• Journal of Information Processing Systems
• /
• 제11권1호
• /
• pp.116-124
• /
• 2015

Smart grids propose new solutions for electricity consumers as a means to help them use energy in an efficient way. In this paper, we consider the demand-side management issue that exists for a group of consumers (houses) that are equipped with renewable energy (wind turbines) and storage units (battery), and we try to find the optimal scheduling for their home appliances, in order to reduce their electricity bills. Our simulation results prove the effectiveness of our approach, as they show a significant reduction in electricity costs when using renewable energy and battery storage.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.65-68
• /
• 2012

본 연구에서는 XFOIL을 사용하여 설계된 30% 두께를 가지며 팁에서의 두께가 코드의 1.5%인 풍력터빈용 에어포일의 공력 특성을 해석하였다. 받음각에 따른 양력 항력 곡선 및 양항비를 XFOIL에서 얻어낸 결과와 EDISON_CFD 해석 결과를 상호 비교 하였다. EDISON_CFD에서의 해석을 위한 격자의 형태를 격자균일성을 생각하여 큰 타원과 작은 타원을 합쳐 만들었다. 수치 기법으로 Roe의 FDS를 선택하여 데이터를 수집하였다. 그 결과로 나타낸 압력계수와 양항비 그래프를 보면 선형 구간에서 양력은 XFOIL 해석 결과와 잘 일치하는 결과를 보여주었다. 그러나 항력에서 약1.5배 정도 EDISON_CFD의 결과가 크게 나옴으로써 양항비의 차이를 보이는 것으로 나타났다. 실속이후에서는 XFOIL의 신뢰도가 떨어지는 경향이 있어 특히 실속이후에서는 CFD의 해석결과가 필요한 것으로 보인다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.101-112
• /
• 2015

Renewable energy resources play an important part in the world's future. Renewable energy sources have the following components: biomass, geothermal, solar thermal, directs solar, wind, tidal and hydropower. Hydropower is still the most efficient way to generate electricity worldwide. Hydropower projects can contribute as a cheap energy source, as well to encourage the development of small industries across a wide range of new technology; furthermore hydropower systems use the energy in flowing and falling water to produce electricity or mechanical energy. Hydropower systems are classified as large, medium, small, mini and micro according to their installed power generation capacity, as do the following components: water turbines, control mechanisms and electrical transmissions. In this article a review of small hydropower systems has been done on the principles surrounding the fundamentals of hydraulic engineering, the fundamentals of hydrology, identification of sites and economic analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.88-90
• /
• 2008

본 논문은 이중여자 유도형(DFIG) 풍력발전 시스템에서 유효전력과 무효전력을 직접적으로 제어하기 위해 가변구조제어의 일종인 스위칭 이득기반의 선형궤환(LFSG)제어기법을 제시한다. 개조된 직접전력제어기법 (DPC)과 공간벡터변조방식(SVM)은 제안하는 제어기법을 실현하기 위해 이용된다. 개조된 직접전력제어원리를 이용해서 설계된 LFSG제어기법은 널리 사용되고 있는 자속기준제어기법(FOC)에 비해서 간단한 제어구조로 강인성과 빠른 응답특성을 보인다. 시뮬레이션결과는 제안하는 제어전략의 타당성과 강인성을 확인해준다.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1168-1179
• /
• 2015

This paper presents voltage and frequency control methods for a stand-alone Gasa Island Microgrid in South Korea that can be fully energized by renewable energy resources such as photovoltaic systems and wind turbines. To mitigate the variations of the output of renewable energy resources and supply more reliable electricity to customers, battery energy storage systems (BESSs) are employed in the stand-alone microgrid. The coordination between BESSs and pre-existing diesel generators is an important issue to manage the microgrid more securely. This paper presents voltage and frequency control schemes considering the coordination of BESSs and DGs. The effectiveness for the operating method is validated via simulation studies.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권2호
• /
• pp.1-4
• /
• 2011

This paper describes current status of High Temperature Superconductor (HTS) rotating machinery development in Japan. Recent advances in production technology of HTS materials have continuously stimulated the development of high performance rotating machines. One of the most promising applications for such machines is the ship propulsion, and then some major projects have been underway. Also, energetic challenges for the HTS drive motor, e.g., automobile, have started. Furthermore, low speed and large capacity HTS generators are considered to be exciting candidates for wind turbines. The technology trends of the HTS rotating machines is introduced and discussed in this review paper.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1064-1072
• /
• 2017

The power of controlled generators in microgrids randomly fluctuate because of the stochastic volatility of the outputs of photovoltaic systems and wind turbines as well as the load demands. To address and dispatch these stochastic factors for daily operations, a dynamic economic dispatch model with the goal of minimizing the generation cost is established via chance-constrained programming. A Monte Carlo simulation combined with particle swarm optimization algorithm is employed to optimize the model. The simulation results show that both the objective function and constraint condition have been tightened and that the operation costs have increased. A higher stability of the system corresponds to the higher operation costs of controlled generators. These operation costs also increase along with the confidence levels for the objective function and constraints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.23-24
• /
• 2007

Most of modern wind turbines employs a doubly-fed induction generator (DFIG) system because it has many advantages due to variable-speed operation, relatively high efficiency and it small converter size. The DFIG system uses a wound rotor induction machine so that the magnetizing current of the generator can be fed from both the stator and the rotor. This paper presents a protection relaying algorism for DFIG using the DQ equivalent circuits. The induced voltages calculated from the stator and rotor sides are nearly the same in the steady state. They become different in the DQ equivalent circuits during an internal fault. The proposed algorithm compares the inducted voltages estimated from the stator and the rotor circuit converted into the stationary reference frame. If the difference between the induced voltages exceeds the threshold, the proposed algorithm detects an turn-to-turn fault.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.1-7
• /
• 2023

A grid-connected 3-level NPC inverter is a power conversion device that connects renewable energy generators, such as photovoltaic or wind turbines to the grid. Although many studies have focused on this inverter, commercializing it requires strictly satisfying various safety and power quality-related standards. Among many standards, leakage current and grid current total harmonic distortion(THD) can be affected by external factors such as installation environment, aging, and grid conditions. Hence, inverter operations that can satisfy these standards need to be explored. In this study a 3-level NPC inverter operation algorithm using the Phase Opposition Disposition-PWM method that can effectively reduce leakage current and switching frequency adjustment to reduce THD effectively has been proposed.