뢰도를 확인할 수 있었다. 본 연구를 통해 검증한 도시의 국지적 바람유동은 도시열섬현상의 개선을 위한 공간적 기능과 역할을 할 수 있는 요소가 될것으로 판단된다. 즉, 도시계획 수립시 공간지형적 특성에 따른 국지적 바람유동을 체계적으로 파악하고 이를 도시열섬발생지역과 공간적으로 연계될 수 있는 계획적 기법을 적용한다면 도시열섬 현상을 효과적이며 지속적으로 개선할 수 있을 것으로 기대된다.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.287-300
• /
• 2022

Unconventional structures are getting more popular in recent days. Large-span roofs are used for many structures, such as airports, stadiums, and conventional halls. Identifying the pressure distribution and wind load acting on those structures is essential. This paper offers a collaborative study of computational fluid dynamics (CFD) simulations and wind tunnel tests for assessing wind pressure distribution for a building with a combined slender curved roof. The hybrid turbulence model, Improved Delayed Detached Eddy Simulation (IDDES), simulates the open terrain turbulent flow field. The wind-induced local pressure coefficients on complex roof structures and the turbulent flow field around the structure were thus calculated based upon open terrain wind flow simulated with the FLUENT software. Local pressure measurements were investigated in a boundary layer wind tunnel simultaneous to the simulation to determine the pressure coefficient distributions. The results predicted by CFD were found to be consistent with the wind tunnel test results. The comparative study validated that the recommended IDDES model and the vortex method associated with CFD simulation are suitable tools for structural engineers to evaluate wind effects on long-span complex roofs and plan irregular buildings during the design stage.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.387-390
• /
• 2007

Recently the diameter of the 5MW wind turbine reaches 126m, and the tower height is nearly the same with the wind turbine diameter. The blade will experience periodic inflow oscillation due to blade rotation inside the ground shear flow region, that is, the inflow velocity is maximum at uppermost position and minimum at lowermost position. In this study we compare the aerodynamic data between two inflow conditions, i.e, uniform flow and normal wind profile. From the computed results all of the relative errors for oscillating amplitudes increased due to the ground shear flow effect. Especially My at hub and $F_x$, $M_y$, $M_z$ at LSS increased enormously. It turns out that the aerodynamic analysis including the ground shear flow effect must be considered for fatigue load analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.376-377
• /
• 2007

In accordance with Madrid and Kyoto Protocols, a 10kW wind turbine installed about 625m away from the King Sejong Station in the Antarctica has been in operation successfully. The current location of the wind turbine has different geographic surroundings from the previous candidate site considered in 2005 and that makes re-evaluation of wind resource at the current site including geographic effects necessary. Especially, strong wind flow derived by steep and complex terrain is dominant in the Antarctica so that computational flow analysis is required. The wind rose measured at the previous and current installation location are identical with strong meteorological correlation but prevailing directions of wind power density are different because of local wind acceleration due to complex terrain. Numerical analysis explains which effects brings this discordance between the two sites, and a design guideline required for additional wind turbine installation has been secured.