• 제목/요약/키워드: Width-to-height

검색결과 2,400건 처리시간 0.032초

지게차 포크의 폭에 따른 파손 연구 (A Fracture Study due to the Fork Width of Forklift)

  • 한문식;조재웅
    • 한국기계가공학회지
    • /
    • 제17권2호
    • /
    • pp.124-129
    • /
    • 2018
  • A forklift is used to lift materials above a height of 2 m. The width of the fork determines the weight of the material it can carry. In this paper, three models of fractured forklifts were analyzed to determine if the fracture was caused by load fatigue due to the width of the fork. The position of the fork was fixed on each model, and a 2.5 ton load was placed at the upper part of the fork. The width distances on each of three models were 500 mm, 750 mm and 1000 mm, and the maximum equivalent stresses were 237.5MPa, 227.62MPa and 230.99MPa, respectively. This analysis demonstrated that as the load increased with use of the wider fork, the fatigue life remained to be nearly equivalent irrespective of fork width among all three models. The results of this study contribute to the durability and safety design of forklifts.

30~40대 비만 남성의 슬랙스 패턴개발을 위한 하반신 체형분류 (Body Shape Classification of the Lower Body of Obese men in their 30's and 40's for Slacks Pattern Development)

  • 신선미;도월희
    • 한국의류산업학회지
    • /
    • 제21권3호
    • /
    • pp.308-317
    • /
    • 2019
  • This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.

전남 신안군 한반도해송숲의 곰솔 수세약화 원인 분석 (Causes of Weakening Tree Vigor of Pinus thunbergii in Hanbando Coastal Forest in Shinangun, Jeollanamdo Province)

  • 김선화;박석곤
    • 한국환경생태학회지
    • /
    • 제35권4호
    • /
    • pp.398-407
    • /
    • 2021
  • 한반도해송숲의 지형환경, 기상조건, 토양 이화학적 성질과 곰솔의 생육상태를 조사해, 이곳 곰솔의 수세약화 원인을 찾아내고자 했다. 곰솔의 수세가 불량하거나 고사한 지역(수세불량지)과 대조구로서 곰솔의 생육상황이 양호한 지역(수세양호지)으로 나눠 조사했다. 그 결과, 수세불량지의 입목밀도는 수세양호지보다 유의적으로 높았지만, 수관폭은 반대로 수세양호지에서 더 넓었다. 고사목 개체수와 입목밀도는 서로 부(-)의 상관관계를 보였고, 또 입목밀도와 흉고직경·수고·수관고(crown height)·수관폭 사이에서는 부(-)의 상관관계를 보였다. 즉, 입목밀도가 높으면 개체의 수관이 겹쳐 하부 가지가 죽어 수관고와 수관폭이 작아졌다. 이에 엽량 감소에 따른 광합성량이 줄어들어 수고와 직경의 생장량이 적어졌다고 본다. 이로 인해 수세가 약해지면서 해안사구라서 수분·양분의 부족과 강한 조풍 등의 환경압이 가중되어 해안가 근처의 곰솔이 대규모로 죽은 것으로 판단된다. 한반도해송숲의 고사목 발생과 수세약화 원인은 복합적이지만, 곰솔 생장에 따른 적정한 입목밀도 관리 부족이라는 내부요인을 제1 요인으로 꼽을 수 있다. 또 곰솔 생육에 불리한 토양조건과 조풍, 강풍 등의 환경압을 제2 요인이라고 볼 수 있다.

절리면의 방향, 절리선 길이 및 광주 형상비가 광주 강도에 미치는 영향 분석 (The Change of Pillar Strength due to Joint Dip Angles, Total Trace Length and Width-to-Height ratio of a Pillar)

  • 최지원;이용기;송재준
    • 터널과지하공간
    • /
    • 제30권3호
    • /
    • pp.226-241
    • /
    • 2020
  • 지하 광산 공동의 안전성은 광주의 강도와 밀접한 관계가 있다. 광주의 강도를 알고 있다면 광주의 위험성을 판단할 수 있고 그에 따른 적절한 조치를 취할 수 있다. 광주의 강도는 광주 내에 존재하는 불연속면의 특성과 광주의 형상에 영향을 받는다. 본 연구에서는 광주를 관통하는 불연속면과 광주의 종횡비, 광주 내부에 존재하는 소규모의 내포 절리에 따른 강도 변화를 PFC 3D를 이용하여 분석하였다. 그 결과, 광주의 강도는 불연속면의 경사각에 영향을 받으며, 광주의 폭이 넓어질수록 강도가 증가하고 내포 절리의 수가 증가할수록 강도가 감소함을 확인하였다. 내포 절리로 인해 광주 표면에 나타나는 절리선 길이의 총합과 광주 강도와의 관계를 지수 함수로 회귀한 결과, 두 인자 사이의 높은 상관계수를 얻었다. 따라서 하나의 절리군이 존재할 때, 지수 함수식을 통해 절리선 길이의 총합으로부터 광주의 강도를 예측할 수 있다. 마지막으로 경사각이 60°, 30°인 두 절리군이 존재할 때 절리선 길이의 총합으로부터 광주 강도를 추정할 수 있는 식을 제시하였다.

