• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.46-54
• /
• 2007

The purpose of this study was to examines the burning rate of fire retardant treated wood in the cone heater with a one-dimensional integral model. The wood samples used in this study were four species. The species of woods are Redwood, White oak, Douglas fir and Maple. Each sample was nominally 50mm thick and 100mm square. Samples were exposed to a range of incident heat fluxes 10 to $35kW/m^2$ using the cone heater. A one-dimension integral model has been used to predict burning rate, heat of gasification, flame heat fluxes, charring rate and char depth of samples. As a result measurement of mass loss rate, softwoods(Redwood and Douglas fir) has relatively low value than those for hardwoods(White oak and Maple). Average charring rate of woods in case of fire retardant treatment showed reduction effect of 41.29%, 50.00%, 48.18% and 60.82% for Redwood, Douglas fir, White fir and Maple, respectively. Almost all the predictions from integral model showed faster charring than those measured. Average difference between predictions and experimental data was 16%, 9.5% and 11.8% for N, F1 and F2 respectively. Water-soluble fire retardant used in this study find out more effect in hardwood than softwood from the result of measurement of mass loss rate and average charring rate.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.86-92
• /
• 2004

We tested five specimens of each species at each of five constant external heat flux levels (10, 15, 20, 25. and 35㎾/㎡). An Cone heater was used to expose the wood specimens to the heat flux. The 100-by 100-by 50-㎜ specimens were of four species: Redwood, White oak, Douglas fir, Maple. In result of test, charring of wood exposed to a constant external heat flux can be considered a linear with function of time. As compared with the charring rates Redwood is most rapidly, but on the other hand Douglas fir is most slowly. When the external heat flux is 35㎾/㎡, the charring rate is rapidly about twice then 10㎾/㎡. Using the Equation (2), the estimates for u were 1.02, 1.16, 1.23, 1.32, and 1.44 for the 10, 15, 20, 25, and 35 kw/m2 constant external exposure levels, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.61-71
• /
• 2000

The effect of the treatment with CCFZ, FR-4, and PEG400 from butt end on the dimensional stability and bending properties was examined. Three softwood species such as red pine, Korean white pine and Japanese larch and three hardwood species such as poplar, alder and oak were investigated in this research. Shrinkage of red pine, Korean white pine, poplar, and alder treated with PEG400 decreased. However, there was no significant decrease of shrinkage in Japanese larch and oak. The decrease of shrinkage when moisture content changed from about 20% to 10% was larger than that at any other phase. In regard to the effect of treatment on bending properties, bending MOE and MOR of all specimens treated with PEG400 decreased significantly. Especially in the case of red pine, poplar, and alder treated with PEG400, bending MOR reduced 9%, 14%, and 12%, respectively. Reductions of MOR of the hardwood was also much larger than that of the softwood. However, in all species, treatment with CCFZ and FR-4 did not affect the change of bending MOE and MOR significantly. Comparing the large specimen which also included heartwood with the small specimen which included only treated sapwood, there was a difference in the change of bending MOE and MOR between them. The large specimens of Korean white pine, alder and Poplar, which had a relatively low proportion of sapwood(18~22%), showed the decrease of MOR by 11~13% more than that of small specimens, while red pine, Japanese larch and oak, which had a relatively high proportion of sapwood(35~40%), showed little decrease. It means that bending MOE and MOR of structural wood treated from butt end should be considered in terms of sapwood proportion as well as effect of treated chemicals.

• Korean Journal of Agricultural Science
• /
• v.28 no.2
• /
• pp.125-131
• /
• 2001

Trametes versicolor(CV5) selected as a white-rot fungus with strong lignin degrading activity, in the previous paper, was investigated on a properties of degradation of wood lignin. Lignins of hardwoods, especially oak(Querous acutissima carruth) an paulownia (Paulownia coreana Uyeki) were considerably delignified by the CV5, however, softwoods used in this experiment were not delignified. Bavendamm's reaction was positive with several phenols on agar plates for the confirmation of a phenoloxidase secreted Through the morphologies of decayed wood chip observed with the aid of scanning electron microscopy, it was found that the hypha of CV5 penetrated the ray cells and vessels caused separation of the wood cellulose.

