• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.69-75
• /
• 2009

This research regard it as most meaningful to realize the importance of the hedgerow in cultivated areas functioning as a residual landscape element in rural landscape and set improvement guidelines through landscape character and value analysis to cope with landscape malfunction. The results of summary are as follows. 1) First of all, as a result of landscape character analysis of edge stripe in cultivated land in total of 7 case areas, for example, the edge stripe in cultivated land in case area 4 and 8 maintain the width of 10m and are assessed satisfactory in terms of vegetation development condition, appearance of living species, connectivity, buffer capacity and so on. Also, as a result of structural character of correlation analysis among items, the correlation coefficient between width and appearance of living species showed 0.941, the highest. Following are connectivity and appearance of living species and width and buffer capacity respectively: 0.841 and 0.740. 2) As a result of landscape character analysis of uncultivated stripe in total of 6 case areas, it is analyzed that case area 4 maintains the widest width as almost 4.5m average width and considered valuable as I degree in vegetation development condition, filtering, and connectivity. 3) As a result of problem analysis of uncultivated stripe, for example, case 3, 9, and 10 was analyzed that the width was below 1.25m which is too small to carry out the function of buffer and habitat for living creature, so minimum standard width was set between 4~5m through comprehensive analysis of character of each case area. Based on the result above landscape character, value and problem analysis, main improvement guidelines are set in terms of width, connectivity, filtering, and vegetation development, restrictive practices and so on.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.75-86
• /
• 2016

PURPOSES : The purpose of this study is to investigate characteristics of crack spacing and crack width and their relationship in continuously reinforced concrete pavement (CRCP) based on the data obtained from long-term field observations. METHODS : The crack spacings and crack widths are measured periodically over 10 years at two different CRCP sections: one with asphalt bond breaker beneath concrete slab, and the other with bonded lean concrete base beneath concrete slab. The effects of steel ratio, type of underlying layer, terminal treatment method, and seasonal temperature change on the crack characteristics are evaluated by analyzing the measured data. RESULTS : The CRCP with lean concrete base shows smaller crack spacings than those of the CRCP with asphalt bond breaker. As the steel ratio increases, both the crack spacing and crack width tend to decrease. The crack width becomes larger as the crack age increases, but once the crack age is over a certain value the crack width tends to converge. When the terminal anchor lug system is not used and the expansion joints are employed at the terminals, the crack spacings and crack widths increase near the terminal sections. The crack spacing and crack width seem to be proportional each other, but not necessarily linearly, and their relationship is more distinguished in the summer when the crack widths become smaller. CONCLUSIONS : The steel ratio, underlying layer type, terminal treatment method, and seasonal temperature change affect the characteristics of cracks and the crack spacing and crack width are related to each other.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.223-228
• /
• 2011

The initial joint width design of the terminal joint between post-tensioned concrete pavement (PTCP) and jointed concrete pavement (JCP) was studied in this research. The joint width between PTCP and JCP directly affects noise and ride quality. If the initial joint width is very large, noise increases and ride quality decreases. If the initial joint width is very small, on the other hand, under high temperatures, PTCP slabs can blow up, or failures near the joint can occur due to excessive compressive stresses. The terminal joint width behavior between PTCP and JCP near Jumunjin at Donghae expressway under temperature changes was measured in August and November 2010 and the data was analyzed. From this study, the design methodology of the optimal initial terminal joint width was proposed.

• Steel and Composite Structures
• /
• v.13 no.1
• /
• pp.15-33
• /
• 2012

For an axially loaded box-shaped member, the width-to-thickness ratio of the plate elements preferably should not be greater than 40 for Q235 steel grades in accordance with the Chinese code GB50017-2003. However, in practical engineering the plate width-to-thickness ratio is up to 120, much more than the limiting value. In this paper, a 3D nonlinear finite element model is developed that accounts for both geometrical imperfections and residual stresses and the ultimate capacity of welded built-up box columns, with larger width-to-thickness ratios of 60, 70, 80, and 100, is simulated. At the same time, the interaction buckling strength of these members is determined using the effective width method recommended in the Chinese code GB50018-2002, Eurocode 3 EN1993-1 and American standard ANSI/AISC 360-10 and the direct strength method developed in recent years. The studies show that the finite element model proposed can simulate the behavior of nonlinear buckling of axially loaded box-shaped members very well. The width-to-thickness ratio of the plate elements in welded box section columns can be enlarged up to 100 for Q235 steel grades. Good agreements are observed between the results obtained from the FEM and direct strength method. The modified direct strength method provides a better estimation of the column strength compared to the direct strength method over the full range of plate width-to-thickness ratio. The Chinese code and Eurocode 3 are overly conservative prediction of column capacity while the American standard provides a better prediction and is slightly conservative for b/t = 60. Therefore, it is suggested that the modified direct strength method should be adopted when revising the Chinese code.

