• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.92-94
• /
• 2008

The interest in permanent magnet synchronous motor is present in a wide area of applications, ranging from high-performance servo drive to line-start application[1]. The are mainly two reasons for this trend: first low rotor losses and second the foiling prices of high-energy magnets. In this paper the dynamic characteristic of the line-start permanent magnet synchronous motor are described and compared with those if the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bar in the line-start permanent magnet synchronous motor.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.50.4-51
• /
• 2015

Current and planned deep multicolor wide-area cosmological surveys will map in detail the spatial distribution of galaxies and quasars over unprecedented volumes, and provide a number of objects with photometric redshifts more than an order of magnitude bigger than that of spectroscopic redshifts. Photometric information is statistically more significant for studying cosmological evolution, dark energy, and the expansion history of the universe at a fraction of the cost of a full spectroscopic survey, but intrinsically carries a bias due to noise in the distance estimates. We provide convolution- and deconvolution-based algorithms capable of removing this bias -- thus able to exploit the full cosmological information -- in order to reconstruct intrinsic distributions and correlations between distance-dependent quantities. We then show some direct applications of our techniques to the VIMOS Public Extragalactic Redshift Survey (VIPERS) and the Sloan Digital Sky Survey (SDSS) datasets. Our methods impact a broader range of studies, when at least one distance-dependent quantity is involved; hence, they will be useful for upcoming large-volume surveys, some of which will only have photometric information.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.2
• /
• pp.88-93
• /
• 1981

The three force components of shear spinning are calculated by a newly proposed deformation model. The spinning process is understooed as shearing deformation arter uniaxial yuelding by ending, and shear stress .tau.$\sub$rz/ becomes .kappa. the yueld limit in pure shear, in the deformation zone. The tangential forces are calculated and then the feed forces and normal foeces are obtained by assuming a nuiform distribution of roller pressure on the contact surface. An optimum contact area is obtaned by minimizing the bending energy required to obtain the assumed deformation mechanism. The calculated forces are compared with experimental data form published literature and present experiments. Good agreement cetween calculated and experimental values for working forces is obtained over a wide range of process variables.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2011

A ribbed tube consumes more power to transport the fluid by comparing with flat one. After the tangential velocity component occurs, its contact area with the ribbed tube becomes large and it enables the effective energy transportation. The flow characteristics vary according to the geometry of tube rib. This study aims to investigate the flow characteristics of fluids working at Reynolds numbers of 20,000, 40,000, 60,000 and 80,000 with the air at $15^{\circ}C$ in the ribbed test tube high 1mm and wide 8.48mm. As the flow characteristics are included with the states of fully developed hydrodynamical region, axial velocity vector distribution and non-dimensional velocity distribution, they are shown with the physical validity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.668-671
• /
• 2009

This study seeks to develop a map of the domestic small hydropower(SHP) resources to further improve SHP resources, developed through package tool which can accurately evaluate a wide range of SHP basin in a short period of time. GIS-based package tool for SHP resources analysis was calculated using 840 standard basin classified by drainage area and facility capacity, etc., and to assume a 40% annual load factor, expected annual electricity production was calculated. SHP resources potential for the development of SHP will be utilized as basic data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.407-409
• /
• 2011

Wireless Sensor Networks "WSN" can be implemented in a wide range of applications. Some of these have unpredictable behavior, such as disaster or intrusion monitoring. Sudden large bursting amounts of data can increase traffic and degrade the WSN's performance as well as energy resources. In this work we propose an adjustment of radio transmission range where more or less nodes can be part of the neighborhood area and collaborate in retransmission. As simulation results prove, such adjustment based on traffic can benefit to balance network lifetime.

• Journal of the Korean Institute of Rural Architecture
• /
• v.2 no.1
• /
• pp.47-55
• /
• 2000

The purpose of this study was to analyze the housing form characteristics of Korean Chinese living around Chagbaek mountain in Chinese. The field survey of housing layout and form of houses and interview and observation methods were was used with the data which were obtained form literature and statistical materials of Chinese government. Their houses are called Guytle-house and their analysed characteristics are summarized as follows ; the housing plans are one room type and they tend to have wide site area, abundant storage spaces and efficient energy saving structure.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2992-2994
• /
• 2005

수십 센티미터 이내의 오차를 만족시키는 거리/위치판별 기능 및 저속 데이터 송수신 기능 구현을 주목적으로 발족된 저속 무선 개인영역 네트워크(LR-WPAN: Low Rate Wireless Personal Area Network)의 표준인 IEEE802.15.4a는 간단하고 경제적이며 전력 소모가 적은 송수신기 구조를 요구한다. 이에 본 논문에서는 PEWB(Parallel Energy Window Banks)를 이용한 독창적인 비동기(noncoherent) OOK(On-Off Keying) UWB(Ultra-Wide Band) 송수신기 구조를 제안한다. 또한 무선 다중경로 채널상황을 다소 극복할 수 있는 펄스와 비트 반복 기법을 사용한다. 제안된 송수신기의 잡음 특성 분석을 위해 chi-square 분포가 사용되며, 반복적 계산을 통해 얻어진 임계값을 적용하여 BER(Bit Error Rate) 성능을 분석한다.

• International journal of advanced smart convergence
• /
• v.5 no.1
• /
• pp.8-15
• /
• 2016

Studies have been made for the wireless sensor network protocols by a number of researchers to date. In particular, the studies as to the hierarchical protocol LEACH algorithm was concentrated. Various studies have been derived for the performance of the protocol is based on the LEACH protocol have been made. Improved algorithms have been proposed continuously. On the other hand, The performance comparison and evaluation of the improved algorithm is insufficient. Therefore, we compared the performance for the ML-LEACH (Multi Hop-Layered) and DL-LEACH (Dual Hop-Layered) been derived mainly LEACH. scalability, energy consumption, CH elected, network lifetime were selected as a Performance evaluation items.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.253-257
• /
• 2009

Along with emergence of recent issues such as 'minimization of energy consumption' and 'natural environment and human health' amid the flow of requirements for nature-friendly architecture, attempts for boundary, which has a variety of possibilities as the intermediate territory between interior and exterior space of the architecture, have been pursued actively. On the ground of close relationships between urban area and architecture in a modern society, the boundary between interior and exterior is being exhibited in a wide variety of way of expressions, not as a single plane any longer. In line with this, researcher analyzed interior and exterior boundary according to its type targeting modern housing complex in Europe, and also investigated characteristics thereof. And, having provided the results as basic materials in order to seek amenity of local apartment houses and diversification of housing plan as well, the researcher intends to be of a help to bring physical changes in both building and exterior design, and also to give a new meaning in an environment-friendly aspect.