• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.413-421
• /
• 1990

Acoustic emission signals due to leak from circular holes of 0.4, 1, 2 and 4mm diameter and rectangular slits of different geometry having the same cross section as 4mm diameter hole was studied both analytically and experimentally. Acoustic emission signals from a wide-band type transducer were transformed to digital signals through a digital oscilloscope, and $V_{rms}$ and frequency spectrum were obtained by processing digital signals. Relationships between acoustic parameters and fluid mechanical parameters were derived analytically. A quadrapole aerodynamic model was applied in the analysis of leak from the circular holes and $V_{rms}$ was found to be proportional to the root square of leak rate through the circular hole. A modified model based on dipole source mechanism and laminar equivalent diameter was applied in the analysis of leak signals from the rectangular slits. In the case of constant pressure, $V_{rms}$ increased as the laminar equivalent diameter of slit decreased. In the case of constant laminar equivalent diameter, however the result was similar to that for leak from the circular hole. The frequency spectra of leak signals shows the same frequency characteristics irrespective of the pressure difference.rence.

• 한국멀티미디어학회논문지
• /
• 제9권1호
• /
• pp.51-58
• /
• 2006

본 논문은 최근 표준화(IEEE802.15.3a)가 진행중인 Ultra Wideband(UWB) 시스템에서 현재 제안된 방식인 DS-CDMA 방식과 OFDM 방식을 혼합한 형태인 MC-CDMA 방식을 UWB 시스템에 적용하고, 그 성능을 평가한다. DS-CDMA 방식은 다중경로 성분을 검출하기 위해 많은 Rak Finger들이 필요하기 때문에 시스템의 복잡도가 증가하고 OFDM 방식은 주파수 호평을 끈 상태에서 방사 전력이 FCC에서 규정을 만족하지 못한다. 따라서 두 시스템의 혼합 형태인 MC-CDMA 방식이 시스템의 복잡도는 D5-CDMA 보다 간단하면서 주파수 선택적 페이딩 채널에서 좋은 성능을 발휘하고 OFDM 방식보다 넓은 대역폭을 사용함으로써 스펙트럼당 방사 전력이 낮아진다. MC-CDMA 방식을 수식적으로 분석하고 DS-CDMA, OFDM 방식과 시뮬레이션을 통해 성능을 비교하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.207-211
• /
• 2006

IEEE 802.15.4a에서는 첩(Chirp)신호을 이용한 UWB(Ultra Wide Band) 시스템으로서 DBO(Differential Bi-Orthogonal)-CSS(Chirp Spread Spectrum) 기술을 선택적 표준안으로 정하였다. 기존 DBO-CSS에서는 다중 피코넷 간섭(MPI; Multiple Piconets Interference)을 피하기 위하여 각 피코넷 별로 Different Time-Gap을 할당하고 있다 하지만 완벽한 직교성이 존재하지 않는다는 특성을 가지고 있어서 간섭의 영향에 민감할 수 밖에 없고, 무선통신시스템의 성능 저하를 야기시킨다. 본 논문에서는 각 피코넷 별로 보다 완전한 직교성을 확보하기 위하여, 확산코드기법을 적용한 CSS 변복조 알고리즘을 제안하고, 또한 일정한 시간 구간동안 연속적인 직교특성을 가지는 이진 ZCD(Zero Correlation Duration) 코드를 사용하여 BER(Bit Error Rate) 성능 분석을 통해 SOP(Simultaneously Operating Piconets) 환경에서 다중 피코넷 간섭 등의 영향을 효과적으로 제거함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.701-706
• /
• 2006

In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas. We examined the effects of the post annealing temperature on the structural variation of the DLC films. The films were annealed at temperatures ranging from 300 to $900^{\circ}C$ in steps of $200^{\circ}C$ using RTA equipment in nitrogen ambient. The thickness of the film and interface between film and substrate were observed by surface profiler, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), respectively. Raman and X-ray photoelectron spectroscopy (XPS) analysis showed that DLC films were graphitized ($I_D/I_G$, G-peak position and $sp^2/sp^3$ increased) ratio at higher annealing temperature. The variation of surface as a function of annealing treatment was verified by a AFM and contact angle method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.546-546
• /
• 2013

