• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.576-584
• /
• 2019

This study was performed to evaluate the physicochemical properties of myofibrillar protein (MP) gels containing pork skin gelatin at different salt concentrations. MP gels were prepared to the different salt levels (0.15, 0.30, and 0.45 M) with or without 1.0% of pork skin gelatin. Cooking yield (CY), gel strength, shear stress were measured to determine the physical properties, and SDS-polyacrylamide gel electrophoresis, scanning electron microscopy, fourier transform infrared spectroscopy, sulfhydryl group and protein surface hydrophobicity was performed to figure out the structural changes among the proteins. The addition of gelatin into MP increased CYs and shear stress. MP at 0.45 M salt level had the highest CY and shear stress, as compared to MPs at lower salt concentrations. As the salt concentration of MP gels increased, the microstructure became the compact and wet structures, and decreased the amount of ${\alpha}-helix$/unordered structures and ${\beta}-sheet$. MP with gelatin showed a decreased amount of ${\alpha}-helix$/unordered structures and ${\beta}-sheet$ compared to MP without gelatin. The addition of gelatin to MP did not affect the sulfhydryl group, but the sulfhydryl group decreased as increased salt levels. MP mixtures containing gelatin showed a higher hydrophobicity value than those without gelatin, regardless of salt concentration. Based on these results, the addition of gelatin increased viscosity of raw meat batter and CY of MP gels for the application to low salt meat products.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.278-283
• /
• 1995

금속티타늄 분말과 $H_2O_2$와의 반응물에 KOH용액을 첨가하는 습식법에 의해 티탄산칼륨 섬유를 합성하고, 합성된 생성물을 XRD, SEM, FT-IR 등에 의해 검토하였다. 습식 합성법의 경우, $KOH/TiO_2$ 몰비, 합성시간, aging 시간등이 주로 최종 생성물에 영향을 주었다. $KOH/TiO_2 = 1/1$, 합성시간 24시간, aging 시간 24시간 및 하소 온도 $900^{\circ}C$에서의 생성물은 주로 potassium tetratitanate이었으며, 10 ~ 20mm의 가늘고 긴 장섬유이었다. 합성시간이 길어질수록, 그리고 KOH량이 적어질수록, potassium tetratitanate는 potassium hexatitanate로 바뀌면서 섬유의 길이는 짧아졌다.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.371-380
• /
• 1989

The purpose of this experiment is to elucidate the reaction mechanism concerning to the formation of crystalline BaTiO3 synthesized by adding the pH control agent(KOH soln) in TiCl4 and BaCl2 solution (Wet direct synthetic method). In this expeirment, it is identified that the amorphous barium-titanate having Ba-O-Ti bonding is formed above pH5 due to the -OH- ion and Ti-gel is formed below pH5 due to the polymerization of metatitanic acid. The bonding of the amorphous Ba-O-Ti is identified by FT-IR spectrum and crystallization temperature is about 82$0^{\circ}C$. If the pH of the above system according to the -OH- ion concentration is above 13.8, the polymerized metatitanic acid will be depolymerized and produce [TiO3]2+ion and crystalline BaTiO3 is formed by reacting the produced [TiO3]-- ion with the active Ba++ ion.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.747-754
• /
• 1990

Aluminum hydrate gels were prepared from the mixtures of bauxite and ammonium sulfate by wet acid process. Optimum conditions for obtaining the maximum yield( 99%) of aluminum hydrates from the same amount of bauxite were confirmed as follows ; 1. Mixing ratio ; addition of 25mole% of ammonium sulfate to 1mole of bauxite. 2. Calcination ; heated at 350℃ for 1hr. 3. Extraction ; leached at 95℃ in 1% H2SO4 for 90min. 4. pH of precipitating solution; slight below 7.0. Amorphous aluminum hydrates were precipitated at the pH lower than 8.5, but the precipitates crystallized to bayerite at the pH was 10. Mean diameter of α-Al2O3 powders which were obtained by calcining the aluminum hydrates was below 0.2㎛, and EDS analysis revealed than SiO2 was it's primary impurity.

• 전기화학회지
• /
• 제7권1호
• /
• pp.38-43
• /
• 2004

전기화학적으로 이온을 흡착시켜 제거시키는 capacitive deionization(CDI) 공정용 전극으로 탄소에어로젤에 실리카젤이 첨가된 다공성 탄소에어로젤 복합전극을 사유하여 1,000ppm NaCl수용액에서 10회와 100회 동안 싸이클을 변화시켜 탈염과 재생 특성에 대한 충전과 방전 시 시간에 따른 전류변화, 싸이클에 대한 전하량 변화, 그리고 CDI효율을 조사하였다. Paste rolling법으로 제조된 탄소에어로젤 복합전극은 CDI반응진행에 대한 전극 활물질의 탈락이 없이 전극의 성형성이 크게 향상되었고, 전극시트 제조시간을 $50\%$ 이상 단축시킬 수 있었다. 10분동안 충전과 방전으로 10회 싸이클까지의 전하량 결과를 살펴보면, $50wt.\%$의 실리카젤이 첨가된 C복합전극의 평균 충전 전하량이 실리카젤이 첨가되지 않은 A전극에 비해 $3\%$ 증가하였으며, 평균 방전 전하량은 $7\%$증가하였다. 5분동안 충전과 방전으로 100회 싸이클까지 평균 충전 전하량을 보면 $25w1.\%$와 $50wt.\%$의 실리카젤이 첨가된 B복합전극과 C복합전극은 A전극에 비해 각각 $6\%,\;14\%$증가하였으며, 또한 평균 방전 전하량도 각각 $9\%,\;21\%$증가하여 복합전극의 전하량 특성이 매우 우수하였다. 100회 싸이클까지의 CDI효율은 싸이클이 진행되면서 $70\%$ 이상으로 안정하게 유지하였고, 100회 싸이클에서는 B 복합전극이 $72.3\%$, C 복합전극이 $74.0\%$로 A 전극$(63.1\%)$보다 $10\%$이상 우수한 CDI 효율을 나타내었다.

