• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1564-1565
• /
• 2007

In comparison with CCFL, LED can have more various colours. The research into BLU to raise colour reproducibility is actively proceeding by using RGB LED. On this study, Direct BLU was designed by white LED and RGB LED. According to the result of the experiment, the colour uniformity degree of BLU model using white LED is better than RGB LED BLU. On the other hand, the colour reproducibility of RGB LED BLU is better than white LED. The research showed that the uniformity of white LED is 81.7%and RGB LED is 70.01%.

• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.67-70
• /
• 2007

A Wide Color Gamut Backlight system was studied using a three-band white Light-Emitting Diode. A three-band white light-emitting diode (LED) was fabricated using an InGaN-based blue LED chip that emits 445-nm blue peak, and a green phosphor and red phosphor that emit 535-nm green and 621-nm red peak emissions, respectively, when excited by 450-nm blue light. Using for this three-band white LED, wide color gamut backlight unit (BLU) was attained. The luminance of BLU and CIE 1931 chromaticity coordinates was $1,700Cd/m^2$ and (0.337, 0.346). Color filter matching simulations for this configuration show that the three-band white LED backlight can be enhanced by up to 16% over conventional white LED backlight color gamut.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.17.1-17.1
• /
• 2011

Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as a type of implantable LED biosensor and as a therapy tool.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1156-1159
• /
• 2008

Local dimming driving has advantages in reducing power consumption and improving contrast ratio(CR). In an LED backlight unit(BLU), many small LED blocks are implemented in 2-dimmensional space, and luminance of the blocks is controlled by a local dimming algorithm. However, such a BLU can induce various recognizable artifacts. A new novel algorithm is proposed for exact block luminance calculation to correct local dimming artifacts. Also we discuss modified low-gray-level dimming to achieve much aggressive power saving in a local dimming BLU system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.140-142
• /
• 2011

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.95-96
• /
• 2007

저전압 고휘도 광원으 BLU에 효과적으로 응용되고 있는 백색 OLED를 다색 발광층 적층법을 이용하여 제작하고 만들어진 cell의 전기적 광학적 특성을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1349-1349
• /
• 2008

The applications of white LEDs has been expanded from mobile phone to LCD TV as a backlight source recently and now are penetrating into the lighting market. With these changes new requirements for LEDs phosphors are demanded. In this point of view recent technology trend of phosphors for LCD backlight and lighting will be discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1419-1421
• /
• 2007

Color conversion technology using unique color conversion film for OLED back light was developed to achieve renovative performance for high- end display. It can reduce the production cost more than 20% due to cheaper cost for blue OLED and conversion film and also has a free chromaticity control capability for 10% raising color gamut with respect to LCD color filter. The OLED BLU by color conversion technology also shows excellent performances such as chromaticity stability. White efficiency using PLF + Blue OLED is 17cd/A@4.4V, CIExy(0.29, 0.31).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.