• 제목/요약/키워드: Wheel Head

검색결과 60건 처리시간 0.026초

영종대교 강직결 궤도구조의 동적거동에 관한 연구 (Dynamic Behavior of Direct Fixation Track on Yeongjong Grand Bridge)

  • 최정열;이규용;정지승;안대희;김수형
    • 문화기술의 융합
    • /
    • 제6권3호
    • /
    • pp.443-448
    • /
    • 2020
  • 본 연구에서는 영종대교를 구성하고 있는 교량형식(트러스교, 현수교)별 열차종류(AREX, AREX Express, KTX, KTX-Sancheon) 및 열차속도가 강직결 궤도구조의 동적거동에 미치는 영향을 분석하고자 현장측정을 수행하였다. 현장측정결과를 바탕으로 궤도충격계수 및 열차주행안정성(탈선계수, 윤중감소율, 레일두부횡변위)을 국내, 외 관련기준 및 법규와의 비교하여 영종대교 교량상 강직결 궤도구조의 동적거동에 영향을 미치는 열차하중 및 속도의 효과를 분석하였다. 연구결과, 영종대교 교량형식별 궤도의 동적거동의 차이는 뚜렷하지 않으나 열차하중의 크기에 보다 직접적인 영향을 받는 것으로 분석되었다. 따라서 향후 열차속도 증가에 따른 궤도충격계수의 증가와 이에 따른 궤도부담력의 증가수준을 감안한 영종대교 강직결 궤도구조의 보강방안 수립이 필요할 것으로 판단된다.

대형트럭 승객거동과 상해치 해석을 위한 유한요소모델의 개발 (Development of a finite Element Model for Studying the Occupant Behavior and Injury Coefficients of a Large-sized Truck)

  • 오재윤;김학덕;송주현
    • 대한기계학회논문집A
    • /
    • 제26권8호
    • /
    • pp.1577-1584
    • /
    • 2002
  • This paper develops a finite element model for studying the occupant behavior and injury cofficients of a large-sized cab-over type truck. Since it does not have a room to absorb collision energy and deformation in front of the passenger compartment the deformation is directly transmitted to the passenger compartment. Moreover, since its steering column is attached on the frame, severe deformation of the frame directly affects on the steering wheel's movement. Therefore, if the occupant behavior and injury coefficients analysis is performed using a finite element model developed based on a sled test, it is very difficult to expect acquiring satisfactory results. Thus, the finite element model developing in this paper is based on the frontal crash test in order to overcome the inherent problems of the sled test based model commonly used in the passenger car. The occupant behavior and injury coefficients analysis is performed using PAM-CRASH installed in super-computer SP2. In order to validate the reliability of the developed finite element model, a frontal crash test is carried out according to a test method used fur developing truck occupant's secondary safety system in european community and japan. That is, test vehicle's collision direction is vertical to the rigid barrier and collision velocity is 45kph. Thus, measured vehicle pulses at the lower parts of the left and right B-pilla., dummy chest and head deceleration profiles, HIC(head injury criterial) and CA(chest acceleration) values, and dummy behavior from the frontal crash test are compared to the analysis results to validate reliability of the developed model.

허상 디스플레이에 적용되는 레이저 다이오드의 출력 효율과 파장 변이에 대한 연구 (An Optical Quenching and Efficiency of Laser for the Virtual Display System)

  • 지용석
    • 전자공학회논문지
    • /
    • 제53권9호
    • /
    • pp.129-134
    • /
    • 2016
  • 본 논문은 허상 디스플레이의 광원으로 적용되는 고휘도 레이저의 접합온도에 따른 파장 변이(an optical quenching) 제어와 광 출력 효율 증대를 위한 제어 방법에 대해 연구하였다. 차량용 헤드업 디스플레이(Head-up Display)와 같은 허상 디스플레이(Virtual Display)는 외부 조도 환경의 영향을 받는 디스플레이 특성으로 인하여 디스플레이 휘도와 광효율 측면의 기술요소에 대한 해결 방법이 요구된다. 태양광의 영향으로 인하여 헤드업 디스플레이는 고휘도 광원에 대한 필요가 증대되고 있으며, 이러한 문제점을 해결하기 위하여 고휘도 청색 레이저 광원이 검토되고 있다. 그러나 낮은 레이저 접합 온도 특성의 단점을 갖고 있어 수명 감소와 광효율 감소라는 문제점을 지니고 있으며 특히 청색 파장 변이를 일으키는 원인이 된다. 이러한 문제점을 해결하기 위하여 고주파 펄스폭 변조 방식의 전류인가 방법과 황색 형광 물질을 사용한 칼라 휠 방식의 DMD(digital micro mirror device) 초소형 패널을 적용하였다. 적응형 펄스폭 변조 방식의 주파수와 듀티비 분석과 최적화를 통하여 청색 레이저의 파장 변이를 방지하고 37%의 광효율을 증대 효과를 얻었다.

