• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.633-640
• /
• 2023

In this study, numerical analysis was performed based on field investigation to derive an appropriate reinforcement method by analyzing the displacement behavior characteristics of concrete blocks generated in the direct fixation track on the bridges of the serviced light rail transit. The track of this study was a direct fixation track on a sharp curved track, and the problem of movement of the concrete blocks installed on the bridge deck in the longitudinal and lateral directions occurred. In this study, based on the finite element model using 3D solid elements, the behavior of the direct fixation track that could be occurred under operating load conditions was analyzed. In addition, the reinforcement effect of various reinforcement methods was analyzed. As a result of analyzing the lateral displacement before and after reinforcement, it was analyzed that the maximum lateral displacement after reinforcement under the extreme lateral wheel loads significantly decreased to about 3% (about 0.1mm) compared to before reinforcement. In addition, as a result of examining the generated stress of the filling mortar, bridge decks, and reinforcing bar, it was analyzed that all of them secured a sufficient safety factor of 2.6 or higher, and the optimal conditions for the reinforcement method were derived. Therefore, it is judged that the number of anchoring reinforcements and symmetrical anchor placement reviewed in this study will be effective in controlling the occurrence of lateral displacement of concrete blocks and securing the structural integrity of bridges and concrete blocks.

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.257-268
• /
• 1990

The regional characteristics in the occurrence of the rice stem borer, Chilo suppressalis (Walker), in Korea, were examined by analyzing the light trap data obtained from 39 locations during the years of 1965-1988, and some ecological significance of the overwintering larval populations collected from the four locations where some of the typical ecological-race have been known, the results obtained are as follows; The total number of the moths have decreased greatly throughout the nation since 1970. The decrease in the total number of moths related with those in the spring moth but not in the summer moths, and suggested that the changes in the rice production systems have effected significantly on the second generation of the insect. The variations between the regions had been gret in 1960's, decreasing phase in 1970's and increasing phase in loast decade. The overall average of 50% emergence dates have shifted earlier in both moths, and the changes were different considerably with the regions as wheel as in generations. When the overwintered larvae were incubated at $25^{\circ}C$ and RH of 90%, the average mortalities were 21.07% for Suweon, 43.06% for Iri, 63.51% for Jinju, 27.04% for Gwangju. When the overwintered larvae were incubated at $25^{\circ}C$ and RH of 90%, the average mortalities were different with the body weight; 45.44% for the larvae of less than 39 mg, 37.61% for 40-49 mg, 37.28% for 50-59 mg, 30.17% for greater than 60 mg. When the overwintered larvae wee incubated at $25^{\circ}C$, post-diapause larval development periods of body weight classes were 18.6$\pm$1.2 days for the larvae of less than 39 mg, 20.4$\pm$3.3 days for 40-49 mg, 21.4$\pm$3.2 days for 50-59 mg, 21.8$\pm$3.2 days for grater than 60 mg, and only the larvae of less than 39 mg, body weight class less than 39 mg was found statistically different in post-diapause larval development periods. From these results, the changes in the cultural practice of the rice have effected on the ecological pattern of the rice stem borer, and the effects seemed to be different with the generations, and with the regions where the different ecological races are distributing.

• Journal of Distribution Science
• /
• v.9 no.1
• /
• pp.29-38
• /
• 2011

Since a distribution market was opened in 1993 after the conclusion of the Uruguay Round (UR), various new businesses emerged in the Korean retail industry, such as convenience shops, supermarkets, specialty stores, non-store marketing methods, and cyber shopping malls, in addition to traditional markets and department stores. Competition among these retail businesses has intensified. According to the National Statistical Office (NSO), the growth rate of the total retail industry has shown a 32% increase in the past 5 years. While department stores, supermarkets, specialty stores, and other non-store retailing venues have shown signs of stagnation at a growth rate of 20-30%, which is similar to the growth rate of the entire retail industry, convenience shops and non-store marketing have shown 60-70% growth over the same period. By comparison, the growth rate of cyber shopping malls has nearly tripled. When applying development aspects of retail businesses through the competition to the retail life cycle, mom-and-pop stores and traditional markets have already entered the decline phase as specialty stores reach their maturity phase and demonstrate their limit of growth. Department stores are now in the latter part of the growth phase, which is still considered to have some growth potential. Big super markets are still in the early part of their growth stage although they were introduced 20 years ago. Meanwhile, retail businesses such as convenience stores, supermarkets, mail order houses, and warehouse stores are entering the middle growth phase and are expected to continue with their quantitative growth. At a time when most retail businesses in Korea are in a state of development or in the full growth stage, what kind of new innovative retailing will appear and develop? Moreover, what growth engine will drive it? This study analyzes the appearance of innovative retailing and its development process by establishing a discussable consumer's choice model through the interlocking mutual behavior of differentiated competitiveness and consumers' choice based on an awareness of this issue. The analysis of the results of this study can be summarized as follows. First, if a new vacuum zone emerges at the retail market level, innovative retailing such as low price/low service or high price/high service will emerge simultaneously. Second, if the number of new businesses in the vacuum zone increases, this will create competitiveness among the businesses, and each retailer will develop raising of level. Third, if a new business that raises the level develops, competition between the new and the existing retailer will occur, and an assimilation process between the existing retailing and the new retailing will be unfolded. Fourth, each retailing will promote distribution innovations in order to break the frontier of the existing distribution technology, and other retailing will follow the innovator. On the basis of an analysis of the abovementioned results, this study presents the following three suggestions. First, responding to the consumer's decision-making process on the attributes of retail shops that promote differentiation in strategies, this study established a consumer's choice model that can be discussed in relation to changes in market share. Second, this study provided an analysis of the emerging and developmental processes of innovative retail businesses using a more precise logical structure on the basis of the consumer's choice model described in this study. Third, the development process of retail businesses discussed in this study presented retailing solutions regarding management aspects on how to compose a strong retail mix that can help retail businesses gain competitive advantages in the market.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.69-78
• /
• 2009

