• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.12
• /
• pp.2272-2293
• /
• 2011

Communication technology of future networks is predicted to provide a large variety of services including WiFi service in vehicular network. In this paper, we assume that vehicles are embedded with WiMAX antenna and in-vehicle terminals receive WiMAX traffic through WiFi interface. This assumption will impose severe performance degradation due to interference among mobile BSSs when WiFi access points (APs) are densely located. Existing interference avoidance techniques cannot properly resolve the above problems and do not cope with dynamically moving vehicular scenario since they focus only on the fixed network topology. In this paper, we propose a mobility-aware interference avoidance scheme for WiFi services. The proposed scheme computes the interference duration by exploiting mobility vector and location information of neighboring APs. If the interference duration is not negligible, our scheme searches for another channel in order to avoid interference. However, if the interference duration is negligible, our scheme continues to use the channel to reduce switching overhead. To measure the effectiveness of the proposed scheme against other existing techniques, we evaluated performance by using OPNET simulator. Through the simulation, we obtained about 60% reduction in the maximum interference frequency and about 67% improvement in throughput. Furthermore, our scheme provides fair channel usage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1472-1480
• /
• 2016

When disasters such as earthquake, flood, typhoon, fire and terrorism are occurred a video management system is required which can shoot video on the disaster site, and send it to a server located in the command center that can grasp at a glance the site conditions. In this paper, to know the performance elements information needed to construct the video management system. we presented a method of configuring an ad hoc network based on Wi-Fi direct communication. And we also evaluated the performance through built of environment for the video management system. The evaluated performance test items are 'packet flow tests according to the video compression ratios and the image sizes', 'packet flow tests according to the distance and traffic tests', 'packet flow tests according to whether LOS or not', and 'performance test of scenarios'.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.99-103
• /
• 2009

Recently, as wired and wireless communication services have rapidly developed and multimodal mobile devices which have various characteristics have widely spread, the need for new convergence services increases. The growing population of VoIP technologies and the high communication expense yield that the market of IP based telephony such as WiFi phone and IP phone is substituted for one of the conventional PSTN telephony. With the help of this trend, the wireline network operators desire to find a market in mobile networks. Therefore, they focus on Fixed Mobile Convergence (FMC) service as one of the key factors to accomplish this goal. FMC services are able to provide the mobility of voice services between circuit switched and packet switched networks. IP Multimedia Subsystem (IMS) based Voice Call Continuity (VCC) is one of the schemes to embody FMC services. As Application Server (AS) which has this VCC function provides seamless handover of services between heterogeneous networks, FMC subscribers can communicate seamlessly with others m WiFi domain and COMA domain using WiFi-COMA dual phone. Most of enterprises have already introduced IP network infrastructure and IP-PBX (Private Branch eXchange) for telephony. However, the problems of high communication cost and work inefficiency due to frequent outside jobs or business trips have remained. In order to solve these problems, demands for enterprise FMC services increase. In this paper, we introduce a new IP-PBX based VCC model that can provide seamless handover of voice services between WiFi and COMA networks for enterprise users and we investigate some interworking and security issues between Soft Switch (SSW) and IMS, or between IMSs. In addition, we introduce a new service that can provide the continuity of voice sessions as well as video sessions using Multimedia Session Continuity (MMSC) technology which has evolved from VCC. This service is expected to be one of the next-generation personalized services based on user's context.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.1-16
• /
• 2013

Smartphones and tablets including phone, calendar are the necessities of modern man. They are one of the MN(Mobile Node), each with wireless network capabilities. Necessities of modern human MNs are almost included cellular module available in LTE/3G and Wi-Fi module for high-speed Internet. Until now, MN mobility management is handled, but using network-based mobility management in this paper. Then, carriers can manage and maintain the network for low-cost. In addition, it was considered that use a lot of modern people with Wi-Fi and LTE/3G, and using Cross-Layer-Based handoff.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.172-178
• /
• 2023

