• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.668-676
• /
• 2017

A two-dimensional numerical investigation is performed to study the influence of slot width of multi-stage stationary floating overtopping wave energy devices on overtopping flow rate and performance. The hydraulic efficiency based on captured crest energy of different device layouts is compared with that of single-stage device to determine the effect of the geometrical design. The results show optimal trends giving a huge increase in overtopping energy. Plots of efficiency versus the relative slot width show that, for multi-stage devices, the greatest hydraulic efficiency is achieved at an intermediate value of the variable within the parametric range considered, relative slot width of 0.15 and 0.2 depending on design layouts. Moreover, an application of adaptive slot width of multi-stage device is investigated. The numerical results show that the overall hydraulic efficiency of non-adaptive and adaptive slot devices are approximately on par. The effect of adaptive slot width on performance can be negligible.

• 대한가정학회지
• /
• 제8권1호
• /
• pp.21-35
• /
• 1970

1. For the purpose of making the basic pattern construction 100 girls attending the Seoul National University College of Home Economics were measured in finding of body size and coefficient of correlation which would be used as one basis of this study. 2. Coefficient of correlation of each body part based on the breast width was shown as follows; Correlation coefficients of bust to waist and hip were high and those of bust to shoulder width, neck height, back width, and breast width were low. None of that was found between bust and back length. It was not recognized so scientific to adjust the basic pattern construction with figures proportioned by those of neck, shoulder width, breast width, and back width. 3. The method of basic pattern construction obtained by this research has been demonstrated in direct wearing since 1967. It is believed that the result will contribute a great benefit in teaching clothing as well as in mass production industry of ready-made garments.

• 산업기술연구
• /
• 제29권B호
• /
• pp.47-56
• /
• 2009

University is very big scale among urban facilities as for single facilities and there is characteristic that accompany various university support functions in contiguity area. Width that have diverse spatial configuration generally our country university campus around was formed, this does function that connect university and ambit. Specially, formation enables change of spatial configuration that existent width system has if is new around university campus. Also, can form more animate and lively width spatial configuration by forming more various and complex width spatial configuration in width had formed in existing. It is that search special quality of university surrounding width spatial configuration analyzing existing width spatial configuration of Kangwon National University back gate by formation if this study is new in city and forecasts the change, and used space syntax by spatial configuration analysis method.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.183-190
• /
• 2005

In order to drive the high-density plasma displays, a high-speed driving technology must be researched. In this experiment, the relationship between the width of the address electrode and high-speed driving is analyzed using the Vt close curve and the panel structure for high-speed driving is proposed. In addition we show that the wider the width of the address electrode is, the narrower the width of the scan pulse becomes. Therefore, we could achieve the minimum data voltage of 50.1V at a scan pulse width of $1.0/{\mu}s$ and a ramp voltage of 210V at an address electrode width of $180/{\mu}m$ for the high-speed driving 4-inch test PDP.

• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.13-19
• /
• 2000

The stencil is a thin stainless sheet in which a pattern is formed, which is placed on a surface of plate to reproduce the pattern of electric circuit. Conventionally the stencil has been produced by etching process. This process has many anti-environmental factors. In this study, Nd : YAG laser cutting process has been applied for stencil manufacturing. The study is focused on estimating kerf width of laser cut stencil by E.B.P.(Error Back-Propagation). This algorithm is good for estimating target value from input value. In this paper, target value was kerf width, and input values were frequency, pulse width, cutting speed and laser power. E.B.P. after teaming input and target could estimate kerf width from some variables precisely.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.150-157
• /
• 1997

Uniform weld pool shape is important in determining the weld quality. And weld pool width is one of the most dominant factors of the seld pool shape. In order to control the weld pool width, the fuzzy logic controller, which is well adapted to the complicated nonlinear systems such as welding, was used in this study. The weld pool image was obtained through CCD camera, and the weld pool width was calculated by processing the image. Uaing the calculated width, welding speed, as a control input, was inferred by the fuzzy logic controller. An uniform weld pool width can be successfully obtained regardless of the disturbances in the system.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.219-233
• /
• 2023

Crack width is an important indicator to evaluate the health condition of the concrete structure. The crack width is measured by manual using crack width gauge commonly, which is time-consuming and laborious. In this paper, we have proposed a fast and simplified crack width quantification method via deep Q learning and geometric calculation. Firstly, the crack edge is extracted by using U-Net network and edge detection operator. Then, the intelligent decision of is made by the deep Q learning model. Further, the geometric calculation method based on endpoint and curvature extreme point detection is proposed. Finally, a case study is carried out to demonstrate the effectiveness of the proposed method, achieving high precision in the real crack width quantification.