• The International Journal of Costume Culture
• /
• v.4 no.3
• /
• pp.182-194
• /
• 2001

The main purpose is to study lines on different body types and to disguise any imperfections by using diverse princess lines. We separated festers body shapes into specific body types, A, H by applying both the direct and the indirect measurements. Following are the results of the study: 1. nose are the resulting illusion effects when the shoulder width of the princess line was fixed. In case of the armhole princess line, the illusion that the waist intervals were narrow or wide in A-line silhouette. In case the shoulder princess line, when the waist interval was narrow, it appeared to show narrow shoulder in A-line silhouette. While the wide waist interval shows the wide shoulder width in H-line silhouette. It regards body type H in the same light as H-line silhouette when the waist interval is narrow, it appeared to show narrow shoulder width in A-line silhouette. When the waist interval was wide, it appeared to give the narrow shoulder width. 2. When the princess lines waist width was fixed in order to study illusion effects of waist widths. Generally, for body type A, Whether the waist interval princess line is narrow or wide, the princess line is located comparatively wide, in A-line silhouette appeared to show relatively slender waist. For body type H, whether the waist interval is narrow or wide, the princess line us situated comparatively narrow interval, H-line silhouette appeared to show sum waist but the differences are not significant 3. The illusion of the hip were studied by fixating the width of the skirt and varying the locations of princess line and waist widths. For the location of both armhole and shoulder princess line in H and A-line silhouette, the narrow shoulder width and the waist appeared to show narrow hips. mile they are wide appeared to show wide hips. 4. With both waist and skirt width fuel, all two body types showed taller and slender postures when the princess line originated from the shoulder compare to the armhole.

• Journal of the Korean earth science society
• /
• v.31 no.4
• /
• pp.348-353
• /
• 2010

The scattered light of solar radiance near the infrared ray area was observed to measure $H_2O$ and $O_2$ absorption lines. The changes of $H_2O$ and $O_2$ equivalent width were calculated on the basis of the measurement. $O_2$ equivalent width showed negative correlation with the amount of solar radiance; $O_2$ equivalent width had a tendency to diminish as the amount of the solar radiance increased and to increase as the amount of the solar radiance decreased. On the other hand, $H_2O$ equivalent width showed the positive correlation with the amount of solar radiance. Especially it was noted that the sum of equivalent width of absorption lines created by $H_2O$ and $O_2$ in a day was fairly constant. It is implied that the constant equivalent width is caused by the complementary development of photodissociation and recombination in $O_2$ and $H_2O$.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.3
• /
• pp.89-103
• /
• 2011

The purpose of this study is to analyze the formative characteristics of accordion pleats shown in 10/11 S/S London, Paris, New York collection and evaluate the differences of visual image by variations in the width of pleats and the length of the accordion pleats skirt. The stimuli are 21 samples: 7 variations of the width of pleats and 3 variations of the length of skirt. The data has been obtained from 43 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test. The results of the study are as follows: Accordion pleats was first introduced by Marriano Fortuny. He published delphos dress by creating silk pleats manufacturing technique and it was recognized as the best pleats work. Since then, pleats with synthetic fiber characteristics were used by many fashion designers. Accordion pleats were used in various items including one-peice, skirt and pants in collection of 2010 and 2011. The design of accordion pleats skirt used different width of pleats, length of the skirt and materials. The visual image by the width of pleats and the length of skirt are composed of 3 factors : dearness, attractiveness and elegance. In these factors, dearness factor is estimated by the most important factor. The accordion p1eats skirt is most attractive and dear when the width of pleats is the shortest, 1/8", and the width of 4/8" and 5/8" follows. The accordion pleats skirt is most attractive and dear when the length of skirt is similar to that of mini-skirt, and the skirt was estimated to be elegant as the skirt gets longer. When the length of skirt is in between, the skirts were estimated to be ambiguous in all visual images. The interaction effect of visual image according to the changes in width of pleats and skirt length of accordion pleats skirt was seemed to have significant differences by factors, and the main effect had great differences in all factors.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.4
• /
• pp.101-112
• /
• 2013

