• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.237-245
• /
• 2001

A study was made on the chemical treatment of silica and silane coupling agents, bistriethox ysilylpropyltetrasulfide(Si 69) and ${\gamma}$-mercaptopropyltrimethoxy silane (MPS) for reinforcement of silica formulation. The effects of chemical treatment method and the most popular two coupling agents were examined. The results clearly indicate that the wet method, coupling agent is combined chemically with the silica prior to mixing, has more dispersion, wetting ability, dynamic properties and stability than the dry method, coupling agent is premixed directly with the silica. The mixing was done using a bench-type kneader having two mixing cam and a two-roll mill, under approximately similar conditions. The physical properties of SBR vulcanizates give rise to marked improvements by addition of Si 69 and MPS in comparison with without silane coupling agents. The optimum amount of Si 69 and MPS was 2 w/w% by experiments in the dry method but was 4 w/w% by EA and TGA analysis in the wet method.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.839-844
• /
• 2000

In developing of soil wetting agents using the mixture of polyoxyethylene octylphenyl ether [$C_8H_{17}O$ $(C_2H_4O)_{10}H$, POE] and polyoxyethylene+polypropyleneoxide tridecylether (1:1, w/w, CM-1), the effect of base carriers such as zeolite and vermiculite on changes of concentration of POE and on initial wetting of peat-vermiculite media were determined. The concentration of POE in the treatment of zeolite was higher than that of vermiculite. The treatments of POE+CM-1 with zeolite or vermiculite as carrier were effective in initial water retention of root media having about 510 mL of water per pot, where those of AquaGro and control had 490 mL and 400 mL of water per pot, respectively. In the evaporative water loss, the treatment of zeolite and AquaGro were faster than those of control and vermiculite. The treatment of AquaGro had faster water movement in root media than those of POE+CM-1 regardless of carriers and same trends were observed in the volume of water infiltrating into root media. Also, increasing the amount of POE+CM-1 resulted in increased water retention capacity, evaporative water loss, water movement in root media and amount of water infiltrating into root media.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.286-294
• /
• 2006

This study has examined the flexural properties of natural and chemically modified coir fiber reinforced cementitious composites (CFRCC). Coir fibers of two different average lengths were used, and the longer coir fibers were also treated with a 1% NaOH solution for comparison. The fibers were combined with cementitious materials and chemical agents (dispersant, defoamer or wetting agent) to form CFRCC. The flexural properties of the composites, including elastic stress, flexural strength, toughness and toughness index, were measured. The effects of fiber treatments, addition of chemical agents and accelerated ageing of composites on the composites' flexural properties were examined. The results showed that the CFRCC samples were 5-12 % lighter than the conventional mortar, and that the addition of coir fibers improved the flexural strength of the CFRCC materials. Toughness and toughness index, which were associated with the work of fracture, were increased more than ten times. For the alkalized long coir fiber composites, a higher immediate and long-term toughness index was achieved. SEM microstructure images revealed improved physicochemical bonding in the treated CFRCC.

• Clean Technology
• /
• v.16 no.3
• /
• pp.172-181
• /
• 2010

Hydrofluoroethers (HFEs) with fluoride molecules in their structure which are evaluated as the third generation replacement alternatives to chlorofluorocarbons (CFCs) are known to be excellent for removal of nanoparticles and fluoride-type soils due to their low surface tension and high wetting index. In addition, HFEs have good physical properties with no flash point and excellent drying characteristics. But, HFEs also have shortcomings in that they are not effective for removal of organic soils due to their poor solubility in soil. In this study, $C_5$ HFE-based cleaning agents were formulated through addition of solvents such as isopropyl alcohol (IPA), ethyleneglycol monoether (EG), propyleneglycol monoethylether (PM) to HFE-7100 [$CF_3CF_2CF_2CF_2OCH_3$] or HFE-mec-f [$CF_3CHF=CF_2OCH_2CF_3$] with its maximum amount, respectively, in order to have no flash point for the safety in the working environment. These solvents are known to be excellent for dissolving organics in soil. Their physical properties and cleaning abilities for fluxes, water-insoluble cutting oils, and fluoride-type oils were evaluated and compared with those of other cleaning agents with single components. The experimental results show that the HFE-based formulated cleaning agents have various good physical properties which are almost similar to those of a single type of HFE cleaner. They show excellent cleaning ability for fluxes, water-insoluble cutting oils, and fluoride-type oils. These results indicate that the HFE-based formulated cleaning agents can be applicable to various industrial cleaning fields because of their good physical properties and cleaning abilities for various soils.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.171-175
• /
• 2010

This study was carried out to find the effect on growing media and proper time for water supply in rice seedling stages. Plant height of rice seedling for SIPAN-BRL among current several growing medias was higher in Chuchungbyeo than Ilpumbyeo, and that of root length was higher in check among used growing medias. Fresh and dry weight of shoot and root of two rice cultivar. Water time to absorption on each treatment of growing media concentration took similarly in SIPAN-BNH and check were similar. But 500 minutes did in 100ppm and did 370 and 470minute in 300 and 500ppm, respectively. Wilting time of rice seedling was appeared highly at 300ppm of SIPAN-BRL in Chuchungbyeo and 100ppm of SIPAN-BRL in Ilpumbyeo, while it prolonged at 300ppm in Chuchungbyeo and 500ppm in Ilpumbyeo, respectively. Water content at wilting stage was appeared highly at SIPAN-BRL 500ppm in both Chuchungbyo and Ilpumbyeo, while SIPAN-BNL was high in 300ppm of Chuchung-byeo and Ilpumbyeo, respectively. Plant and root length of SIPAN-BNL treated with 300ppm in 10day-rice seedling were highly appeared, while dry weight of shoot was high at 300ppm SIPAN-BNL.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.97-112
• /
• 1995

