• Journal of Korea Multimedia Society
• /
• v.17 no.12
• /
• pp.1461-1472
• /
• 2014

Recently, smart devices has been spreaded and the definition of RFID/USN(Radio Frequency Identification/Ubiquitous Sensor Network) technology has also extended. So, originally, human is an agent of communications but now, 'the things' are also an agent of communication. That is, Internet of Things(IoT). IoT is very big IT infra technology that is based on wire-wireless network technologies such as Bluetooth and Wi-Fi. However, in reality, IoT service that can provide various meaning and integrate smoothly is not appear yet. To solve these problems of IoT, we implemented Publish/Subscribe system, which operate in Zigbee based wireless sensor network by using MQTT-SN protocol. Moreover, this system can operate with combining MQTT system that is already existed in external Internet network so, extensibility and flexibility aspect is excellent. We show that possibility of IoT services that is combined between different heterogeneous network through the MQTT-SN.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1227-1230
• /
• 2005

최근 다양한 네트워크의 융합(Convergence) 추세에 따라 기존 PSTN 서비스도 인터넷에서 VoIP 형태로 제공이 되고 있다. 하지만 VoIP 서비스는 인터넷망을 이용하므로 부여된 발신번호 정보를 송출하지 않아 발신자의 위치 및 해당지역의 공공구조기관(PSAP)의 식별이 불가능하여 긴급서비스 지원을 위한 위치정보 제공을 못하는 문제점이 제기되었다. 최근 측위기술의 활용이 다양해지고 요구수준이 높아짐에 따라 실내에서의 신호 차폐 문제점을 극복할 수 있고, 높은 위치정확도 등을 제공하는 WLAN와 RFID 기술을 이용한 측위기술 연구가 활발하다. 따라서 본 논문에서는 Wi-Fi, RFID, GPS를 이용한 측위기술을 사용하여 무선이동통신 환경에서 VoIP 긴급서비스를 지원하기 위한 모델 제안과 각 구성요소에 대한 기능, 세부적인 지원 절차를 설명하고, 위치정보의 획득 및 처리를 위한 운용 시나리오에 관한 구체적 방안과 제안모델을 적용하기 위한 고려사항에 대한 분석결과를 제시한다. 그 결과 제안된 모델은 무선이동통신의 긴급서비스 설계시 적용이 기대된다.

• Convergence Security Journal
• /
• v.10 no.4
• /
• pp.21-30
• /
• 2010

Wireless network is one of the 2010's most important security issues. As smartphone is popularize, the number of Wireless Internet users is really growing and wireless AP spring up everywhere. But most wireless AP haven't being managed properly in terms of security, Wireless Internet users also don't recognize important of security. This situation causes grave security threats. This paper design and analyze a new cyber attack whose it circulates malware via QR code and activates Mobile AP to induce service charge. The new vulnerability we suggest forces to activate Mobile AP of smartphone based on Android and responds to all Probe Request are generated around, and brings induction of service charge and communication problems in its train.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.93-99
• /
• 2011

This paper proposes a novel network jitter estimation algorithm for robust VoIP communication system. The proposed method computes the current network environment mode using the differences of arrival time and generation time from sequential received packets. According to the current network environment mode, the jitter variance weights is adjusted to minimize the error for estimating the network jitter. The jitter average and variance are calculated by the autoregressive estimated algorithm, and then the network jitter is estimated by applying the jitter variance weights.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.97-103
• /
• 2014

Recently, digital door locks have been widely used as physical security devices for the door. Although they are convenient compared to the existing lock system, they have the problem of being opened by an electric shock. In this study, to improve safety, a method to hide the door-lock device inside and to display the door-lock on a user's smart-phone screen through the augmented reality is suggested. Furthermore, an additional function has been added which provides memo notes to facilitate communication among family members. The results of this study have been implemented by using motors to control locks, Wi-Fi shield, Arduino, and a virtually created door and showed desirable experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.758-765
• /
• 2008

Wide-spread deployment of infrastructure WLANs has made Wi-Fi an integral part of today's Internet access technology. WLANs suffer from degraded system throughput and each node's throughput fluctuates significantly in the saturation regime. In this paper, we propose a link layer traffic control mechanism which controls the offered load of DCF system. It is shown that the link layer traffic controller can improve DCF system throughput and reduce nodes' throughput fluctuation with properly controlled offered load. We propose a dynamic traffic control algorithm which can find an optimal offered load and show its performance improvement with ns-2 simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.113-118
• /
• 2012

In this paper, we discuss the design of the Digital Down Converters for the IEEE 802.11 wireless LAN receiver, which can be used for the customized receiver. The customized receiver can be used for special puropsed services which cannot be realized using the general custom chip. In the OFDM receiver, DDC receives the up sampled Inphase/Quadrature signal from the AD converter and process down sampling and filtering procedures using the Cascaded Intergrator Filter and FIR filters. We discuss the structure and design methodology of DDC's and analyze the simulation results.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.632-637
• /
• 2017

Even though the potential for an accident in nuclear power plants is very low, multiple emergency plans are necessary because the impact of such an accident to the public is enormous. One of these emergency plans involves a robotic system for investigating accidents under conditions of high radiation and contaminated air. To develop a robot suitable for operation in a nuclear power plant, we focused on eliminating the three major obstacles that challenge robots in such conditions: the disconnection of radio communication, falling on uneven floors, and loss of localization. To solve the radio problem, a Wi-Fi extender was used in radio shadow areas. To reinforce the walking, we developed two- and four-leg convertible walking, a floor adaptive foot, a roly-poly defensive falling design, and automatic standing recovery after falling methods were developed. To allow the robot to determine its location in the containment building, a bar code landmark reading method was chosen. When a severe accident occurs, this robot will be useful for accident condition monitoring. We also anticipate the robot can serve as a workman aid in a high radiation area during normal operations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.77-82
• /
• 2019

In this paper, a 0.6~6GHz quad-ridge horn antenna which can be used for the antenna measurement of 5.8GHz WiFi system from lowest frequency band of mobile LTE (Long Term Evolution) is designed and implemented. The quad-ridge horn antenna has quadruple ridges of exponential function, a back-short and a cavity. Based on this structure, we design the cavity size, ridge gap and feed gap to have broadband characteristics. For implementation, the plates material of aluminum and copper are used for the horn and four ridges, respectively. And the insulator supports are used to maintain the gap between ridges. By measurement, antenna has the gain of 6.2~13.35dBi with the return loss of less than -6dB (under VSWR 3 : 1) in the entire design band. The results of this study can be widely used to the antenna studies on the mobile communication including low frequency band of LTE, the EMI measurement and the standard calibration measurement.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.79-87
• /
• 2014

In this paper, we implemented the HearCAM platform with Raspberry PI B+ model which is an open source platform. Raspberry PI B+ model consists of dual step-down (buck) power supply with polarity protection circuit and hot-swap protection, Broadcom SoC BCM2835 running at 700MHz, 512MB RAM solered on top of the Broadcom chip, and PI camera serial connector. In this paper, we used the Google speech recognition engine for recognizing the voice characteristics, and implemented the pattern matching with OpenCV software, and extended the functionality of speech ability with SVOX TTS(Text-to-speech) as the matching result talking to the microphone of users. And therefore we implemented the functions of the HearCAM for identifying the voice and pattern characteristics of target image scanning with PI camera with gathering the temperature sensor data under IoT environment. we implemented the speech recognition, pattern matching, and temperature sensor data logging with Wi-Fi wireless communication. And then we directly designed and made the shape of HearCAM with 3D printing technology.