• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.791-795
• /
• 2000

Amorphous chalcogenide glasses have a wide variety of light-induced effects. In this study, we have investigated the diffraction efficiency of chalcogenide. As$_{40}$ Ge$_{10}$ Se$_{15}$ S$_{35}$ thin films by the various applied electric fields. The holographic grating in these thin films has been formed using a linearly polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two method of applied electric field in the perpendicular and parallel to the direction of inducing beam. We obtained that properties of diffraction efficiency in the two methods of applied electric field. The result is shown that the diffraction efficiency of parallel electric field is 285% increase, η=1.1$\times$10$^{-3}$ and the diffraction efficiency of perpendicular electric field is 80% decrease, η=9.83$\times$10$^{-5}$ . Also, we have investigated the anisotropy property on chalcogenide thin films by the electric field effects.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.538-544
• /
• 2012

The bubbles made of hydrogen and oxygen gases producted by electrolysis disturb the electrolysis, but the behavior of these bubbles in the electrolysis stack isn't clearly defined. In order to study on the behavior of bubbles in the flow pattern of the meshes type separator, the flow visualization experiment was performed by using of a visible alkaline electrolysis stack and a stereoscopic microscope. As the results, a fine size bubbles adhered to the separator's surface in the electrolyte solution have grown large sized bubbles until each bubble's buoyance is lager than the sum of surface adhesion force and weight. And then the large bubbles flow into the upper area of the separator. Also, as wide area of the separator have been occupied by various sized bubbles, the electrolysis efficiency is declined.

• 한국광학회지
• /
• 제21권4호
• /
• pp.175-178
• /
• 2010

본 논문에서는 은-산화막-은 구조의 박막형 에탈론 기반의 투과형 컬러필터를 제안하고 구현하였다. 제안된 박막형 소자는 전자빔 리소그래피 방식에 비해 넓은 유효면적을 갖고 적외선 대역에서의 차단 특성이 우수하다. 또한 금속의 분산특성 및 두께 그리고 기판의 영향 등을 고려하기 위하여 FDTD 방법을 도입함으로써 제안된 소자를 설계 및 분석하였다. 설계된 청색, 녹색, 적색 필터 소자의 산화막 캐비티 두께는 각각 100, 130, 160 nm였으며, 은 박막의 두께는 25 nm였다. 얻어진 측정결과를 살펴보면, 중심파장은 각각 480, 555, 650 nm, 대역폭은 각각 약 120, 100, 120 nm였으며 투과율은 약 60%였다. 그리고 빔의 입사각에 대한 상대적인 투과율 변화율은 ~1%/degree 였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.114-114
• /
• 2009

ZnO has received considerable attention due to its potential applicability to optoelectronic devices such as ultraviolet-light emitting diodes (UVLEDs) and laser diodes (LDs). As well known, however, polar ZnO with the growth direction along the c-axis has spontaneous and piezoelectric polarizations that will result in decreased quantum efficiency. Recently, nonpolar ZnO has been studied to avoid such a polarization effect. In order to realize applications of nonpoar ZnO-based films to LEDs, growth of high quality alloys for quantum well structures is one of the important tasks that should be solved. $Mg_xZn_{1-x}O$ and $Cd_xZn_{1-x}O$ is ones of most promising alloys for this application because the alloys of ZnO with MgO and CdO provide a wide range of band-gap engineering spanning from 2.4 to 7.8 eV. In this study, we investigated on $Mg_xZn_{1-x}O$ films grown with various Mg/Zn flux ratios The films were grown on R-plane sapphire substrates by plasma-assisted molecular beam epitaxy (PAMBE). we investigated on $Mg_xZn_{1-x}O$ films grown with various Mg/Zn flux ratios. The films were grown on R-plane sapphire substrates by plasma-assisted molecular beam epitaxy (PAMBE). With the relatively low Mg/Zn flux ratios, a typical striated anisotropic surface morphology which was generally observed from the nonpolar (11-20) ZnO film on r-plane sapphire substrates. By increasing the Mg/Zn flux ratio, however, additional islands were appeared on the surface and finally the surface morphology was entirely changed, which was generally observed for the (0001) polar ZnO films by losing the striated morphology. Investigations by X-ray $\Theta-2{\Theta}$ diffraction revealed that (0002) and (10-11) ZnO planes are appeared in $Mg_xZn_{1-x}O$ films by increasing the Mg/Zn flux ratio. Further detailed investigation by transmission electron microscopy (TEM) and photoluminescence (PL) will be discussed.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.133-137
• /
• 2018

Increasing interest in prognostics and health management has heightened the need for wireless sensor networks (WSN) with efficient power sources. Piezoelectric energy harvesters using Pb(Zr,Ti)O3 (PZT) are one of the candidate power sources for WSNs as they efficiently convert mechanical vibration energy into electrical energy. These types of devices are resonated at a specific frequency, which has a significant impact on the amount of energy harvested, by external vibration. Hence, precise prediction of mechanical deformation including modal analysis of piezoelectric devices is crucial for estimating the energy generated under specific conditions. In this study, an experimental vibrational system capable of controlling a wide range of frequencies and accelerations was designed to generate mechanical vibration for piezoelectric energy harvesters. In conjunction with MATLAB, the system automatically finds the resonance frequency of harvesters. A small accelerometer and non-contact laser displacement sensor are employed to investigate the mechanical deformation of harvesters. Mechanical deformation under various frequencies and accelerations were investigated and analyzed based on data from two types of sensors. The results verify that the proposed system can be employed to carry out vibration experiments for piezoelectric harvesters and measurement of their mechanical deformation.

• 한국수자원학회논문집
• /
• 제54권3호
• /
• pp.167-179
• /
• 2021

하천 합류부는 두 하천이 만나 형성되는 지역으로 합류부 구간의 혼합 매커니즘을 이해하기 위해서는 지류의 다양한 유입조건에 따른 본류와의 수체혼합의 공간적인 패턴을 분석하는 것이 중요하다. 그러나, 대부분의 합류부 연구들은 실측을 통한 현장데이터를 획득하기 어렵기 때문에 수리 및 수질 수치모형을 통한 연구가 주로 수행되어 왔다. 본 연구에서는 지류와 본류의 합류의 혼합 현상을 규명하는 인자로 유속과 수심 등 기본적인 수리학적 인자들 외에 최근 하천 유사측정을 위해 부유사농도의 지표로 연구되고 있는 ADCP의 초음파산란도를 활용하여 합류부에서 상이한 유사특성을 가진 두 수체가 혼합되는 양상을 측정하여 합류부의 혼합 특성을 해석하고자 하였다. 초음파산란도는 부유사와 관련되는 인자로 SonTek ADCP 이동식으로 측정된 초음파산란도(SNR)자료를 빔퍼짐에 대한 보정, 물에 의한 흡수를 고려하여 보정한 후 3차원 혼합거동의 공간적인 분포를 도출하였다. 그리고 측정기간 중 드론(UAV), LISST를 이용하여 합류부의 혼합양상을 모니터링하여 초음파산란도를 이용한 분석결과와 비교하였다. 분석결과, ADCP로부터 제공되는 초음파산란도를 보정한 결과 합류부의 3차원적인 유사 혼합의 공간적 특성을 규명하는 데 적합한 인자라고 할 수 있었고, 상이한 본류와 지류의 유입을 고려하였을 때 다양한 혼합 거동을 분석하는데 지표로 사용이 가능함을 확인할 수 있었다. 따라서 본 연구에서는 남강과 낙동강의 합류부에 대해 초음파산란도를 활용하여 합류부의 혼합 특성을 분석하였다.