• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.529-538
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured wheel load data in transition curve track, and then evaluated probability the range of wheel load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of wheel load by occured a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation (${\Delta}8{\sim}13kN$). Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation (${\Delta}25{\sim}28kN$) by changed of cant.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.701-708
• /
• 2007

기존선 속도향상을 위해 개발된 틸팅열차는 기존열차에 비하여 승차감의 저하 없이 곡선부를 더욱 빠르게 주행할 수 있기 때문에 전체 운행시간을 단축시킬 수 있는 장점이 있다. 그러나 일반적으로 주행열차에 의해 궤도에 발생하는 힘은 주행속도의 함수로 표현되므로 주행속도가 증가하는 만큼 궤도가 부담해야할 힘의 크기도 증가하게 된다. 따라서 본 연구에서는 틸팅차량의 기존선 곡선부 주행 시 내 외측 레일의 탈선계수를 산정하여, 곡선반경 증속 여부, 선로개량 유 무에 따른 주행안정성을 평가하였으며, 기존에 운행중인 일반열차와 고속열차의 주행안정성을 비교, 분석하였다. 연구결과, 측정대상 구간에서 측정된 동적 윤중을 이용하여 산출한 동적 윤중 감소량은 차체진동을 고려한 차량 전복에 대한 동적윤중 감소한계치를 모두 만족하는 것으로 나타나 향후 틸팅차량 투입시 대상구간에서의 윤중 감소에 따른 열차탈선의 위험은 없을 것으로 판단된다.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.396-404
• /
• 2009

고속열차의 개발과 함께 구름접촉피로에 의한 레일의 피로균열 및 피로파괴에 대한 연구를 통해 주행안정성을 확보할 수 있는 방안 마련이 필요하다. 따라서 본 연구에서는 Eisenmann의 근사계산식(실용식)을 이용하여 속도, 차륜반경, 궤도지지강성, 침목간격, 축중, 궤도품질에 따른 레일내부 발생응력을 검토하였다. 또한, 유한요소해석을 통해 초기균열의 길이 및 각도, 온도에 따라 레일두부에서 발생하는 전단응력을 검토하여 모드별 응력확대계수를 도출하였다. 이로써 고속철도 레일의 피로수명에 영향을 미치는 주요인자들을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.316-321
• /
• 2003

The railroad is a means of large transportation which has many talents such as a safety and a regularity. That is a results from various confidential performance tests and evaluations of the system. The railroad system consist of various subsystems - vehicle, power supply, signal, communications, track structures, operations, etc. Among them, as an item of safety evaluation there is a measurement of wheel/rail force, so called a measurement of derailment coefficient. This is a very important item because a derailment of a train will bring about a big accident. Especially it is more important in high speed rail of which operation speed is over two times as fast as existing rail. In this paper, it is introduced to preprocess the wheelset for measuring wheel/rail force of high speed rail, such as to treat a measuring wheelset, adhesion of strain gauges and static load test, running test result of main line.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.491-501
• /
• 2021

A difference in subgrade settlement between two rails of a track manifests as lateral differential subgrade settlement. This settlement causes unsteadiness in the motion of trains passing through the corresponding area. To illustrate the effect of lateral differential subgrade settlement on the dynamic response of a vehicle-track coupling system, a three-dimensional vehicle-track-subgrade coupling model was formulated by combining the vehicle-track dynamics theory and the finite element method. The wheel/rail force, car body acceleration, and derailment factor are chosen as evaluation indices of the system dynamic response. The effects of the amplitude and wavelength of lateral differential subgrade settlement as well as the driving speed of the vehicle are analyzed. The study reveals the following: The dynamic responses of the vehicle-track system generally increase linearly with the driving speed when the train passes through a lateral subgrade settlement area. The wheel/rail force acting on a rail with a large settlement exceeds that on a rail with a small settlement. The dynamic responses of the vehicle-track system increase with the amplitude of the lateral differential subgrade settlement. For a 250-km/h train speed, the proposed maximum amplitude for a lateral differential settlement with a wavelength of 20 m is 10 mm. The dynamic responses of the vehicle-track system decrease with an increase in the wavelength of the lateral differential subgrade settlement. To achieve a good operation quality of a train at a 250-km/h driving speed, the wavelength of a lateral differential subgrade settlement with an amplitude of 20 mm should not be less than 15 m. Monitoring lateral differential settlements should be given more emphasis in routine high-speed railway maintenance and repairs.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.535-544
• /
• 2011