노년 여성의 노화에 따른 체형변화 (Elderly Women's Body Shape Change with Aging)

  • 차수정
    • 한국의류학회지
    • /
    • 제44권6호
    • /
    • pp.1070-1086
    • /
    • 2020
  • This study analyzed the size of women in their 60s, 70s and 80s in the 2014 Human Body Dimension Survey data among Size Korea's 7th Human Dimension Survey Data in 2015. This study examined the characteristics of changes in female body shape according to aging and the age range. The height item gradually decreased from the 60s and then rapidly decreased to the 80s. In the case of the circumference item, a sharp change occurred in the section from 69 to 70 years old. The reduction in hip height, waist height, and navel level waist height was not significant compared to the decrease in stature. Both width, thickness, and circumference gradually decreased with age. It can be seen that the back bends forward and the legs become thinner than the body due to the aging phenomenon with increasing age. Even for older women, the characteristics of aging differ in their 60s, 70s and 80s, so age segmentation of silver clothing should be considered.

수로 장치내에서 공동영역 주변의 확산에 관한 실험적 연구 (An experimental investigaion of dispersion around cavity region in water channel)

  • 정상진
    • 한국대기환경학회지
    • /
    • 제9권4호
    • /
    • pp.295-302
    • /
    • 1993
  • The nature of the cavity region and dispersion around trianglular ridge was investigated using model. The artifical neutral boundary layer was simulated in water channel. Two dimensional trianglar ridges, having height of 1.2 cm and various width were placed normal to the flow. Mean velocity with many dimensionless parameters were measured and compared with wind tunnel results by other studies. Using vorticity generator and roughness, the neutral boundary layer was well represented by the water channel. concentration patterns resulting from dye source placed 0.2 cm height above were examined. Narrower the trianglar ridge width resulted in increased amplification factor and the larges amplification factor was observed near downward top of the ridge.

  • PDF

농촌생활에 적합한 부엌가구 디자인요소와 모델 계획연구 (A Study on the Design of Rural Kitchen Furniture)

  • 윤복자;지순;윤정숙;박은선;이은경;김희정
    • 한국실내디자인학회논문집
    • /
    • 제2호
    • /
    • pp.29-39
    • /
    • 1994
  • The purpose of this study was to design rural kitchen furnitures. Thirty seven rural houses were selected for this study. Present and past uses of space for cooling and dining were investigated by a field survey method. The Major findings were that ; 1) Sink, mixing, and range centers should be installed in rural kitchen 2) The depth of working center, 550-600mm was recommended. And working space cold be added by 150mm in depth and 100mm in height. The height of working center, 820mm-850mm was recommended . The minimum width of sink was 900 mm and the optimum one was 1200mm. The optimum width of mixing center and cooking center were 600m respectively 3) In the low ceiling of kitchen or the wooden structure of kitchen, a wall cabinet without upper cupboard was recommended. On the basis of the results, four types of rural kitchen furnitures is proposed.

  • PDF

ac-PDP에서의 셀 치수에 따른 전기, 광학적 특성에 관한 연구 (The study on the electrical and optical characteristics as cell spec in ac-pdp)

  • 문영섭;이성현;임성현;신중홍;유충희;이호준;박정후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1582-1584
    • /
    • 2001
  • In ac plasma display(PDP), an image quality mainly depends on the contrast ratio. And the contrast ratio is affected by the driving condition and size of discharge cell. In this study, the electrical and optical characteristics during reset, address and sustain discharge were investigated as the height and width of barrier rib were varied in order to obtain the highest contrast ratio. As a result, the optimum rib height and width were 140${\mu}m$ and 600${\mu}m$, respectively.

  • PDF

치관수복물의 형태와 치은반응에 관한 연구 (A Study on Corwn Contour and Gingival Response)

  • 양홍서;장완식
    • 대한치과의사협회지
    • /
    • 제21권5호통권168호
    • /
    • pp.415-423
    • /
    • 1983
  • A total of 202 full coverage crowns from 31 patients was investigated to find out the relationships between crown contour and gingival response. Every experimental crown has its contralateral natural tooth for its control group. Gingival Index and buccolingual width of the crowns were measured on both experimental and control group. Following conclusions were obtained from the study. 1. Most of the crown restorations were overcontoured and the increments were servere at cervical and height of contour area. 2. Height of contour and contact point of the restored crown were located near cervical area. Besides, most crowns had narrow embrasure with wide contact area. 3. Gingival Index around crown restorations was significantly larger than that of control group. 4. the interrelationship between Gingival Index and restored material or restored period was not verified at 5% significant level. 5. When grouping the artificial crowns into overcontoured, normal contoured, and undercontoured group by their width increment, the gingival inflammation was the severest in the overcontoured group and the mildest in the undercontoured group.

  • PDF

국민주택형 아파트 신발장의 규격화를 위한 기초조사 (A Basic Study on the Standardization of Foot wear Cabinet - At the General Public Housing Scale Apartment)

  • 장무순;신경주
    • 가정과삶의질연구
    • /
    • 제4권2호
    • /
    • pp.25-34
    • /
    • 1986
  • This study aimed to find out the suitable design of footwear cabinet. The questionnaire data from 1969 persons of 400 families about footwear cabinet showed following results. 1) The number of shoes was related with sex, age, occupation, family income, the number of family members and educational level of housewives. 2) The size of shoes in the range of 80% of the investigated shoes was 30cm of height, 30cm of length, and 10cm of width. 3) The satisfaction with footwear cabints was mainly decided by the size and space of the cabinet. 4) Umbrella, tools and shoe polish and brush were usually kept in the footwear cabinet as well as shoes. On the basic of the results above. The size of 108cm of length (20cm for umbrella), 35cm of width and 105cm of height is sugested as the desirable footwear cabinet for the General public housing scale apartment for 5 family members and this cabinet should have 5 divider and one flexible divider by 30cm which may be adjusted by 20cm.

  • PDF