고려시대 인물관련 제작물을 통해서 본 복식에 관한 연구 (2) -고려시대 인물관련 제작 불화(佛畵) 중 '사경화'를 통해서 본 복식에 관한 연구(2) -평서민 남녀복식을 주로하여 (A Study on the Costume of The Koryo Dynasty(2) -See through by human being, on the written Budist scripture(2)-2)

  • 임명미
    • 복식
    • /
    • 제23권
    • /
    • pp.211-223
    • /
    • 1994
  • It was aimed to study the costume of Koryo dynasty based upon the one hundred and ten pictures of the writtened Budist scripture. The costume to study were made about 400 years during the King Mok-jong(1006) to the first year of the king Kong-yang based upon the Avatamaka Sutra and the Sutra of the Lotus. 가) Men's wear : 1. Hair style and hair dress : 1) Man bored a hair and put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots, and tied up with a hair ribbon. A kinds of hats were Tung-t'ien-kuan(Yuan-yu-kuan) and Chin-hien-kuan and as a court dress. The man wore pok-여 as an official uniform and wore a pok-du , kun-mo as an everyday dress and wore a helmet as a solidier's uniform. 2. Clothes : 1) They wore Yuan-yu-kuan and Chin-hien -kuan as a court dress, and wore belt, boots, pleated decorated ling skirt also. They wore round shape collor big sleeve jacket, small sleeve long coat, belt , boots as an official dress. 2) the soldiers wore helmet, scarf, yangdang-kap , hung-kap, bak-kap, we-yo-kap, kun-kap and jok-kap and carries arms. 3) The young boys bind his hair up one, two and three angle shape an tied up a hair ribbons. 나) Women's wear : 1. Hair Style and hair dress : high rank ladies made their hair top knot (one, two, or more knots) and tied with hair ribbons , and decorated with precious stone, pan shape head dress , wheel shape head dress. 2. Clothes ; 1) high rank ladie's wore kun -kyun attached jacket , and jacket sleeves decorated pleats and pleats decorated on skirt, apron, back apron, knot belt, scarf.

  • PDF

Sensing Technologies for Grain Crop Yield Monitoring Systems: A Review

  • Chung, Sun-Ok;Choi, Moon-Chan;Lee, Kyu-Ho;Kim, Yong-Joo;Hong, Soon-Jung;Li, Minzan
    • Journal of Biosystems Engineering
    • /
    • 제41권4호
    • /
    • pp.408-417
    • /
    • 2016
  • Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

Interactive Wind System을 이용한 VR 사이버 멀미 개선 연구 (A Study on the Reduction in VR Cybersickness using an Interactive Wind System)

  • 임도전;이예원;조예솔;류태동;한다성
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제27권3호
    • /
    • pp.43-53
    • /
    • 2021
  • 본 논문은 자동차 핸들과 가속 페달로부터의 온라인 사용자 입력에 따라 Virtual Reality (VR) 환경에서 인공적인 바람을 생성하는 상호작용형 윈드 시스템을 제안한다. 제안된 시스템은 사용자가 레이싱 자동차 VR 응용 콘텐츠에서 세 방향으로부터 불어오는 바람으로부터 촉감을 느끼도록 하기 위해 머리장착형 디스플레이(Head-Mounted Display: HMD)와 세개의 선풍기로 구성된다. VR 멀미를 개선하는 것에 대한 바람의 효과성을 평가하기 위해, 본 논문은 멀미에 대한 가장 기본적인 척도 중의 하나인 SSQ (simulator sickness questionnaire)를 도입한다. 13명의 피험자들을 대상으로 바람이 있는 경우와 그 다음 그렇지 않은 경우 또는 그 역으로 레이싱 자동차 콘텐츠에 대한 실험을 수행하였다. 실험 결과는 인공적인 바람을 사용하는 경우 긍정적인 사용자 경험을 제공하면서 명확하게 멀미를 개선하는 것을 보여주었다.