Korea has achieved significant economic growth with building the Gyeongbu Expressway. As the number of new road construction projects has decreased, it becomes more important to maintain optimal status of the current road networks. One of the best ways to accomplish it is weight enforcement as active control measure of traffic load. This study is to develop High-speed Weigh-in-motion System in order to enhance efficiency of weight enforcement, and to analyze patterns of overloaded trucks on highways through the system. Furthermore, it is to review possibilities of developing overweight control system with application of the HS-WIM system. The HS-WIM system developed by this study consists of two sets of an axle load sensor, a loop sensor and a wandering sensor on each lane. A wandering sensor detects whether a travelling vehicle is off the lane or not with the function of checking the location of tire imprint. The sensor of the WIM system has better function of classifying types of vehicles than other existing systems by detecting wheel distance and tire type such as single or dual tire. As a result, its measurement errors regarding 12 types of vehicle classification are very low, which is an advantage of the sensor. The verification tests of the system under all conditions showed that the mean measurement errors of axle weight and gross axle weight were within 15 percent and 7 percent respectively. According to the WIM rate standard of the COST-323, the WIM system of this study is ranked at B(10). It means the system is appropriate for the purpose of design, maintenance and valuation of road infrastructure. The WIM system in testing a 5-axle cargo truck, the most frequently overloaded vehicle among 12 types of vehicles, is ranked at A(5) which means the system is available to control overloaded vehicles. In this case, the measurement errors of axle load and gross axle load were within 8 percent and 5 percent respectively. Weight analysis of all types of vehicles on highways showed that the most frequently overloaded vehicles were type 5, 6, 7 and 12 among 12 vehicle types. As a result, it is necessary to use more effective overweight enforcement system for vehicles which are seriously overloaded due to their lift axles. Traffic volume data depending upon vehicle types is basic information for road design and construction, maintenance, analysis of traffic flow, road policies as well as research.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.104
• /
• pp.70-100
• /
• 2023

The celadon made in the Goryeo era, a time when Buddhism was flourishing in Korea, naturally contains many elements of Buddhist culture. Among them, inlaid celadon with Sanskrit inscriptions bears a close relationship with esoteric Buddhism. However, the research on deciphering the Sanskrit inscriptions has made little progress due to the small number of extant examples. However, the four recent excavations at the No. 23 kiln site in Sadang-ri, Gangjin have yielded new materials that allow the existing materials to be categorized into several types. The results obtained through the reading and interpretation of the inscriptions are as follows: First, the Sanskrit characters inlaid on the celadon were parts of mantras. Inscriptions where only one character is apparent cannot be deciphered, but scholars have revealed that others are written in the manner of a wheel mantra represent the "Mantra for Purifying the Dharma-Realm," "Six-Syllable Mantra of the Vidyaraja," "Sweet Dew Mantra," "Jewel Pavilion Mantra," "Mantra of the Savior Bodhisattva," "Dharani of the Mind of the Budha of Infinite Life," and "Mantra for Extinguishing Evil Rebirth." Each mantra was written in Siddham script. Second, they are believed to have been produced during the thirteenth and fourteenth centuries based on the arrangement of the inscriptions and the way the "Sweet Dew Mantra" is included in the "40 Hands Mantra." In particular, the celadon pieces with a mantra inlaid in a concentric manner are dated to the late thirteenth and early fourteenth centuries based on their production characteristics. Third, the interpretation of the inlaid mantras suggests that they all refer to the "Shattering Hell" and "Rebirth in the Pure Land." Based on this, it can be concluded that some of these inlaid celadon wares with mantras may have been used in Buddhist rituals for the dead, such as the ritual for feeding hungry ghosts (施餓鬼會). Also, because the Sadang-ri No. 23 kiln site and the "ga" area of the site are believed to have produced royal celadon, it is likely that these rituals were performed at the royal court or a temple under its influence. Fourth, this inlaid Goryeo celadon with Sanskrit mantras was not a direct influence of the ceramics of Yuan China. It emerged by adopting Yuan Chinese Buddhist culture, which was influenced by Tibetan Buddhism, into Goryeo Korea's existing esoteric practices. Fifth, the celadon wares inlaid with a Sanskrit mantra reveal a facet of the personal esoteric rituals that prevailed in late Goryeo society. Changes in esotericism triggered by the desire for relief from anxieties can be exemplified in epitaph tablets and coffins that express a shared desire for escaping hell and being born again in paradise. Sixth, the inlaid celadon with Sanskrit mantras shares some common features with other crafts. The similarities include the use of Siddham Sanskrit, the focus on Six-Syllable Mantra of the Vidyaraja, the correspondence with the contents of the mantras found on Buddhist bells, wooden coffins, and memorial tablets, and their arraignment in a similar manner with rooftiles. The major difference between them is that the Mantra for Extinguishing Evil Rebirth and the Sweet Dew Manta have not yet been found on other craftworks. I believe that the inscriptions of Sanskrit mantras are found mainly on inlaid celadon vessels due to their relatively low production cost and efficiency.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.