• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.123-131
• /
• 1992

This study was done to evaluate the changes of enamel surface by interproximal stripping and recovery of it by polishing. The number of 34 1st premolars which had extracted for orthodontic treatment were selected as samples. Interproximal stripping was performed by hand with metal strip and strip placer (Dentaurum Co., Germany) and low speed handpiece with diamond disk (Superdiaflex, Germany). Polishing was performed by hand with plastic strip (3M Col) and low speed handpiece with whip-mix, DCPA (Dicalcium Phosphate, Anhydrous, $CaHPO_4$) powder and Sof-lex (3M Co. U.S.A.) polishing kit. Each groups were examined under the scanning electron microscope (JEOL Co., JSM-840A, Japan) and the following results were obtained: 1. The stripped group performed by metal strip and diamond disk altogether showed deep furrow on the enamel surface as wide as about $10{{\mu}m}$. 2. There could be seen more irregular scratched line in the group stripped by metal strip than that by diamond disk. 3. The polished group performed by plastic strip and DCPA powder showed slight smoothening of the edge of stripped furrow on the enamel surface without relation to the stripping method. 4. The polished group performed by Sof-lex progressive polishing kit could not avoid the formation of the furrows on the enamel surface according to the particle size without relation to the stripping method. 5. The polished group performed by the superfine polishing wheel, the final stage of Sof-lex polishing method showed shallow scratched line as wide as within about $2{{\mu}m}$ on the enamel surface without relation to the stripping method. 6. The interproximal stripped enamel surface could not recover its original surface texture by any kind of polishing methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.107-118
• /
• 2002

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design of quasi-axisymmetric cold forging product by cold former working. The approach to the system is based on knowledge-based rules and a process knowledge base consisting of design rules is built. Knowledge for the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for the AutoCAD using a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of three main modules and five sub-modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available cold farmer, and the availability of standard parts. As the system using 2D geometry recognition is integrated with the technology of process planning, die design, and CAE analysis, the standardization of die parts for wheel bolt requiring cold forging process is possible. The developed system makes it possible to design and manufacture quasi-axisymmetric cold forging product more efficiently.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.275-280
• /
• 2022

Suspended solids play an important role in the growth and survival of aquatic organisms. The marine zooplankton species tested in this study were Tigriopus west (Copepoda) and Haustorioides koreanus (Amphipoda) sampled from the intertidal zone, including Artemia nauplii(Branchiopoda) hatched from cysts. The study design included six concentrations (0, 50, 100, 250, 500, and 1,000mg L^-1) of the suspended test particles assayed in triplicate. Experimental cultures in 500 mL-round polycarbonate bottles were subsampled after 96 h to count dead zooplankton. The culture bottles were agitated at 4 RPM on a rotating wheel at 23℃ and 30 PSU. The survival rates of Artemia nauplii and T. west were not affected by suspended solid concentrations higher than 50.0 mg L^-1, whereas the survival rate of H. koreanus decreased with increasing concentrations (p<0.05). In conclusion, H. koreanus and T. west, which were continuously exposed to suspended solid concentrations higher than 50.0 mg L^-1, were affected by low-intensity ecological stress. However, in the case of H. koreanus, a concentration of 50.0 mg L^-1 may be considered to be the limit of tolerance to suspended solids, suggesting that the number of individuals who eventually die will increase if continuously exposed.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.65-76
• /
• 1982

This survey was conducted to investigate the status of repair and maintenance of 4 wheel tractor for a basic reference to the improvement of quality and proper utilization of tractors. Thirty two counties from eight provinces, except Jeju, were covered in this study in order to investigate annual break-down and repair of tractor in 1980. The analyzed results are summarized as follows; 1. The average number of break-down of large size tractors(47ps) was 5.0 times in a year and it was about twice of that of small size tractors(19-23ps). The break-down frequency per 100 hours of use was 1.11 times in the large size and 0.65 times in the small size tractors. 2. 75.6 percent of total break-down was occured in main body of tractor and 24.4 percent in attachments. In particular, the break-down of plow and rotavator was more than 80 percent of total break-down of the small size tractor attachments. 3. The large size tractors which were occured more than one times of break-down a year was 75 percent and its rate of the small size tractor was 62 percent. But 9 percent of tractor surveyed had more than ten times of break-down in a year 4. The frequency of break-down had a peak in May, and it was directly proportional to the hours of use. 5. The causes of break-down were poor maintenance and operation by 29.8 precent, old parts by 30.2 percent, poor quality of parts by 20.6 percent, poor field condition by 16.3 percent and others by 3.1 percent. 6. Annual number of repair was 5.5 times and among them 55.6 percent was done by shop and 44.4 percent by operator. 7. Total required repair time was 30.6 hours a year in the large size tractor and 19.9 hours in the small size tractor. Average repair time was 3.62 hours a time. 8. Annual repair cost was 278 thousand won in the large size tractor and 70 thousand won in the small size tractor. The repair cost per hour of use was 621 won in the large size and 198 won in the small size tractor. 9. The repair cost rate of tractor(Y) was regulated with tractor age (X) as follow; Y=0.752X In case of the service life of tractor was 10 years, the total repair cost rate was 64 percent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.359-365
• /
• 2011

