• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.511-520
• /
• 2008

The fundamental goal of this study is to analyze characteristics of combined relations of formative element factors that compose robot's face based on a result of preference response from robot's design. Also, in order to improve preference from the analysis result, this study intended to inquire into possibilities of suggesting design guideline. For these, pictures of 27 different kinds of robot faces were selected as experimental stimuli, and experiments of preference response and association response were performed. As a result of the experiments, various characteristics were achieved such as robot's eye shape having greater influences than facial structure, etc. Based on the result, formative element factor characteristics that could positively influence preference response on robot's face could be drawn and a basic design guideline could also be suggested. An eye should be oval so that the length-to-width ratio may be 1.67:1. The distance between both eyes should be 35% of the facial width. Also, eyes should be above the central latitude of the face so that they may be visually stable. It is advisable to round the face generally. Eyes should be harmonious with the face so that the robot may seem cute and charming.

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.90-97
• /
• 2008

The aim of this research was to detect and observe delivering generation effects from $F_0$ generation exposed to 4-nonylphenol 4NP) to $F_1$ generation on Tigriopus japonicus. The nauplius survival rate of $F_1$ from $F_0$ exposed to low 4NP concentration was significantly lower than other concentrations. Among the developmental process, copepodite first emergence day (CE) and adult male first emergence day (ME) on $F_1$ were accelerated relatively high concentration conditions. The sex ratio of $F_1$ was different between control group and treatment groups for 1, 10 and $30{\mu}g\;L^{-1}$ 4NP. The fecundity of $F_1$ was not significantly affected (except, $0.1{\mu}g\;L^{-1}$ 4NP). When 4NP concentrations were increased, first brooding day (FB) of F 1 was generally delayed. The length, width, and biomass of $F_1$ adult female were smaller than control group. In addition, the width and biomass of adult male were narrower or smaller than control group.

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.41-54
• /
• 1993

This paper presents the two and three -dimensional stability analysis of nonhom- ogeneous, c-o soil slopes. Potential failure surface is assumed as a logspiral curve refracted in boundaries of layers. In 3-D analysis, rotational soil mass is assumed with a cylindroid central part terminated with plane ends. Seismic force is considered by sesmic intensity. The program developed in this study is compared with the program PCSTABLS. The ratio of three-dimensional minimum factor of safety to two-dimensional case is examined and factor of safety changes are showed for the ratio of cylindroid length to slope height and numbers of slice. On such bases the following conclusions may by made : (1) The program developed in this program is less conservative than the program PCSTABLS. (2) The value of F2 of this study shows the larger differences than that of PCSTABLS with increasing friction angle (3) Factors of safety computed for 3-D geometry differ considerablely from ordinary 2-D factors of safety. Since Fb/F2 exceeds unity, three -dimensional effects tend to increase the factor of safety. (4) As the ratio of three - dimensional failure width of slope height, b/H increase, the value of Fb/Ff decreases and approaches 1.0 when bye is 14. (5) In calculating the factor of safety using the developed program the number of slices is suitable with the ranges of 30-40

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1057-1062
• /
• 2016

In this paper, a design method for a compact log-perio dic half-bow-tie dipole array antenna for an operation in a UWB band(3.1-10.6 GHz) is studied. The proposed antenna is miniaturized by using half-bow-tie shaped dipole elements instead of strip-type dipole elements, which are commonly used in a general log-periodic dipole array(LPDA) antenna, and by reducing the element spacing. The effects of the flare angle of the half-bow-tie elements and the spacing factor on input reflection coefficient and realized gain characteristics of the proposed log-periodic antenna are analyzed. The optimized antenna is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 2.95-11.31 GHz for a VSWR < 2, which assures the operation in the UWB band. In addition, the length and width of the proposed antenna are reduced to 32.1 % and 18.3 %, respectively, compared to the LPDA antenna.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.804-812
• /
• 2017

This study builds a database that can be reflected in the production of dress form for fitting by typifying the upper body shape of a senior male. This study analyzed the 3D shape data of 405 persons of the 5th Size Korea. The age range is from 50s 210 persons and 60s 205 persons. Analysis items to identify upper body shape of senior males consisted of 51 items. 3D shape data were also measured using a Geomagic Design ${\times}$ program for the analysis of the upper body of the senior male required for the dress form of this study. The reference point was based on the Size Korea 2010 3D measurement standard and created points (Back-protrusion) on shape data. As a result of the senior men type, the senior men's body type was classified into four types:1. Overall, the upper body is a large body type and the most undistorted overall body type 2. Width / Thickness Flatness is the largest and vertical length factor is the smallest abdominal obesity type 3. Severe flexion of the back part type 4. The upper body is small and the scapular bending is severe. The elderly body type showed a high distribution ratio in the type with severe flexion. The development of a dress form that reflects the cause of the finery issue can improve the fit of ready-to-wear.