• Journal of the Korean Arthroscopy Society
• /
• v.5 no.2
• /
• pp.85-91
• /
• 2001

Purpose : The purpose of this study was to determine the clinical outcome of meniscal repairs according to tern location and combined injury. Materials and Methods : From 1994, 73 meniscal repairs were underwent by arthroscopy and followed more than 1 year. The locations of torn meniscus were 29 red-red Bone, 36 red-white zone, 8 white-white zone. Twenty-six patients also had combined lesion including ACL injury 17 cases and treated simultaneously. Clinical result was evaluated by OAK system. Result : Healing rates(above good) were $94\%$ in isolated injury and $88\%$ in combined injury, especially $94\%$ in ACL injury. The result according to tern location were $90\%$ in red-red zone, $91\%$ in red-white zone, all in white-white zone. Conclusion : Meniscus tear with ACL injury should be repaired by arthroscopy, simultaneously. The meniscal tear of white-white zone could be healed by arthroscopic meniscal suture.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.259-263
• /
• 2017

In this study, we investigated the morphological characteristics and antioxidant ability of mushroom cultivar Lentinula edodes 'Nongjingo' fruiting bodies after exposure to various light conditions. Color differences between mushrooms treated with mixtures of LED light revealed that mushrooms displayed lighter color shades when compared to the control group (fluorescent light treated mushrooms). Redness increased and yellowness decreased after exposure to all treatments other than the fluorescent control. Measurement of growth characteristics of 'Nongjingo' fruiting bodies showed increases after exposure to all mixed LED treatments. In addition, the uniformity of fruiting bodies was higher when using LED light compared to fluorescent light. The measurement of stem diameters did not show a significant difference between the treatments, however, diameters were slightly larger with exposure to white-green LED. Moreover, stem length was longer in the mixed LED treatments when compared to those exposed to fluorescent light. Examination of the ratio of stem diameter to stem length revealed that the diameter of the stem was greater than the length. The antioxidant activity of water extracts made from Nongjingo fruiting bodies grown under mixed LED conditions was compared to those from mushrooms grown under fluorescence light conditions. The highest antioxidant activity was observed from mushrooms treated with white LED; however, no significant difference was found between mushrooms exposed to white-green LED compared to white-blue LED. The treatment showed higher antioxidant ability than vitamin C. Our results confirm that treatment of white LED and white-blue LED affects the growth and antioxidant ability of Nongjingo mushroom fruiting bodies.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.97-97
• /
• 2002

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.30-36
• /
• 1994

Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.103-112
• /
• 2016

To compare seed components of plus trees, seed powder ground after seedcoat removal was analyzed for two oak species, i. e., Quercus monglica (white oak) and Quercus variabilis (red oak), which are typical oak trees in Korea but have different fruiting characteristics. Thus we aimed at analyzing and comparing many ingredients including minerals, sugars, etc. Two species were similar to each other in the content of water, crude ash, crude protein and carbohydrates, but crude lipid content in Q. variabilis was 2.5 times higher than that in Q. mongolica. Crude proteins of Clone 124 was 1.5 times higher than that of Clone 75 in Q. mongolica. Crude lipid content showed the highest value in Clone 0511 of Q. variabilis, and more phosphate and iron was found in Q. monglica than in Q. variabilis. Glucose showed 85.4% and 88.3% on average of the total monosacchrides in two species, and galactose and arabinose were also found. In the content of phosphate, iron, and crude lipid, differences were found between two species and among clones of two species.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.130-135
• /
• 2007

An on-line real time grading and sorting system for dried oak mushrooms was developed for on-site application. Quality grades of the mushrooms were determined according to an industrial specification. Three dimensional visual quality features were used for the grading. A progressive color computer vision system with white LED illumination was implemented to develop an algorithm to extract external quality patterns of the dried oak mushrooms. Cap (top) and gil (stem) surface images were acquired sequentially and side image was obtained using mirror. Algorithms for extracting size, roundness, pattern and color of the cap, thickness, color of the gil and amount of rolled edge of the dried mushroom were developed. Utilizing those quality factors normal and abnormal ones were classified and normal mushrooms were further classified into 30 different grades. The sorting device was developed using microprocessor controlled electro-pneumatic system with stainless buckets. Grading accuracy was around 97% and processing time was 0.4 s in average.