• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.463-467
• /
• 2003

The traveling system of wheel type excavator, that is applied to drive method by friction of transmission, has many problems about transmisson. It need to settle the problem which is occurred at wheel type excavator and to study continuously variable transmisson which is used with only travel motor. This paper base on mathmetical modeling for travel motor and travel motor of wheel type excavator is designed continuously variable transmisson system without transmisson by direct control method.

• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.1-6
• /
• 2013

Hydraulic transmission is the main component delivering power to the drive wheels of an excavator during forward and backward movement, and it has low speed, high torque and high speed, low torque gear change ratios as a forward/backward two-speed main function. It also has additional function of ensuring that the excavator is stably fixed on the ground with the built-in parking brake during excavation operations. In this study, optimal design specifications are determined by modeling and simulating about the multi-disc-type friction clutch, which is the main component improving the reliability of the hydraulic transmission for a 14-ton wheel excavator, and the friction properties of the transmission clutch are analyzed by performing sample tests.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.73-79
• /
• 1998

For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

• Tribology and Lubricants
• /
• 제23권6호
• /
• pp.312-317
• /
• 2007

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wet-type multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are advanced in durability and braking power, and can be designed compactly. Thus, we designed and made wet-type multiple disk brakes of axle for the 14ton class wheel excavator to be localization of these imported all. These disk brakes were made a comparative test with the existing disk brakes by the SAE No.2 dynamometer, and the friction characteristics as dynamic and static friction coefficient and wear depth of friction paper were measured.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.381-386
• /
• 2009

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wettype multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are dvanced in durability and braking power, and can be designed compactly. Thus, we adesigned and made wettype multiple disk brakes of axle for the wheel excavator to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 3 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient on temperature of oil and applied pressure.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.19-28
• /
• 1999

In this study, a real-time simulation system and a washout algorithm for an excavator have been developed for a driving simulator with six degrees of freedom. The excavator model consisting of a boom. bucket, upper frame, lower frame and four wheels, has total 11 degrees of freedom. The suggested washout algorithm consists of high and low pass filters with second order. The high pass filters cut off low frequency of the motion cues limited by platform motion. The cut off frequency for the tilt coordination are suggested for a realistic regeneration of excavator motion.

• 한국산림과학회지
• /
• 제102권2호
• /
• pp.229-238
• /
• 2013

효율적인 임목수확작업 기술의 보급과 임목수확작업시스템을 구축하기 위해 타워야더 및 스윙야더 등에 의한 전목집재작업시스템과 굴삭기 그래플 등에 의한 단목집재작업시스템의 작업비용을 비교 분석하였다. 전목집재 작업시스템에서 작업비용을 산정한 결과, 체인톱에 의한 벌목작업비용이 2,099원/$m^3$, 타워야더에 의한 전목집재작업비용이 28,286원/$m^3$, 스윙야더에 의한 전목집재작업비용이 18,265원/$m^3$, 굴삭기 그래플 및 체인톱에 의한 조재작업비용이 18,939원/$m^3$, 바퀴식 미니포워더에 의한 소운재 및 집적 작업비용이 20,484원/$m^3$, 굴삭기 그래플 및 소형 운재차에 의한 소운재 및 집적 작업비용이 12,701원/$m^3$으로 나타났다. 또한, 단목집재작업시스템에서 작업비용을 산정한 결과, 체인톱에 의한 벌목 및 조재 작업비용이 10,160원/$m^3$, 굴삭기 그래플에 의한 단목집재작업비용이 7,567원/$m^3$, 굴삭기 그래플에 의한 지엽수집작업비용이 6,982원/$m^3$, 굴삭기 그래플에 의한 작업로개설비용이 3,040원/$m^3$, 바퀴식 미니포워더에 의한 소운재 및 집적 작업비용이 20,484원/$m^3$, 굴삭기 그래플 및 소형 운재차에 의한 소운재 및 집적작업비용이 12,701원/$m^3$으로 나타났다.

• 디지털산업정보학회논문지
• /
• 제8권1호
• /
• pp.1-7
• /
• 2012

In this paper Vehicle driving simulator have been used in the development and modification of models. A real-time simulation system and washout algorithm for an excavator have been developed for a driving simulator with six degrees of freedom. An interesting question, "how the 6 DOF Driving Simulator can be controlled optimally for the various tasks?" is not easy to be answered. This paper presents the hardware and software developed for a driving simulator of construction vehicle. A simulator can reduce cost and time a variety of driving simulations in the laboratory. Using its 6 DOF Simulator can move in various modes, and perform dexterous tasks. Driving simulators have begun to proliferate in the automotive industry and the associated research community. This effort involves the real-time dynamic of wheel-type excavator the design and manufacturing of the Stewart platform an integrated control system of the platform and three-dimensional graphic modeling of the driving environments.

• 한국산림과학회지
• /
• 제101권3호
• /
• pp.344-355
• /
• 2012

임목수확작업시스템 구축과 효율적인 임목수확작업 기술을 보급하기 위해 타워야더 및 스윙야더 등에 의한 전목집재작업시스템과 굴삭기 그래플 등에 의한 단목집재작업시스템의 작업시간 및 공정을 분석하였다. 전체 조사작업시간을 기준으로 분석한 1 cycle당 작업시간은 전목집재작업시스템에서 체인톱에 의한 벌목 46.6초/cycle, 타워야더에 의한 집재 480.6초/cycle, 스윙야더에 의한 집재 287.4초/cycle, 체인톱에 의한 조재 155.14초/cycle로 나타났다. 또 한 단목집재작업시스템에서는 체인톱에 의한 벌목 및 조재 225.65초/cycle, 굴삭기 그래플에 의한 단목집재 4,972초/cycle, 지엽집재 3,143초/cycle로 나타났으며, 바퀴식 미니포워더에 의한 소운재 4,688초/cycle, 굴삭기 그래플 및 소형운재차에 의한 소운재 2,118초/cycle로 나타났다. 전목집재작업시스템의 작업공정에서 체인톱에 의한 평균 벌목공정이 $57.89m^3$/일, 타워야더에 의한 평균 집재공정이 $20.3m^3$/일, 스윙야더에 의한 평균 집재공정이 $31.55m^3$/일, 체인톱에 의한 평균 조재공정이 $20.3m^3$/일로 나타났다. 또한, 단목집재작업시스템의 작업공정에서 체인톱에 의한 평균 벌목 및 조재공정이 $11.96m^3$/일, 굴삭기 그래플에 의한 평균 단목집재공정이 $34.75m^3$/일, 굴삭기 그래플에 의한 평균지엽수집공정이 $37.66m^3$/일, 굴삭기 그래플에 의한 평균 작업로의 개설공정이 73.8 m/일로 나타났으며, 바퀴식 미니포워더와 굴삭기 그래플 및 소형 운재차에 의한 평균 소운재 작업공정이 각각 $15.73m^3$/일과 $65.03m^3$/일로 나타났다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.14-20
• /
• 2015

A high-speed reduction transfer case is usually employed by an excavator, wheel loader, or bulldozer. When powerful torque is required in the case of climbing steep roads or towing heavy equipment, the high-speed reduction mode of the gearbox is used. Generally, a transfer case using a spur gear type with a speed reduction system has a speed reduction ratio of 1 to 1 or 2 to 1. However, the structure of a transfer case achieved at a high speed of 1 to 1 and a low speed of 4.5 or under 5.5 to 1 with the speed reduction by use of a planetary gear type with a speed reduction system was proposed in this study. By employing a planetary gear type with a speed reduction system, the compact structure of the transfer case was achieved, and the impact or the partial defect of gear teeth was eliminated.