• Fisheries and Aquatic Sciences
• /
• 제21권4호
• /
• pp.9.1-9.7
• /
• 2018

To establish a comprehensive management strategy, as part of the optimization of cultural practice for an oyster rack culture system, we used a numerical model to estimate the primary production in the waters on the eastern coast of Wando island, South Korea. The estimated primary production ranged from 17.12 to $1052.55mgC\;m^{-2}day^{-1}$ ($204.22{\pm}224.75mgC\;m^{-2}day^{-1}$ in average). Except for the times of peak phytoplankton blooms, the estimated primary production (PP) was consistently under $200mgC\;m^{-2}day^{-1}$, which is more similar to the value of PP measured off the western coast of South Korea than the southern coast. No clear relationship was observed between nitrogen content and rainfall with the exception of heavy rainfall events, indicating that precipitation might not be the main source of nutrients in these waters. No clear influence was observed from Doam tidal discharge, located 24 km north from these waters due to main tide comes in this area from the channel between Gunwe-myeon in Wando island and Pukpyeong-myeon in Haenam-gun. Because of the shallow water depth and strong tidal current, resuspension of sediments, which causes an input of nitrogen into the system, could be easily caused by even mild wind and the infrequent passing of ships. Microscopic examination of the phytoplankton composition showed additional contribution of benthic species such as Paralia sulcata into the waters, which increase the productivity of oyster farms in the waters. The availability of nitrate and phosphate for primary production was temporarily limited throughout most of the spring and autumn blooming season.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.183-185
• /
• 2015

최근 기계학습기반 빅데이터 분석이 많은 주목을 받으며 축산분야에도 다양한 기계학습 방안들이 적용되고 있다. 많은 양의 생체데이터와 환경데이터에 기계학습기법을 적용하여 분석함으로써 이전에는 발견하지 못했던 새로운 사실들을 밝혀낼 수 있다. 본 연구에서는 실험돈사에서 수집된 데이터를 기반으로 비육돈의 비율일당증체를 예측하는 방안에 대해서 다루었다. 비율일당증체 예측을 위해서 매일 측정된 온도/습도/이산화탄소/풍속의 일평균/일최소/일최대 데이터(환경데이터)과 비율일당증체(생체데이터)를 이용하였고, 트리기반 알고리즘을 사용하여 비율일당증체 예측수식을 도출하였다. 이를 통해 평균 온도가 비율일당증체에 가장 큰 영향을 미치는 요소인 것을 보였다. 본 연구의 결과는 각 양돈농가에서 비육돈의 성장을 예측하는데 유용하게 활용될 수 있을 것이다.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1873-1878
• /
• 2017

Both the introduction of the Renewable Energy Portfolio Standard (RPS) system into the electric energy market in 2012 and a decrease in the cost of constructing photovoltaic (PV) power plants have been increasing the number of MW PV plants in South Korea. Jeju Island is located at the center of three nations, South Korea, China and Japan, and its provincial government declared in 2012 that the island will be a clean region where greenhouse gases are not emitted by 2030. The Jeju provincial government is now doing its best to install PV plants and wind farms to realize a carbon-free island. In this study we investigated contribution of MW PV plants to the power of the electric grid during summer peak times on Jeju Island. Mt. Halla the highest mountain in South Korea, is located at the center of Jeju Island, and we divided the island into four regions and carried out analyses of a total of 24 PV plants. The average contribution of the PV plants in the respective region to electric power of Jeju Island during summer peak times was investigated and compared with those of the other regions. The best average contribution during the 12.5% maximum load period was obtained from the PV plants in the western region, and the value was 33% during 2015 and 2016.