The purpose of this study was to evaluate the effect of wetting condition made by drying time on bonding of resin cement to dentin. Freshly extracted bovine teeth were grinded to expose flat dentin surfaces. After the exposed dentin surfaces were treated with pretreatment agents and water rinse, each wetting condition of dentin surfaces was made according to drying times and methods including slight blow bry for I-second by air syringe, blow dry for 20-second by air syringe, and 12-hour dry in desiccator respectively. and then, previously made composite resin specimens were bonded onto each conditioned dentin surface of the specimen using Panavia-21(Kuraray Co.), Bistite(Tokuso Co.), and Choice(use with All bond-2, Bisco Inc.) resin cement according as manufacturer's instruction. Bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, cohesive failure rate was calculated, and fractured dentin surfaces and acrylic rod sides were examined under scanning electron microscope. The result were as follows ; In the group of bonding with Panavia-21 resin cement, higher tensile bond strength was seen in 12-hour dry group than in I-second and 20-second dry group(p<0.01). In the group of bonding with Bistite resin cement, higher tensile bond strength was seen in 1-second dry group than in 20-second and 12-hour dry group(p<0.01). In the group of bonding with Choice resin cement, no significant differences of bond strength under given drying time were seen. Cohesive failure rates derived from the groups of bonding with Panavia-21 and Choice resin cement were increased with the increase of tensile bond strength in each drying time. On SEM examination of fractured surface, adhesive failure mode with fractured resin tags was mostly seen in wet condition with I-second drying time in the group of bonding with Panavia-21 resin cement, mixed failure mode with shortened and fractured resin tag was seen in the group of bonding with Bistite resin cement, and regardless of drying time, and cohesive-adhesive mixed failure mode with fracture of 'Hollow' typed resin tags was mainly seen in the group of bonding with Choice resin cement.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.139-145
• /
• 2012

PURPOSE. To evaluate the shear bond strength of resin luting agent to dentin surfaces cleansed with different agents like pumice, ultrasonic scaler with chlorhexidine gluconate, EDTA and the influence of these cleansing methods on wetting properties of the dentin by Axisymmetric drop Shape Analysis - Contact Diameter technique (ADSA-CD). MATERIALS AND METHODS. Forty coronal portions of human third molar were prepared until dentin was exposed. Specimens were divided into two groups: Group A and Group B. Provisional restorations made with autopolymerizing resin were luted to dentin surface with zinc oxide eugenol in Group A and with freegenol cement in Group B. All specimens were stored in distilled water at room temperature for 24 hrs and provisional cements were mechanically removed with explorer and rinsed with water and cleansed using various methods (Control-air-water spray, Pumice prophylaxis, Ultrasonic scaler with 0.2% Chlorhexidine gluconate, 17% EDTA). Contact angle measurements were performed to assess wettability of various cleansing agents using the ADSA-CD technique. Bond strength of a resin luting agent bonded to the cleansed surface was assessed using Instron testing machine and the mode of failure noted. SEM was done to assess the surface cleanliness. Data were statistically analyzed by one-way analysis of variance with Tukey HSD tests (${\alpha}$=.05). RESULTS. Specimens treated with EDTA showed the highest shear bond strength and the lowest contact angle for both groups. SEM showed that EDTA was the most effective solution to remove the smear layer. Also, mode of failure seen was predominantly cohesive for both EDTA and pumice prophylaxis. CONCLUSION. EDTA was the most effective dentin cleansing agent among the compared groups.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.56-58
• /
• 1997

최근 polyolefin계열의 고분자 분리막이 많이 사용되고 있는데 특히 그 중 polypropylene막은 특성상 내약품성 및 내열성이 뛰어나 막 손상이나 성능 저하가 비교적 적은 고분자 막으로 평가되고 있다. 그러나 재질의 소수성 특성 때문에 심각한 fouling을 유발하게 되어 이를 방지하기 위해 막 표면을 hydrophilic agent로 개질 시켜 fouling을 제어하는 기술이 진행되고 있다. 일반적으로 막 재질을 개질 시키기 위하여 sulfonating agents, ozone, 그리고 hydrophilic monomer등을 grafting하는 방법들이 사용되고 있는데, 이는 공정상의 어려움이 있고 완벽한 친수성의 부여를 기대하기가 어렵다. 또한 막 기공 구조의 변화와 붕괴를 초래한다는 단점이 있다. 이밖에 hydrophilizing agent 등을 이용하여 wetting시킴으로써 일시적인 친수화 처리를 하는 방법이 있다. 그러나 이 방법은 membrane matrix로 부터 hydrophilizing agent가 새어 나가므로 영구적으로 사용할 수 없으며, 특히 의료용 분리막으로 이용될 경우 유출된 hydrophilizing agent가 cell membrane을 공격하여 cell 분해와 같은 인체에 해로운 결과를 초래하기 때문에 부적당하다. 최근 들어 저온 plasma를 이용한 표면 개질의 방법이 연구되고 있는데, 이는 plasma가 고분자 물질의 구조나 화학적 반응성과는 상관없이 모든 고분자 물질의 표면을 일정하게 개질 시킬 수 있으며 여타의 다른 방법들과는 달리 막 제조시 residual solvent의 문제점과 swelling의 문제점들이 발생하지 않는 장점 때문에 최근 각광받고 있는 기술 중의 하나이다. 또한 다른 방법에 비해 막과 plasma와의 강한 흡착력 때문에 영구적 친수성을 가지게 할 수 있다. 본 연구에서는 저온 plasma를 이용한 표면 개질이 막의 친수성 향상 및 fouling 방지에 미치는 영향에 대하여 조사하였다.