In this paper, performance of autoencoder based OFDM communication systems is compared with IEEE 802.11a Wireless Lan System (Wi-Fi). The proposed autoencoder based OFDM system is composed of the following steps. First, one sub-carrier's transmitter - channel - receiver system is created by autoencoder. Then learning process of the one sub-carrier autoencoder generates constellation map. Secondly, using the plural sub-carrier autoencoder systems, parallel bundle is configured with inserting IFFT and FFT before and after the channel to configure OFDM system. Finally, the receiver part of the OFDM communication system was updated by re-learning process for adapting channel condition such as multipath channel. For performance comparison, IEEE802.11a and the proposed autoencoder based OFDM system are compared. For channel estimation, Wi-Fi uses initial long preamble to measure channel condition. but Autoencoder needs re-learning process to create an equalizer which compensate a distortion caused by the transmission channel. Therefore, this autoencoder based system has basic advantage to the Wi-Fi system. For the comparison of the system, additive random noise and 2-wave and 4-wave multipaths are assumed in the transmission path with no inter-symbol interference. A simulation was performed to compare the conventional type and the autoencoder. As a result of the simulation, the autoencoder properly generated automatic constellations with QPSK, 16QAM, and 64QAM. In the previous simulation, the received data was relearned, thus the performance was poor, but the performance improved by making the initial value of reception a random number. A function equivalent to an equalizer for multipath channels has been realized in OFDM systems. As a future task, there is not include error correction at this time, we plan to make further improvements by incorporating error correction in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1138-1143
• /
• 2013

In this paper, we propose a smartphone application based on a wireless fidelity(WiFi) in order to control the charging of electric vehicle(EV) and monitor the charging status together with the vehicle history information. The driver obtains much information on vehicle status through a smartphone application which communicates with the electric vehicle supply equipment(EVSE) management server while the EV also communicates with the EVSE for the authentification through controller area network(CAN). We also implement the simulator for the EV charging control system to verify the functions of the proposed application where the simulator consists of an EV model, an EVSE, and a smartphone. It is shown by the simulator that the proposed smartphone application allows the driver to control and to monitor the charging process of an EV conveniently and, moreover, it can provide the driver with vehicle information stored in the EVSE management server.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.589-590
• /
• 2010

Recently, as various smart phones released smart phones are becoming popular.Accordingly, the growing interest in mobile information service or advertising serviece, and attention has been concentrated in the mobile environment. These servieces should be carried out smoothly in the all situation (cannot access mobile Wi-Fi networks and 3G services), and should have the uniqueness that is fit for purpose. In this papaer, module for a particular purpose of the foundation of specialized location-based map services was implemented using a Packing R-tree by using a GIS engine based on Microsoft Window Mobile and Android operating system without communication device like 3G or Wi-Fi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1343-1349
• /
• 2014

Recently feature phones are being replaced by smartphones. Because smartphones have various sensors, there are many applications and research works that utilize them. Very few feature phones have GPS modules but all smartphones are equipped with a GPS sensor. One of the hot issues for smartphone research and development is point interest research. In this paper, we will develop an application which protects children using GPS and WiFi.. If a child gets out of the interest-area which is established by parents or guardian, our system sends them messages.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.123-129
• /
• 2017

In this paper, we proposed a smart multiple-tap system which a remote user with smartphone can control multiple-taps in order to reduce standby-power consumption more conveniently when plugged-in electric appliances are turned-off. Recently, several researches of smart multiple-tap using IoT technology has reported. However, in these researches, an additional device like as a server computer is necessary, or multiple-taps could be only remotely controlled by smartphone and not directly controlled by on/off switch. The proposed smart multiple-tap system does not need any additional device only if it has a WiFi router, and it can be used for user as well as remote control using smartphone application and physically direct control using contact switches like existing multiple-taps. Our approach is to develop a smart multiple-tap device capable of WiFi communication can each serve as a server or a client, and can be operated by the hybrid switch combining the on/off contact switch and the relay switch. We implemented the prototype of the proposed system composed of the smart multiple-tap device and the smartphone application, and the test of the prototype validates the proposed system.