• Parasites, Hosts and Diseases
• /
• v.31 no.3
• /
• pp.201-206
• /
• 1993

Based on the morphologic characteristics of oocysts of the genus Isosporn, we have demonstrated that I. ohioensis is a relatively common Isosporn species in dogs which are resident in Chonbuk province, Korea. The prepatent period of 1. ohioensis was four days. The size of the unsporulated oocysts in fresh stool specimens was $22.9{\;}\times{\;}19.8{\;}\mu\textrm{m}$ (R = 1.16). The size of the contracted sporonts was $17.4{\;}\times{\;}16.3{\;}\mu\textrm{m}$ (R = 1.061). By 96 hours, sporulation is complete and the ratio of length/width was constant relatively. And the sizes of oocysts and sporocysts were $22.8{\;}\times{\;}20.5{\;}\mu\textrm{m}$ (R = 1.11) and $15.0{\;}\times{\;}10.8{\;}\mu\textrm{m}$ (R = 1.39), respectively. At this time it is most reliable for the measurements of oocyst sizes of 1. ohioensis to provide with the identifiable clues against the others. It is therefore recommended that the clinical fecal specimens suspected of isosporosis should first be incubated and aerated for 96 hours before a definitive parasitological diagnosis can be reached. These and other observations contribute to the understanding of the biological characteristics and laboratory and clinical diagnosis of isosporosis.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.345-352
• /
• 1998

Compressive strength of concrete compression members strengthend with carbon fiber laminate(CFL) were studied from the test results. Test parameters are spacing, thickness, width, ply and spliced length of carbon fiber laminates. Specimens strength with sheets failed with sudden tensile rupture of the laminate, which indicate very brittle failure mode. Test result shows that closer spacing and to increas thickness of CFL is more effective. But strengthening ratio with 1-ply CFL is more effective than that of specimen with 2-ply CFL. Compressive strength capacity of specimen splied 24cm shows almost similar strength to that of non-spliced specimen. The ultimate load carrying of specimen strengthened with CFL ranges 1.11~1.86 times of that of non-strengthened specimen.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.61-66
• /
• 2015

In this study, manufacture of kitchen garden soil and its application on the growth of Lettuce has been performed. The optimal ratio of various raw materials for pH, total nitrogen, phosphate, cations, and salt content was found to be 49 : 35 : 10 : 5 : 1(w/w) in peatmoss, livestock manure, cocopeat, zeolite, and microbial fertilizer, respectively. In the growth experiment using Lettuce, the manufactured soil obtained 21% & 20% increase in leaf length and width, 17% increase in chlorophyll, and 22% in biomass, compared to the control.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.87-92
• /
• 1987

Crease cut pearled baller was studied in relation to product and quality, and processing electricity requirement with various pearling yields. 1. Increasing the pearling rate resulted in increasing broken grain of cut-Polished barley. 2. The range of length/width ratio in cut-polished baller were from 2.09 to 2.13 and those of pearled barley were 1.36, respectively. 3. Cut-polished barley required more electricity than pearled barley at the same polishing rate. As pearling rate increased at first polishing before cutting, total electricity requirement of cut-polished barley reduced significantly.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.156-161
• /
• 2011

We fabricated a schottky barrier metal oxide semiconductor field effect transistor(SB-MOSFET) by applying indium-tin-oxide(ITO) to the source/drain on a highly resistive GaN layer grown on a silicon substrate. The MOSFET, with 10 ${\mu}M$ gate length and 100 ${\mu}M$ gate width, exhibits a threshold gate voltage of 2.7 V, and has a sub-threshold slope of 240 mV/dec taken from the $I_{DS}-V_{GS}$ characteristics at a low drain voltage of 0.05 V. The maximum drain current is 18 mA/mm and the maximum transconductance is 6 mS/mm at $V_{DS}$=3 V. We observed that the spectral photo-response characterization exhibits that the cutoff wavelength was 365 nm, and the UV/visible rejection ratio was about 130 at $V_{DS}$ = 5 V. The MOSFET-type UV detector using ITO, has a high UV photo-responsivity and so is highly applicable to the UV image sensors.