• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.152-159
• /
• 2020

This study reviews the rear or tag axle steering system's concepts and technology applied to commercial vehicles. Most commercial vehicles are large in size with more than two axles. Maneuvering them around tight corners, narrow roads, and spaces is a difficult job if only the front axle is steerable. Furthermore, wear and tear in tires will increase as turn angle and number of axles are increased. This problem can be solved using rear axle steering technology that is being used in commercial vehicles nowadays. Rear axle steering system technology uses a cylinder mounted on one of rear axles called a steering cylinder. Cylinder control is the primary objective of the real axle steering system. There are two types of such steering mechanisms. One uses master and slave cylinder concept while the other concept is relatively new. It goes by the name of smart axle, self-steered axle, or smart steering axle driven independently from the front wheel steering. All these different types of steering mechanisms are discussed in this study with detailed description, advantages, disadvantages, and safety considerations.

• 복식
• /
• 제22권
• /
• pp.205-224
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the thirty pictures of Bud-dha to hang on the wall among the existing Buddist paintings. The costume to study were made about 64 years during the King Chung-yol(1286) to the King Chung-jong(1350) which style was mostly related in Won Dynasty. 가) Men's wear ; 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan Kun and Mo. The young boys binds his hair up one, two, and three knot-s, and tied up with a hair ribbon, A kinds of Kuan-mo were Mine-lu-kuan Yuan-yu-kuan, Nong-kuan, Hae-chi-kuan Pok-du Yun-wha-kuan Yip-mo- and Tu-ku(Helmeto) 2. clothes ; 1) Colour of Koryo King's Mien-ku Kuan costume was not agree with blue and reddish black colour which was used in Yo, Song, Kum and Won Dynasty, however black and greenhish blue colour was agreed with. 2) The king wore T'ung-t'ien-kuan(Yuan-yu-kuan) and the government officials wore Chin-hien-kuan Hae-chi-kuan and Nong-kuan as a court dress. In general the king and the Crown Prince wore a hats which was used in T'ung-t'ien system however sometimes they wore small hats which was cited in literature. 3) Gate guard and upper garment wore colourful costume figured gold colour pattern which was distin-gtive costume system of Koryo. 4) A monk wore big sleeve long skirt big sleeve long jacket long skirt and shoulder scar-f full shoulder scarf or right hand shoulder opened scarf. 5) The Soldiers wore helmet shoulder or scarf pee-back hung-kap, pok-kap, yang-dan-g-kap we-yu-kap kun-kap, and boots and they carried arms. 6) The young boys wore scarf, loin cloth, long skirt, belt neckless, wan-silk, boots and foots wear and wristless. 나) Women's wear ; 1. Hair style and hairs and tied up with a hair ribbon and wore precious ston decorated hair dress wheel shape hair dress pan shaped head dress handkerchif covered hair dress decorated precious stone hair pin silk chippon made of head dress muf-fler shaped hairdress. Boots mocasin hae lee, suk and sandle wored as a shoes depends on the classes. They wore neckless, earing wres-tless and wan-pu-sik. 2. Closthe 1) High rank lade's wore un-kyun attached jacket and jacket sleeves decorated pleats and pleats decorated long skirt apron back apron knot belt, scarf this type is the same with Dang Dynasty five dynasty of china Song, Kum Won, Myung Dynasty and our cos-tume of Poe-hae, and Shilla Dynasty.

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.645-649
• /
• 2010

고주파열처리(induction hardening)는 엔진의 구동력을 차동장치에서 바퀴까지 전달해주는 부품인 액슬축(axle shaft)의 비틀림 강도를 증가시키기 위해 적용되는 열처리 방법이다. 고주파 열처리 과정의 급속가열과 급속냉각은 소재에 잔류응력과 물성치를 변화시켜 액슬축의 허용 전달토크를 변화시킨다. 본 연구에서는 고주파 열처리한 액슬축의 잔류응력의 분포와 열처리 깊이에 따른 비틀림 강도 변화를 열물성 및 상변태를 고려한 유한요소 해석을 통해 예측하였으며 이를 시험과 비교하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.397-397
• /
• 2016

Triboelectric nanogenerators (TENG) can produce power from ambient mechanical sources and have strong points of high output performance, light weight, low cost, and easy manufacturing process. It is expected that TENG can be utilized in the fields of wireless electronics and self-powered devices in the world which pays attention to healthcare and the IoT. In this work, we focus on scavenging ambient rotational energy by using a durably designed TENG. In previous studies regarding harvesting rotation mode energy, the devices were based on sliding mechanism and durability was not considered as a major issue. However friction by rotation causes reliability problems due to wear and tear. Therefore, in this study, we convert rotary motion to linear motion utilizing a cam by which we can then utilize contact-mode TENG and improve device reliability. In order to increase output performance, bumper springs were used below the TENG and the optimum value for the bumper spring constant was analyzed theoretically. Furthermore, the inserting a soft substrate was proposed and its effect on high output was determined to be due to an increase in the contact area. By increasing the number of cam noses, the output frequency was shown to increase linearly. For the purpose of maximum power transfer, the input impedance of the device was determined. Finally, to demonstrate the use of the C-TENG as a direct power source, it was installed on a commercial bicycle wheel and connected to 180 LEDs. In conclusion we present a rotational motion TENG energy scavenger system designed for enhanced durability and optimized output by appropriate choice of spring constants and substrate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.430-436
• /
• 2008