• 농업과학연구
• /
• 제47권4호
• /
• pp.867-884
• /
• 2020

Trypoxylus dichotomus is highly utilized in the domestic insect industry and bred at many farms nationwide. Recently, the number of farmers has been increasing due to the expansion of its use in food and medicine. However, the traditional breeding methods have high economic costs, which include relatively large breeding boxes, large amounts of sawdust and a 2 to 1 ratio (or higher) of female to male. Thus, it is essential to develop a cost-effective breeding method. In this study, a breeding cage with a partition was designed and used to investigate the reproduction rate of T. dichotomus with only a single pair of male and female insect. According to the investigation, the average number of eggs laid in the un-partitioned breeding cage was 93.6, and 121.3 eggs were laid in the partitioned breeding cage. This result shows that T. dichotomus lays more eggs in the partitioned breeding cage rather than in the un-partitioned breeding cage. In addition, it was found that T. dichotomus tends to lay more eggs in compressed sawdust, which was harder than the common fermented sawdust. Through a wind-tunnel assay, it was shown that the ovipositing female recognizes the eggs and avoids them to disperse their eggs elsewhere. These results indicate that the partitioned breeding cage may increase the hardness of the sawdust, restrict the adult's movement and provide a new place for oviposition for the female, and therefore results in an increased reproduction rate with less cost.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.334-341
• /
• 2021

The fishery compensation by marine spatial planning such as routeing of ships and offshore wind farms is required objective data on whether fishing vessels are engaged in a target area. There has still been no research that calculated the number of fishing operation days scientifically. This study proposes a novel method for calculating the number of fishing operation days using the fishing trajectory data when investigating fishery compensation in marine spatial planning areas. It was calculated by multiplying the average reporting interval of trajectory data, the number of collected data, the status weighting factor, and the weighting factor for fishery compensation according to the location of each fishing vessel. In particular, the number of fishing operation days for the compensation of driftnet fishery was considered the daily average number of large vessels from the port and the fishery loss hours for avoiding collisions with them. The target area for applying the proposed method is the routeing area of ships of Jeju outer port. The yearly average fishing operation days were calculated from three years of data from 2017 to 2019. As a result of the study, the yearly average fishing operation days for the compensation of each fishing village fraternity varied from 0.0 to 39.0 days. The proposed method can be used for fishery compensation as an objective indicator in various marine spatial planning areas.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.69-72
• /
• 2022

This paper actually investigates the load on major large-scale buildings in the downtown area, examines the economic feasibility of installing PV and ESS in a microgrid target building, and evaluates whether an electric vehicle capable of V2G through two buildings is effective as an economical analysis program (HOMER) was analyzed using. It is economical to install a mixture of ESS rather than using the whole PV, and it is shown that if there is an electric vehicle using the V2G function of EV, there is an economic effect to replace the PV. So that Incentives and policies are needed to replace a large area of PV and utilize the existing parking lot to lead EV as a resource of the microgrid. Currently, P2X technology that stores power as ESS or converts it to other energy to control when surplus renewable energy occurs in large-capacity solar power plants and wind farms, etc. This is being applied, and efforts are being made to maintain the stability of the system through the management of surplus power, such as replacing thermal energy through a heat pump. Due to the increase in electric vehicles, which were recognized only as a means of transportation, technologies for using electric vehicles are developing. Accordingly, existing gas stations do not only supply traditional chemical fuels, but electricity, and super stations that also produce electricity have appeared. Super Station is a new concept power plant that can produce and store electricity using solar power, ESS, V2G, and P2G. To take advantage of this, research on an urban microgrid that forms an independent system by tying a large building and several buildings together and supplies power through a super station around the microgrid is in full swing.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• 해양환경안전학회지
• /
• 제22권6호
• /
• pp.731-737
• /
• 2016