• 분석과학
• /
• 제10권3호
• /
• pp.225-229
• /
• 1997

졸겔법에 의해 제조된 organically modified silicate(Ormosil)에 Rhodamine 6G perchlorate(Rh6GP)를 침투시켰으며, 이 유기염료가 무기/유기 복합 기저체(host)에 안정하게 침투되었는지를 확인하였다. 복합졸의 상태에서 측정된 유기염료의 흡수스펙트럼과 겔화된 후의 스펙트럼, 그리고 복합체가 완전히 건조된 상태에서의 스펙트럼을 비교하여 Rh6GP가 이합체화되지 않고 안정한 상태로 있을 수 있는 Ormosil의 조성을 확립하였다. 졸겔반응시의 촉매로 사용된 염산의 농도가 Tetraethyl orthosilicate(TEOS) 1몰을 기준으로 0.1몰 이내의 범위에서만 유기염료가 안정하고 이합체화되지 않은 상태가 유지되었다.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.333-337
• /
• 2005

In order to improve the performance of green emitting phosphors for plasma display panel, the $Zn_2SiO_4:Mn,Al$ phosphors were synthesized using sol-gel technique and studied using SEM and VUV photoluminescence spectrometer. pH values of the starting solutions (pH = 0.5$\~$2.34) were controled by HCl as the catalysis of hydrolysis and wet gels were dried at $80^{\circ}C$ and $120^{\circ}C$, respectively. We investigated the effects of pH and drying temperatures during sol-gel processes. The results indicated that the phosphor prepared at pH = 1 showed the maximum emission intensity in both drying conditions and the effect of pH of the starting solution on morphology were increased with particle size as HCl and phosphor dried at high temperature showed more spherical and smaller particles than at low.

• 센서학회지
• /
• 제16권6호
• /
• pp.395-400
• /
• 2007

Ambient drying sol-gel processing was used for monolithic silica ambigels in the temperature range of $130-250^{\circ}C$. A new method of mesopore ambigels, which mean the aerogels prepared by ambient pressure drying process synthesis, is suggested at first. This method includes two important approaches. The first point is that $SiO_{2}$ surface modification of wet gel was performed by trimethylchlorosilane in n-butanol solution. This procedure is provided the silica gel mesopore structure formation. The second point is a creation of the ternary azeotropic mixture water/n-butanol/octane as porous liquid, which is effectively provided removing of water such a low temperature by 2 step drying condition under ambient pressure. The silica aerogels, which were prepared by ambient pressure drying from azeotropic mixture of water/n-butanol/octane, are transparent, crack-free and mesoporous (pore size ${\sim}$ 5.6 nm) with surface area of ${\sim}$ $923{\;}m^2/g$, bulk density of $0.4{\;}g/cm^3$ and porosity of 85 %.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권2호
• /
• pp.87-96
• /
• 2020

This study examined the hygiene management of ultrasound probes by examining the cleaning tools for hygiene management of ultrasound probes, the presence or absence of wearing glove as a personal protective equipment, and the awareness of ultrasound probe hygiene. Parts 154 questionnaire about people working in the ultrasound room were surveyed and analyzed. The single gel removal tool of the ultrasound probe was most frequently used with a 48.7% cotton towel, and for double gel removal tools, the first gel removal tool was 42.4% cotton towel and the second gel removal tool was used with 57.6% wet tissue. Antimicrobial wipes were the most commonly used drug and instrument used in ultrasound hygiene management at 58.4%. According to the survey of the presence or absence of wearing glove during ultrasound examination, 46.8% were found to be unworn. When examining the intracavity ultrasound, 30.9% of those who do not wear glove and 61.0% of hygiene awareness of ultrasound probes are 'normal'. According to age, ultrasound probe gel removal tool was not significant difference(p>0.05). According to the working organization and the working department, it was significant difference to wearing gloves during ultrasound examination(p<0.05). Therefore, in order to properly sanitize the ultrasound probe, it is considered that a guideline for hygiene management of the ultrasound probe that fits the situation in Korea is necessary, and it is considered that thorough hygiene management training for inspector is necessary for efficient hygiene management of the ultrasound probe.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권3호
• /
• pp.501-505
• /
• 2020

Objective: The purpose of this study was to investigate the effects of aging methods (AM) i.e. dry-aging (DA) and wet-aging (WA) on the physicochemical properties and in vitro digestibility of proteins in beef short loin. Methods: Short loins (M. longissmus lumborum), were trimmed and boned-out on the fifth day postmortem, from a total of 18 Hanwoo, which were purchased from a commercial slaughterhouse. Short loins were separated randomly grouped into one of the three treatments: control, WA (1℃, 7 days), and DA (1℃, 0.5 m/s, 85% relative humidity [RH], 30 days). Results: Dry-aged beef (DAB) exhibited higher pH, water holding capacity (WHC), myofibrillar fragmentation index (MFI), and digestibility, however lower lightness, redness, and yellowness values, cooking loss, and shear force (SF), than those of wet-aged beef (WAB) (p<0.05). The myosin light chain band intensity of DAB was higher than that of control and WAB in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The in vitro digestibility of aged beef was highly (p<0.001) correlated to physicochemical properties except WHC. The correlation coefficient between AMs and WHC was higher than that between AM and SF (p<0.05) or MFI (p<0.001). A high correlation was observed between SF and MFI (p<0.001). Conclusion: Thus, we believe that DAB is more advantageous than WAB owing to its high digestibility and WHC and low SF.