This study was conducted to investigate the production, elver stocking, rearing facilities and rearing method of eel culture to determine aquaculture management conditions for optimal rearing of eel Anguilla japonica. The production of eel culture was evaluated by the proportion of eels from the main inland fin fish species production in Korea. Elver stocking was assessed by the elver stocking densities of pond and recirculation culture. Rearing facilities were investigated according to the rearing tank size proportion of the pond and recirculation culture. We selected sample farms by region and by size. We visited sample farms and recorded the number of elvers stock for pond area, size of tanks, feed and feed quantity, and the size and number of harvest eels. The production capacity of Jeollanam-do and Jeollabuk-do were 71.9% and 21.3% respectively. This production quantity represented 93.2% of the total Korean eel production quantity. In Jeollanam-do, there are 236 eel farms, 202 pond farms, and 34 recirculation aquaculture facilities. The elvers' first density data by each aquaculture method revealed that elvers' first density varied more in recirculation system farms, as compared to pond aquaculture. In intensive pond farms, the elvers' first density decreased as the size of farm increased. There was a correlation between the size of tank(x) and the facility of a water wheel for dissolved oxygen in pond culture systems(y=0.022x-0.494; $R^2$=0.860). Another strong correlation was found between the weight of eel(x) and eel density(y) in pond culture systems(y=283.5x-0.27; $R^2$=0.992). Finally, there was a strong correlation between the length of eel(x) and the weight of eel(y) in intensive pond culture(y=0.0005x-3.2783; $R^2$=0.9775). The final survival rate did not differ significantly among pond sizes and culture types.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.695-702
• /
• 2006

The stress distribution and the critical stresses in concrete pavements were analyzed using formulations in the transformed field domains when dual-wheel single-, tandem-, and tridem-axle loads were applied. First the accuracy of the transformed field domain analysis results was verified by comparing with the finite element analysis results. Then, the stress distribution along the longitudinal and transverse directions was investigated, and the effects of slab thickness, concrete elastic modulus, and foundation stiffness on the stress distribution were studied. The effect of the tire contact pressure related to the tire print area was also studied, and the location of the critical stress occurrence in concrete pavements was finally investigated. From this study, it was found that the critical concrete stress due to multi-axle loads became larger as the concrete elastic modulus increased, the slab thickness increased, and the foundation stiffness decreased. The number of axles did not tend to affect the critical stress ratio except for a small foundation stiffness value with which the critical stress ratio became significantly larger as the number of axles increased. The critical stress location in the transverse direction tended to move into the interior as the tire contact pressure increased, the concrete elastic modulus increased, the slab thickness increased, and the foundation stiffness decreased. The critical stress location in the longitudinal direction was under the axle for single- and tandem-axle loads, but for tridem-axle loads, it tended to move under the middle axle from the outer axles as the concrete elastic modulus and/or slab thickness increased and the foundation stiffness decreased.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.233-233
• /
• 2017

Algal communities are important to maintain the aquatic ecosystems function. Algae have short life cycles, they respond quickly to environmental change and their diversity and density can indicate and the quality of their habitat. The bloom forms before the rice seedings have emerged, it may present a physical barrier that prevents the seedlings from penetrating the floodwater. Wind may also move the algal bloom, pushing the young plants beneath the surface. Another harmful action develops when the water dries up and the algae form a layer at the bottom of the field. The layer envelops the seedlings, which are not yet deeply rooted, and drag them to the surface when the water is let in again. Soil utilization pattern can be the mail facter affecting soil physico-chemical properties, especially in soil phosphorus (P). Solid content of the algae culture solution increased with the increase in the nitrogen rather the phosphors concentration. Phosphoric acid was treated with conventional treatments (100-0%, before transplanting time-tillering stage), 50-50%, 0-100%, and un-treated. The herbicide was treated on the 7 DAT (day after transplanting). Green algae samples were collected 20 DAT. Total phosphoric acid was the highest at 0.06 in 50-50% treatment in 20 DAT. The amount of green algae was about twice (9.8 mg/20ml) that of un-treated. Total number of green algae was 54 species(Green algae 35 species, Euglena 9 species, Stone wheel 10 species). Among the phosphoric acid treatment methods, the number of occurrences of green algae were the highest with 39 species in 0-100%, followed by 50-50%, 28 species, conventional treatments, 22 species, non-treatment, 18 species, respectively. Rice Yield was not significantly different by phosphoric treatment time, but slightly higher than un-treated. The maximal algal biomass was observed about 2weeks or 1 month after transplanting; the subsequent decrease of the biomass was related to the consumption by grazers and to a deficient light under the rice canopy. Maximal algal growth was observed just before tillering. To estimate the suitable method of phosphorus application in puddled-soil drill seeding of rice, available phosphorus appearance of algal water bloom, and rice yield were investigated in paddy soil of rice-barley double cropping system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2016