지능형 뱀 로봇에 관한 연구 (Research about Intelligent Snake Robot)

  • 김성주;김종수;전홍태
    • 한국지능시스템학회논문지
    • /
    • 제13권1호
    • /
    • pp.70-75
    • /
    • 2003
  • 기존 이동로봇의 활발한 연구와 더불어 다양한 형태의 이동로봇이 등장하였다. 이에 본 논문에서는 8축으로 구성된, 총 16 Degree Of Freedom을 가지는 다 관절 뱀 로봇을 제작하였다. 뱀 로봇은 지면과의 진행 마찰력을 고려하여 무동력 바퀴를 사용하였다. 또한 PC Cam과 초음파 센서를 사용하여 각 관절이 움직일 수 있는 Joint Angle을 나타내기 위하여 Target의 색상과 거리를 입력으로 하였다. 뱀 로봇은 머리부분, 몸통 그리고 꼬리부분으로 나뉘어 진행하는 방식을 가지며 PC Cam 을 통해 화면에 보여지는 움직이는 특정 목표물에 대하여 진행을 하며, 진행 중 움직이거나 고정되어있는 Obstacle이 포착될 경우 충돌회피를 통하여 Target을 추종하는 방식을 실험적으로 보이고자 한다.

보물 도기 말머리장식 뿔잔의 제작 기법 연구와 보존처리 (Study on Manufacturing Techniques and Conservation for Earthenware Horn Cups with a Horse Head Decoration(Treasure))

  • 권오영;함철희;유지아;김한슬;박창열
    • 헤리티지:역사와 과학
    • /
    • 제55권1호
    • /
    • pp.51-61
    • /
    • 2022
  • 도기 말머리장식 뿔잔은 부산광역시 동래구 복천동 제7호 무덤에서 출토되었다. 뿔을 본떠 흙으로 만든 것으로 액체를 담아 사용된 것으로 생각되며 신라·가야 지역의 무덤에서 여러 형태의 뿔잔이 다수 출토되었다. 뿔잔 2점이 한 쌍으로 출토되었으며 크기는 서로 다르지만 전체적인 형태와 제작 기법은 거의 동일하다. 이번 처리를 마친 유물은 발굴된 두 개의 뿔잔 중에 큰 형태에 해당하며 구연부를 중심으로 말머리장식 쪽으로 균열이 두 군데에 있었으며 소실된 편도 관찰되었다. 뿔잔은 말의 가슴을 바닥에 닿게 하고 이를 중심으로 한쪽은 말머리를 장식하고 반대쪽은 원추형의 뿔잔 입구가 있고 뒤쪽에 2개의 다리를 붙여 뿔잔의 균형을 맞춘 U자형의 형태이다. 뿔잔의 표면은 물레로 성형하고 말머리와 연결된 부분은 깎아 다듬은 자국이 있다. 말머리의 형상은 간결하게 귀·눈·코와 입 등 특징을 잘 파악하여 사실적으로 표현했으며 색은 회색이다. 이 연구에서는 비파괴 상태조사를 통하여 내부 구조를 알아보는 등 제작 특성을 알아보고자 하였다. C·T영상을 통하여 제작 기법을 알아보고 상태를 진단하여 과학적 보존처리를 통해 유물을 안정화 하였다. 보존상태 정밀진단 결과, 구연 두 곳에 결손부분이 있고 균열이 연장된 것을 확인하였다. 이 중 한 곳은 균열에 이격이 더해진 상태로 접합이 된 상태였다. 과거 접합이 이루어진 재료를 수습하여 적외선 분광분석을 실시한 결과, 질산셀룰로오스계 수지가 사용된 것을 알 수 있었다. 따라서 이번 보존처리는 과거의 재료를 제거하고 균열의 확산을 방지하는 데 중점을 두고 진행하였다. 보존처리 전 상태조사 및 과학적 조사를 실시하여 도기 말머리장식 뿔잔(보물)에 대한 자료를 확보하고, 이를 바탕으로 효과적인 보존처리 방안 모색, 기존 접착제의 안전한 제거 및 복원 재료의 가역성을 고려하여 선택하고 보존처리는 전문가 자문회의를 통해 최상의 방법으로 실시하였다.