• 대한치과교정학회지
• /
• 제32권2호통권91호
• /
• pp.117-127
• /
• 2002

본 연구는 전후방적인 부조화가 폭경에 영향을 미치는지 알기 위해 I급 정상교합군과 III급 부정교합군을 비교하였고, III급 부정교합군내에서 수직적인 부조화가 폭경에 영향을 미치는지 알기 위해 Hyperdivergent군과 Neutral군으로 나누어 폭경의 차이를 비교하였다. 부산대학교병원 치과교정과에 내원한 골격성 III급(ANB< 0$^{\circ}$) 부정교합자 중측모 두부방사선 계측사진상에서 하악 평면각(SN-Mandibular plane; 정상인의 평균 32 ${\pm}$ 5$^{\circ}$)이 1.5 SD이상(39.5$^{\circ}$이상)인 환자 37명 (남자 18명, 여자 19명 )을 hyperdivergent군(Group B)으로, 하악 평면각이 정상치의 0.5 SD이내인(32 ${\pm}$ 2.5$^{\circ}$) 40명 (남자 20명, 여자 20명)을 neutral군(Group C)으로 분류하였고 11개의 치과대학 교정과에서 선별한 정상교합과 정상적인 안모를 가진 성인 24) 중 41명(남자 20명, 여자 21명)을 정상교합군(Group A)으로 하여 이 세 군을 대상으로 연구하여 다음과 같은 결론을 얻었다. 1. 골격성 III급 부정교합군내에서 수직적인 양상에 따른 폭경 비율은 유의할 만한 차이가 없었다. 2. 정상교합군과 III급 부정교합군의 상, 하악 기저골에 대한 치아간 폭경 비율의 비교에서 상악에서는 III급 부정교합군의 비율이 더 컸고(p<0.001), 하악에서는 제 1대구치 부분을 제외한 모든 항목에서 III급 부정교합군의 비율이 작아서(p<0.001) III급 부정교합군이 정상교합군에 비해 기저골에 대해 상악 치아가 더 협측으로 경사되고, 제1대구치를 제외하고 기저골에 대해 하악 치아가 설측 경사되어 횡적인 치성보상이 잘 되어 있는 것으로 나타났다(p<0.001). 3. 정상교합군과 III급 부정교합군의 상악에 대한 하악의 치아간 폭경 비율의 비교에서 모든 부분에서 유의할 만한 차이가 없었다. 4. 정상교합군과 III급 부정교합군의 상악에 대한 하악의 기저골 폭경 비율의 비교에서 모든 부위에서 III급 부정교합군이 정상교합군보다 더 커서(p<0.0001) III급 부정교합군의 상악 기저골 폭경이 하악보다 더 좁게 나타났다.

• 한국의학물리학회지:의학물리
• /
• 제15권4호
• /
• pp.173-178
• /
• 2004

목적: Leaf width가 다른 다엽 콜리메터(MLCs)를 이용, 두개내 병변에 관하여 각각의 세기조절방사선치료(IMRT) 계획을 수립하여, 이를 선량학적으로 비교하였다. 재료 및 방법: BrainSCAN ver. 5.2. 소프트웨어를 사용하여 micro-MLC로 이미 치료가 수행된 12명의 환자를 Varian사의 120 MLC와 80 MLC로 다시 치료계획하였으며 이 다엽 콜리메터들은 중심에서의 leaf width가 각각 3 mm, 5 mm, 10 mm이다. 이 때, 계획용 표적체적은 3.3～339.2 cc였고, 조사된 빔의 수는 3～7개이다. 이들을 uniformity Index, conformity index, 결정장기와 정상조직 내 선량으로 서로 비교하였다. 결과: 계획용 표적체적의 uniformity Index경우, mMLCs와 120 MLCs 사이에서 (p=0.057) 120 MLCs와 80 MLCs 사이에서(p=0.388) 통계적으로 차이가 없었다. 그러나 mMLCs와 80 MLCs 사이에서 차이를 보였다(p<0.001). 계획용 표적체적에 대한 최대 목표선량은 leaf width와 연관성이 없었다. 반면에, conformity Index의 경우는 mMLCs와 120 MLCs (p=0.003), mMLCs와 80 MLCs (p=0.003), 50 MLCs와 120 MLCs (p=0.003) 사이에서 통계적인 차이를 보였다. 처방선량의 70%와 50% 이상 조사되는 뇌간의 부피는 다엽 콜리메터의 leaf width가 증가함에 따라 증가하였다. 특히, leaf width의 변화에 따라 방사선에 조사되는 정상 뇌조직의 부피가 분명하게 변하였다. Leaf width가 3 mm인 다엽 콜리메터와 비교하였을 때, leaf width가 5 mm, 10 mm인 다엽 콜리메터의 부피 증가는 처방선량의 50% 이상 조사되는 정상조직의 경우, 각각 6.3%, 23.2%였고, 처방선량의 70% 이상 조사되는 정상조직의 경우, 각각 8.7%, 32.7%였다. 결론: 계획용 표적체적의 uniformity Index와 최대 목표선량은 leaf width와 연관성이 없었다. 그렇지만 conformity Index 는 leaf width가 감소함에 따라 향상되었다. 두개내 병변 치료시, 정상 뇌조직의 보존에 있어 leaf width 5 mm, 10 mm인 다엽 콜리메터를 이용한 치료계획보다 leaf width 3 mm인 다엽 콜리메터를 이용한 치료계획이 보다 효과적임을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제2권1호
• /
• pp.25-29
• /
• 1984

In order to investigate the predominant factors which determine penetration depth and bead width in electron beam welding, bead-on-plate welding was carried out using 7075-T6 Al alloy. The results obtained from the present experiments can be summarized as follows; 1) With increasing accelerating voltage, bead width (B.W) decreases but penetration increases remarkably. 2) Increasing beam current results in increase of bead width and penetration respectively, and decrease of the ratio of penetration increment to beam current increment. 3) With increasing welding speed penetration decreases remarkably, while bead width creases.