Recently, there are many cases to use a ship's engine performance analyzer(SEPA) to measure pressure in cylinder and top dead center(TDC) of piston of engine, and analyze its performance such as fuel injection time and horsepower as well as wear of piston ring. But, SEPA needs TDC pulses($T(1){\sim}T(n)$) generated when pistons of engine are located to the TDC position ($TDC(1){\sim}TDC(n)$), these pulses are gathered from sensors connected to gear wheel of the propeller shaft in the remote distance from the measurement point. Therefore, operators need a long wire cable(WRC) to TDC detecting sensor to get these pulses, but this method is a very uncomfortable and expensive in case of installation, and it might decrease user's purchase desire. In this paper, we design and fabricate a small and inexpensive MODEM cable(M0C) so that it may be available to transmit TDC pulse generated from sensor in propeller shaft through existing power line. We also verify the facts that this MOC can be applied to SEPA and the effectiveness of the system through the experiments.

• 한국철도학회논문집
• /
• 제17권1호
• /
• pp.19-27
• /
• 2014

도시철도는 도심내를 운행하는 철도차량으로써, 도시철도 이용이 활발해지고 운행 계획에 따라 급곡선 구간의 운용이 필요할 것으로 예상된다. 하지만 이러한 급곡선 선로에서는 철도차량의 주행 안정성이 현저히 감소하며 크리피지가 증가하게 된다. 크리피지는 차륜이 레일 위를 구를 때 접촉면에서의 속도차에 의한 미끄러짐 량으로 차륜 마모, 진동 등의 원인이 된다. 따라서 크리피지를 줄이는 것은 주행 안정성 확보 및 환경 문제, 비용 저감에 도움을 줄 수 있다. 본 논문에서는 급곡선 선로 주행에 의한 주행방향 크리피지 발생 정도를 전동차를 모델링하여 분석하고 나아가서 급곡선 선로 주행 시 발생할 수 있는 문제점을 최소화하기 위한 대차 특성을 최적화한다.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2121-2133
• /
• 1997

A finite element code is developed for 3-D self-contact problems, using continuum elements with a SRI(Selective Reduced Integration) scheme to prevent locking phenomenon by the incompressibility of rubber. Contact treatment is carried out in two ways : using the displacement constraints in case of rigid contact ; and imposing the same contact forces on two contact boundaries in case of self-contact. The finite element code developed is applied to the deformation analysis of C.V.joint boots which maintain lubrication conditions and protect the C.V.joint assembly from impact and dust. The boot accompanies large rotation depending on the rotation of the wheel axis and leading to the self-contact phenomena of the boot bellows. Since this contact phenomenon causes wear of the product and has great influence on the endurance life of the product, it is indispensable to carry out stress analysis of the rubber boots. In case of self-contact, various methods for determining contact forces have been suggested with an appropriate contact formulation. Especially, the types of penetration in self-contact are modularized to accelerate conputation with a contact algorithm.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• 지질공학
• /
• 제8권3호
• /
• pp.235-245
• /
• 1998

도로에서의 미끄러짐을 방지하고 차량이 적당한 거리에서 정지할 수 있기 위해서는 적절한 마찰저항이 필요하다. 골재의 마찰저항력은 차량소통의 결과로 시간경과에 따라 마모 및 연마되어 감소하게 된다. 이 연구목적은 현장마찰 저항력을 예측하고 자갈골재간의 마찰저항치의 변화를 야기하는 원인을 규명하기 위해서 인디아나 자갈골재 실내시험방법을 개발하는 것이다. 자갈골재 연구에 대한 접근방법은 첫 번째로 각 각의 구성 암석형태 및 구성비율을 분석하는 것이다. 본 연구에 사용된 자갈들은 주로 탄산염암 골재로 구성되어 있으며 연마에 의한 저항치의 변화가 심하였다. 자갈을 구성하는 화성암 및 변성암은 이에 비해 연마에 의한 저항치의 변화가 적었으며 전체 골재의 마찰저항력을 증진시키는 것으로 사료된다. 파쇄자갈시료의 초기마찰 저항치 (IEV)와 연마 후 수치 (PV)의 평가는 시료 내 암종의 백분율에 따라 실행되었으며 가중평균이 적용되었다.

• 패션비즈니스
• /
• 제8권2호
• /
• pp.126-140
• /
• 2004

The purpose of this study is to examine the fashion design applying to the hoop, which have become various since 1980. To do this, this study is investigated the origin and the changes of the hoop historically, then classified its types, and finally analyze the collections from 1980 to 2003. The hoop was appeared on the late 15th century. Then in the mid 16th century, bell-shaped farthingale was prevailed, followed by drum-shaped wheel farthingale and hausse-cul in England and France. In the 17th century, slim silhouette was popular, so that the hoop declined gradually. In the 18th century, panier and panier double were introduced which is to make side-expanded skirt silhouette. In the 19th century, crinoline and bustle were created. The hoops applied to modern collections are used various materials, techniques, and forms. It is a main item of historicism which appeared in the trend of post-modernism and the phenomenon of applying underwear to an outer garment like corset. The hoop is adapted into three ways: only with the frame of hoop, wearing a skirt with some parts of the frame exposed on purpose, and wearing a skirt on the frame, thus not showing the frame. Thus, it is thought that wearing a hoop as a frame is used an element of recreation of past fashion, at the same time it was affected by historicism which is a branch of post-modernism. Applying the hoop as an outer garment may be affected by eroticism which changed underwear into an outer wear in postmodernism and deconstructivism.