경상북도 구룡포 해역에서 하계 냉수 발생 특성과 어류 폐사를 유발하는 냉수대 강도를 파악하고자 2007년 8~11월 멍게양식장에 수온로거를 설치하여 수층별 수온을 측정하였으며, 2015년과 2016년은 국립수산과학원 실시간어장정보시스템의 표층수온 자료를 이용하였다. 동해 남부해역의 냉수대 발생 원리와 부합하게 남~남서풍이 강하게 불 때 용승으로 표층수온이 급격히 하강하였으며(2007년 8월 하순, 9월 20~22일, 2015년 7월 13~15일), 반대로 북~북동풍이 우세할 때 저층수온이 급상승하는(2007년 9월 5~7일, 9월 16~18일) 것으로 나타났다. 그 외에도 7~8월 구룡포 해역에 나타나는 약한 강도의 표층수온의 하강과 상승은 바람 방향과 밀접한 관계가 있는 것으로 나타났다. 구룡포 해역에서 최대풍속이 5 m/s 이상인 남~남서풍이 최소 이틀 이상 유지되면 표층수온이 약 $10^{\circ}C$ 이하로 하강하는 강한 냉수대가 발생하고 이로 인해 어류 폐사가 발생하는 것으로 파악되었다. 이를 바탕으로 포항기상대의 최대풍속과 최대풍속 풍향을 이용하여 냉수발생지수(Cold Water Index)를 정의하고 계산한 결과, $CWI_{2d}$(CWI 2일 평균)가 100 이상일 때 어류 폐사가 주로 발생하였으며, $CWI_{4d}$(CWI 4일 평균)는 7~8월 구룡포 표층수온과 높은 음의 상관성을 나타내었다($R^2=0.5$). 2007년 10월 30 m 수층의 수온 일변화($7{\sim}23^{\circ}C$)는 조석변화와 일치하는 주기와 스펙트럼을 보였으며, 이는 북한한류수 영향인 것으로 파악된다. 이와 같이 조석과 북한한류수로 인한 일변화가 어류 가 두리가 설치된 수심에도 영향을 미친다면 어업 피해로 이어질 수 있으므로 정밀한 조사가 필요할 것으로 생각된다.

• 생물환경조절학회지
• /
• 제29권1호
• /
• pp.36-42
• /
• 2020

본 연구에서는 국내에 가장 많이 보급되어 있는 1-2W 모델 연동온실에 대한 온실 규격 및 환기창 형태 실태 조사를 수행하고, 이를 바탕으로 연동온실의 천창 형태에 따른 유동 특성을 분석하기 위해 수치해석을 수행하여 자연환기효과를 분석하고자 하였다. 온실 실태조사 대상농가의 환기창면적 비율은 평균10%로 자연환기를 위한 시설면적 대비 환기창 면적 설계가 부족한 것으로 나타나 환기창 개선이 필요할 것으로 판단된다. 연동 온실의 천창 형태별 자연환기를 해석 및 분석한 결과, 온실 내 작물위치의 온도 분포 및 내외부 온도차는 몽골식 천창 온실에서 가장 낮고 외몽골식 천창 온실에서 가장 높게 나타났으나 추후 풍하중에 의한 구조적인 안전성을 평가해야할 것으로 판단된다.

• Current Research on Agriculture and Life Sciences
• /
• 제31권2호
• /
• pp.131-138
• /
• 2013

농용무인 헬리콥터는 벼농사는 물론 전작, 과수 등 소규모 필지의 정밀방제에 이용되고 있으며 농작업의 새로운 패러다임으로 자리 잡고 있다. 본 연구의목적은 농용헬리콥터의 비상시퀀스에서 정지비행 중 측풍에 의해서 비상착륙자리를 이탈하지 않고 위치를 유지하는 편류제어 모듈과 알고리즘의 성능을 평가하는데 있다. 편류제어의 목적은 비상착륙과 연동되어있는데, 비상조건에 도달하게 되면 호버링을 하면서 비상대처 알고리즘이 작동하게 된다. 그러나 관성 제어는 등속운동에서 기체의 움직임을 감지하지 못하게 되고 측풍에 의하여 비상지점으로부터 편류를 하게 되어 착륙 목표지점으로부터 멀어질 수 있다. GPS 모듈을 기초로 개발한 편류제어모듈을 시험하였다. 알고리즘 및 실효성을 고려하여 5 m 직경 내에 위치를 벗어나지 않는지에 대한 기준을 적용하였다. 초기에는 2~4m/s의 측풍 교란에 대하여 과민하게 반응하였지만 이후 5 m 직경 내에서 위치를 벗어나지 않고 자세 및 요의 방향을 유지 하였다. 목도의 관찰에서는 전후좌우 흔들림을 인지하기 어려운 정도이지만, 데이터에서 보인 편위는 GPS 수신기의 특성에 기인하는 것으로 판단한다. 이와 같은 편류제어는 비상착륙이나 호버링을 유지하려 할 때 의도하지 않는 편류를 제어하는데 사용될 수 있다.