Zinc silicate ($Zn_2SiO_4$) has been identified as a suitable host material for a wide variety of luminescent activators, such as transition metal and rare earth elements. In particular, manganese-activated $Zn_2SiO_4$ exhibits highly efficient photoluminescenceand cathodoluminescence, which allows this material to be used in fluorescent lamps and display applications. In this study, we investigated the green and yellow luminescence from Mn-doped $Zn_2SiO_4$ thin films that were synthesized using radio frequency magnetron sputtering followed by annealing at $600{\sim}1,200^{\circ}C$ The refractive index of the $Zn_2SiO_4$: Mn films showed normal dispersion behavior. It was found that the $Zn_2SiO_4$: Mn films annealed at $800^{\circ}C$ ossessed a mixture of alpha and beta phases. The obtained photoluminescence spectrum consisted of two emission bands centered at 525 nm in the green range and 574 nm in the yellow range. The green luminescence originates from the divalent Mn ions in alpha phase of $Zn_2SiO_4$, while the yellow luminescence comes from the divalent Mn ions in beta phase. The films annealed at and above $900^{\circ}C$ xhibited only the alpha phase. The broad PL excitation band was observed ranging from 220 to 300 nm with a maximum at around 243 nm.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.177-181
• /
• 2012

Copper composite materials have attracted wide attention for energy applications. Especially $CuInS_2$ has a desirable direct band gap of 1.5 eV, which is well matched with the solar spectrum. $CuInS_2$ nanoparticles could make it possible to develop color-tunable $CuInS_2$ nanoparticle emitter in the near-infrared region (NIR) for energy application and bio imaging sensors. In this paper, $CuInS_2$ nanoparticles were successfully synthesized by thermo-decomposition methods. Surface modification of $CuInS_2$ nanoparticles were carried out with various semiconductor materials (CdS, ZnS) for enhanced optical properties. Surface modification and silica coating of hydrophobic nanoparticles could be dispersed in polar solvent for potential applications. Their optical properties were characterized by UV-vis spectroscopy and photoluminescence spectroscopy (PL). The structures of silica coated $CuInS_2$ were observed by transmission electron microscopy (TEM).

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1660-1669
• /
• 2014

Partial discharge (PD) detection plays a major role in the life time assessment of liquid insulation in power transformers. Many research works are being carried out to replace conventional mineral oil insulation in transformers by vegetable oils. It is necessary to understand the PD characteristics of vegetable oils before recommending them as an alternate for mineral oil. In this paper, the breakdown strength and PD characteristics of palm and corn oil were investigated in both unaged and thermally aged conditions. Laboratory experiments were performed as per IEC test procedures. PD signals were measured using wide band detection system. Phase resolved PD pattern of vegetable oils and mineral oil were compared. Effect of increase in voltage stress on the PD pattern of palm and corn oil were studied. Time and frequency domain analysis of PD pulses at needle-plane electrode configuration was carried out. Statistical analysis of PD pattern i.e. skewness and shape parameter variations with respect to applied thermal stress were also carried out. From the results, it is observed that palm and corn oils have better breakdown strength and PD characteristics even under long-term thermal stress and hence they can be used for power transformer applications.