레일 표면 결함이 발생할 경우 매우 높은 충격하중이 발생하여 레일 피로 진전 또는 레일 파단에 이를 수 있고 레일이 파단될 경우 열차탈선 등 대형 사고가 발생할 수 있으므로 레일 결함부에 대한 관리기준의 정립이 매우 중요하다. 본 연구에서는 차량-궤도 동적 상호작용 해석 프로그램을 이용하여, 실제 고속철도 자갈궤도에서 결함이 발생한 43개 지점에서 측정된 레일요철을 입력값으로 하여, 요철 깊이에 따른 충격 윤중과 레일 휨응력을 산정하였다. 궤도틀림을 감안하여 윤중 및 레일 휨응력의 한계값을 설정하고, 해석결과로부터 얻은 윤중 및 레일 휨응력 최대값과 결함 깊이 및 폭과의 상관관계를 분석함으로써 레일 표면 결함부에 대한 관리기준을 제시하였다. 분석 결과, 허용할 수 있는 요철 깊이는 충격 윤중에 의하여 발생할 수 있는 레일 두부의 소성 변형을 방지하기 위하여 관리되어야 하며, 엄격한 조건을 평가할 경우 그 값은 0.2mm 정도가 적당함을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.349-356
• /
• 2001

The dynamic behavior of high speed train is very Important because the railway should be safe and Is satisfied tilth the rode comfort of passengers. The train is composed of many suspension components. such as 1st springs, 1st dampers, 2nd springs and 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes, the track conditions and geometry and many environmental factors, such as rain, snow and wind. affect the dynamic behavior of high speed train. This paper reviews the effect of wind and track conditions on the dynamic behavior of high speed train. The VAMPIRE program Is used for this simulation. The result of simulation shows that the high speed train should not be operated when the wind velocity is beyond 34.5 m/sec.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.365-372
• /
• 2010

Station is an important building in high-speed railway, and its vibration and noise may significantly affect the comfort of waiting passengers. A coupling vibration model for train-structure system is established to analyze and evaluate the vibration level of a typical waiting hall under dynamic train load. The motion of a four-axle vehicle with two suspension system is modeled in multi-body dynamics with linear springs and dampers employed. The station is modeled as a whole finite element structure which is 113 m in longitudinal and 163.5 m in lateral, and the stiffness of the station foundation is considered. According to the assumptions that both wheel and rail are rigid bodies and keep contact to each other in vertical direction, and the wheel/rail interaction and displacement coordination in horizontal direction is defined by the simplified Kalker creep theory, the vehicle spatial vibration model has 27 degrees-of-freedom. An overall analysis procedure is made of the train moving through the station, by which the dynamic responses of the train and the station are calculated. According to the comparison between analysis and test results, the actual connection status between different parts of the station is estimated and the vibration level of the waiting hall is evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.953-958
• /
• 2007

To assess the derailment safety of the Samaeul Train, We developed a fleet analysis model and carried out sensitivity analysis of the variables related to derailment factors with ADAMS/Rail computing analysis method. Depending on the variation of the running speed in curve section, derailment coefficient and wheel load reduction rate are high at right side wheels in slow running speed section and low at left side wheel in high running speed. According to decreasing the radius of curve, derailment coefficient and wheel load decreasing rate are increased. Derailment coefficient is proportional to transition curve length and wheel load decreasing rate is constant. Cant value rising causes wheel load deduction rate rising.

• Wind and Structures
• /
• 제20권2호
• /
• pp.143-168
• /
• 2015

A numerical model for analyzing air-train-track interaction is proposed to investigate the dynamic behavior of a high-speed train running on a track in crosswinds. The model is composed of a train-track interaction model and a train-air interaction model. The train-track interaction model is built on the basis of the vehicle-track coupled dynamics theory. The train-air interaction model is developed based on the train aerodynamics, in which the Arbitrary Lagrangian-Eulerian (ALE) method is employed to deal with the dynamic boundary between the train and the air. Based on the air-train-track model, characteristics of flow structure around a high-speed train are described and the dynamic behavior of the high-speed train running on track in crosswinds is investigated. Results show that the dynamic indices of the head car are larger than those of other cars in crosswinds. From the viewpoint of dynamic safety evaluation, the running safety of the train in crosswinds is basically controlled by the head car. Compared with the generally used assessment indices of running safety such as the derailment coefficient and the wheel-load reduction ratio, the overturning coefficient will overestimate the running safety of a train on a track under crosswind condition. It is suggested to use the wheel-load reduction ratio and the lateral wheel-rail force as the dominant safety assessment indices when high-speed trains run in crosswinds.