Computational fluid numerical analysis using the commercial code CFX was performed to develop a Pelton turbine for a pico hydro power generator using the circulating water of a cooling tower in a large building. The performance of the Pelton turbine was examined for different design factors, such as the bucket shape, in which the Pelton wheel was connected in an appropriate manner to the pipe section, and the number of buckets in order to find the optimal design of Pelton turbine for a pico hydro power using surplus water. A benchmark test was carried out on the manufactured small scale Pelton turbine to validate the design method of the Pelton turbine by numerical analysis. The results obtained by comparing the flow characteristics and power output measured using the ultrasonic flowmeter, the pressure transducer and the oscilloscope with the numerical results confirmed the validity of the analytical design method. The possibility of developing Pelton turbines for kW class pico hydro power generators using surplus water with an average circulation velocity of 1.2 m/s for the chosen bucket shape and number of buckets in a 30 m high building was confirmed.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.5-38
• /
• 2003

The history of Baekje Kingdom, one of the Three kingdoms, is divided into three periods to the change of sociopolitical center, including its capital as follows: Hanseong Period (18 BC ~ AD 475), Ungjin Period (AD 475~538), and Sabi Period (AD 538~660). Though the Hanseong Period of Baekje Kingdom covers more than two thirds of the whole history of Baekje Kingdom (493 years), history and archaeological culture of the Hanseong Period is still unclear and even ambiguous comparing to the Ungjin and Sabi periods. Most of all, it is because of quite limited historical records and archaeological data available. In addition, negative attitude of the Korean academic circles to the early records of Samguksaki(三國史記) has been a critical obstacle to the study of early history of the Three kingdoms, including the Hanseong Period of Baekje kingdom. Author, who has attempted to combine historical records and archaeological data in order to reconstruct the history and archaeological culture of the early Baekje, specifically the Hanseong Period, has held positive attitude to the early records of the Samguksaki as far as possible. He(Author) came to realize that comprehensive understanding of Mahan (馬韓) society, one of the Three Han (三韓) Society was more than essential in the study of Baekje. According to historical records and archaeological data, Mahan Society represented by Mojiguk(目支國) ruled by King Jin(辰王) has been located in the middle and/or southwestern parts of the Korean peninsula from the 3rd~2nd century BC through the end of the 5th century or early 6th century AD. Mahan already occupied central portion of the Korean Peninsula, including the Han River Valley when King Onjo(溫祖王) first set up the capital of Baekje Kingdom at Wiryeseong (慰 禮城) considered to be modern Jungrang~Songpa-gu area of Han River Valley. From the beginning of the Baekje history, there had been quite close interrelationships between Baekje and Mahan, and the interrelationships had lasted for around 500 years. In other words, it is impossible to attempt to understand and study Hanseong period of Baekje, without considering the historical and archaeological identity of Mahan. According to the Samguksaki, Baekje moved its capital three times during the Hanseong Period (18 BC ~ AD 475) within the Han River Valley as follows: Wiryeseong at Jungrang-gu area of the Han River (河北慰禮城, 18 ~ 5 BC), Wiryeseong at Songpa-gu area of the Han River(河南慰禮城, 5 BC ~ AD 371), Hansan at Iseongsan fortress site(Historical site No. 422, 漢山, AD 371~391), and Hanseong at Chungung-dong of Hanam city(漢城, AD 391~475). Before 1990s, archaeological data of the Hanseong Period was quite limited, and archaeological culture of Mahan was not well defined. Only a few burial and fortress sites were reported to be archaeological remains of the early Baekje, and a few settlement and jar burial sites were assumed to be those of Mahan without clear definition of the Mahan Culture. Since 1990s, fortunately, a number of new archaeological sites of Hanseong Baekje and Mahan have been reported and investigated. Thanks to the new discoveries, there has been significant progress in the study of early Baekje and Mahan. In particular, a number of excavations of Pungnap-dong Fortress site(Historical site NO. 11, 1996~2003), considered to be the Wiryeseong at south of the Han River, the second capital of the Hanseong Baekje, provided critical archaeological evidence in the study of Hanseong Period of Baekje. Since the end of the 1990s, a number of sites have been reported in Gyeonggi, Chungcheong, and Jeolla provinces, as well. From these sites, archaeological features and artifacts representing distinctive cultural tradition of Mahan have been identified such as unstamped fortresses, pit houses cut into the rock, houses with lifted floor(掘立柱 건물), and potteries decorated with toothed wheel and bird's footprint designs. These cultural traditions reflected in the archaeological remains played a critical role to define and understand archaeological identity of the Mahan society. Moreover, archaeological data from these new sites reported in the middle and southwestern parts of the Korean Peninsular made it possible to postulate a hypothesis that the history of Mahan could be divided into three periods to the change of its sociopolitical center in relation with the Baekje Kingdom's political Situation as follows: Cheonan (天安) Period, Iksan(益山) Period, and Naju(羅州) Period. The change of Mahan's sociopolitical center is closely related to the sociopolitical expansion of the Hanseong Baekje.