• 천문학회보
• /
• 제42권1호
• /
• pp.54.1-54.1
• /
• 2017

The UKIRT Wide-field Infrared survey for Fe+(UWIFE) is an unbiased survey of the first Galactic quadrant, with narrow-band filter centered on $1.644{\mu}m$. This survey covers $7^{\circ}$ < l < $62^{\circ}$ and |b| < $1.5^{\circ}$, where active interaction of stars and interstellar medium is expected. With median seeing of 0.8 arcsec, 5 - sigma detection limit of 18.7 mag and surface brightness limit of $8.1{\times}10^{-20}W\;m^{-2}arcsec^{-2}$, this survey gives an opportunity to statistically study Galactic [Fe II] - emitting sources for the first time. In order to identify Ionized Fe Objects (IFOs) in survey area systematically, we conducted visual inspection and automatic detection simultaneously. Total of ~300 extended IFOs are identified, most of them are found out to be part of supernova remnants (SNRs), young stellar objects, HII regions and planetary nebulae. The majority of IFOs are new discoveries which reveal shocked structures in high-extinction region. Spatial distribution of IFOs suggest that they trace Galactic structure. As a part of spectroscopic follow-up, we observed SNR candidate IFO J183740.829-061452.41 with IGRINS (Immersion Grating Infrared Spectrograph, Yuk+2010), mounted on 2.7m Harlan Smith telescope. This unknown arc-like, 6'-long IFO is coincident with inner part of radio continuum loop G25.8+0.2, which has been known as HII region. However, interior of this radio shell is filled with diffuse soft X-ray emission, and possible association of hard X-ray pulsar / pulsar wind nebula makes the nature of the IFO unclear. The H and K-band 2D spectrum shows shock-ionized [Fe II] filaments, which is apart from photoionized HII filaments. In this presentation we present basic statistics of newly identified IFOs, as well as the follow-up study of IFO J183740.829-061452.41.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.64-64
• /
• 2000

Since its discovery in 1991, the carbon nanotube has attracted much attention all over the world; and several method have been developed to synthesize carbon nanotubes. According to theoretical calculations, carbon nanotubes have many unique properties, such as high mechanical strength, capillary properties, and remarkable electronical conductivity, all of which suggest a wide range of potential applications in the future. Here we report the synthesis in the catalytic decomposition of acetylene at ~65 $0^{\circ}C$ over Ni deposited on SiO2, For the catalyst preparation, Ni was deposited to the thickness of 100-300A using effusion cell. Different approaches using porous materials and HF or NH3 treated samples have been tried for synthesis of carbon nanotubes. It is decisive step for synthesis of carbon nanotubes to form a round Ni particles. We show that the formation of round Ni particles by heat treatment without any pre-treatment such as chemical etching and observe the similar size of Ni particles and carbon nanotubes. Carbon nanotubes were synthesized by chemial vapour deposition ushin C2H2 gas for source material on Ni coated Si substrate. Ni film gaving 20~90nm thickness was changed into Ni particles with 30~90nm diameter. Heat treatment of Ni fim is a crucial role for the growth of carbon nanotube, High-resolution transmission electron microscopy images show that they are multi-walled nanotube. Raman spectrum shows its peak at 1349cm-1(D band) is much weaker than that at 1573cm-1(G band). We believe that carbon nanotubes contains much less defects. Long carbon nanotubes with length more than several $\mu$m and the carbon particles with round shape were obtained by CVD at ~$650^{\circ}C$ on the Ni droplets. SEM micrograph nanotubes was identified by SEM. Finally, we performed TEM anaylsis on the caron nanotubes to determine whether or not these film structures are truly caron nanotubes, as opposed to carbon fiber-like structures.

• 전자공학회논문지S
• /
• 제35S권10호
• /
• pp.11-18
• /
• 1998

최소대역폭 성질을 만족하고, 직류 성분을 지니고, 상태 독립적인 부호화 및 복호화가 가능한 2진 선로부호 MB46d BUDA 셀 기법을 응용하여 설계하였다. 설계된 선로부호 MB46d는 하나의 상태만 존재하므로 앞 상태에 무관하게 부호화할 수 있으며 데이터 메모리 용량이나 하드웨어가 간단하다. 또한, 최대 연속장이 8로 제한되어 있으므로, 수신 측에서 시각 정보를 많이 가져 자체 동기 기능을 가지며, 복호화 규칙이 매우 간단하며, 임펄스 응답 함수가 Raised cosine pulse인 시스템에서 최악의 경우에도 눈 모양이 크게 열려있으므로 어느 정도의 샘플링 지터가 존재하더라도 오류 없는 수신이 가능하다. 제안된 2진 선로부호 MB46d는 직류 성분성질을 제한하지 않은 반면에 고주파 성분을 더욱 억압하여 캐리어 파일럿 삽입 시 데이터 스펙트럼과 파일럿 사이의 간섭을 최소화 할 수 있다는 장점도 가지고 있다.