The purpose of this study was to evaluate the differences of the visual image on the variations in the waist position and the width of the wide pants. The stimuli were 9 samples: 3 variations of the waist position and 3 variations of the width of hem line. The data was obtained from 56 fashion students and analyzed by using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows; 1. The visual evaluation by the waist position and the width of the wide pants is composed of 4 factors: attractiveness, physical characteristics, modesty, and personality. Among these factors, the attractiveness was the most important. 2. The high waist pants showed the most characteristic and soft under the condition that the width of the hem line was 98cm at the third stage, while the natural waist pants showed no characteristics and stiff in case the width of the hem line was 66cm at the first stage. 3. The first stage pants were simplest and modest in case the waist position was low, while the third stage pants were the most complicated and untidiest in case the waist position was natural. 4. The waist position and the width of the wide pants interacted with the physical characteristics and the modesty. 5. According to the MCA on the attractiveness and the personality, the width affected to the visual image of the wide pants than the waist position did.

• Imaging Science in Dentistry
• /
• v.32 no.2
• /
• pp.89-97
• /
• 2002

Purpose: The objective of this study is to find the differentiating characteristics of ameloblastomas and odontogenic keratocysts of the jaw by analyzing computed tomography (CT) images of the lesions, clarify radiological characteristics associated with jaw lesions, and to make a diagnsis based on these findings. Materials and Methods : Test subjects were chosen among the patients who were diagnosed as having an odontogenic keratocyst or ameloblastoma at the Yonsei University Dental Hospital from January 1996 to December 2000 and had CT scans taken preoperatively. The subject pool was comprised of 51 cases of odontogenic keratocyst and 37 cases of ameloblastoma. The following measures were used for image analysis of the lesion: the anatomic location, CT pattern, mesiodistal width, buccolingual width, the ratios between mesiodistal width and buccolingual width, height, CT number, homogeneity of radiodensity, the appearance of a sclerotic rim, continuity of adjacent cortical bone, and displacement and resorption of adjacent teeth. Results: Comparing the CT patten, mesiodistal width, buccolingual width, height, CT number, homogeneity, appearance of sclerotic rim, continuity of adjacent cortical bone, there were statistically significant differences between ameloblastoma and odontogenic keratocyst test subjects (p<0.05). Comparing the ratios between mesiodistal width and buccolingual width, displacement and resorption of adjacent teeth, there were no statistically significant differences (p>0.05). Conclusion: We compared odontogenic keratocysts and ameloblastomas in CT scans. They occurred most frequently in the posterior to the ramus of the mandible. The findings of patterns of the CT images showed that size and border of lesions were more aggressive in ameloblastomas than in odontogenic keratocysts. The internal contents represented an increased attenuation area (IAA) in odontopenic keratocyst. Odontogenic keratocysts were shown to have higher CT numbers than ameloblastomas.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.293-298
• /
• 2004

We investigate the effect of the wing width and thickness of a Double-Sided Deep-Ridge(DSDR) vertical directional coupler on the coupling length dependent on the polarization, We have found that the DSDR vertical directional coupler without a wing does not have polarization independent coupling lengths. The variation of the coupling length of TE and TM modes and the difference between the coupling lengths of the two modes are negligible as the wing width increases beyond the specific wing width for the same wing thickness. Thus, we can see that a DSDR vertical directional coupler has a wing width larger than the minimum wing width to obtain the polarization independent coupling length. The minimum wing width increases as the wing thickness increases for the same core thickness and as the core thickness decreases for the same wing width. Also, we have found that the minimum wing thickness is determined by the core thickness and the minimum wing thickness decreases as the core thickness increases.