고려시대 인물관련 제작물을 통해서 본 복식제도에 관한 연구(2)-고려시대 인물관련 제작 불화(佛畵)중 '경판화'를 통해서 본 복식제도에 관한 연구(2)-$\cicled3$- (A Study On the costume of the Koryo Dynasty (2)-$\cicled3$-See Through by the Human being, on the Buddist Painting of Koryo Dynasty Engraved Painting on the wood.-)

  • 임명미
    • 복식
    • /
    • 제26권
    • /
    • pp.221-232
    • /
    • 1995
  • It was aimed to study the costume of Koryo dynasty based upon the one hundred and thirty four pictures of the engraved painting on the wood. The costume to study were made about 400 years during the King Mok-jong(1006) to the forth year of the king Wu based upon the Avatamaka Sutra and Pulsul-Yaesu 가) Men's wear 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots. 2. Clothes : 1) King wore an uniform of Mien-lu Kuan system. 2) The Crown Prince and high rank officials wore Yuan-yu-Kuan Won-jung-po-ju-Kuan, Sa-bang-Kuan, Yun-wha-Kuan and montain shape Po-ju-Kuan as a court dress. 3) Officials put on the Pok-du as an official dress and Won-jung-ip-mo, Kun and Mo as an everyday dress, the monk put on the diamond shape Do-kuan and Du-kun and the soldier put on the Helmet. Costume system of man was as follows ; They wore exchanged shape collar, big sleeve jacket, long skirt, apron, hanging precious stone big belt as a Mien-pok. 4) The soldiers wore helmet, Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same with Dang Dynasty, five dynasty of china, Song, Kum, Won, Myung Dynasty, and our costume of Poe-hae, and Shilla Dyansty. 2) Official ladies wore exchange shape collor, big sleeve jacket, long pleats skirt, apron, and back apron, scarf. 3) Women wore top knot hair style and decorated by ribbons. Shoulder scarf attached small sleeve jacket and wore reaching up to the knee length. Side seam is open and under wear was long skirt. 4) High knot hair style and exchanged shape collor jacket, under wear wore long skirt. They wore under skirts and the jackets. 5) High knot hair style, exchange shape collor jacket reaching up to the knee length small sleeve under wear wore long skirt, belt. 6) High knot hair style, big sleeve jacket and long skirt. 7) Foot wear wore boots, mokasin type shoes, sandal.

  • PDF

대형 트럭 자동차의 엔진냉각수 누출, 제동 및 배기시스템 과열에 관련된 화재사례 고찰 (A Study for Fire Examples Involved in Engine Coolant leakage, Brake and Exhaust System Over-Heating of Heavy-Duty Truck Vehicle)

  • 이일권;국창호;함성훈;이영숙;황한섭;유창배;문학훈;정동화;안호철;이정호
    • 한국가스학회지
    • /
    • 제23권4호
    • /
    • pp.40-45
    • /
    • 2019
  • 논문은 대형트럭의 화재에 관련된 고장사례를 고찰한 논문이다. 첫 번째 사례는 6번 실린더 라이너 상단부와 실린더 헤드 사이에 접촉하는 D링부의 변형으로 헤드 가스켓부의 기밀불량 현상으로 냉각수가 누출하여 엔진이 과열되었다. 이 열이 에어크리너 주변 배선에 전달되어 쇼트(short)에 의해 화재가 발생된 것을 확인하였다. 두 번째 사례는 자동차의 리어(Rear) 4축 브레이크 라이닝 과다마모로 브레이크 작동 S 캠(Cam)이 리턴되지 않아 브레이크 라이닝이 드럼과의 계속적인 마찰에 의한 마찰열에 의해 화재가 발생된 것을 확인하였다. 세 번째 사례는 엔진 점검을 위해 캡을 틸팅하였을 때 틸팅 모터의 과부하로 배선의 단락현상이 발생하여 이 불꽃에 의해 화재가 발생한 것을 확인하였다. 따라서, 대형트럭의 화재는 철저한 관리를 하여 화재발생을 최소화하여야 한다.