• 펄프종이기술
• /
• 제42권1호
• /
• pp.41-47
• /
• 2010

Increasing ash content of the paper is one of the most effective methods for saving raw materials and steam consumption and improving optical properties and better print quality. However, the increase of filler loading or filler content using a conventional wet end system is limited due to severe loss in strength properties, affecting runnability and product quality. This is because the filler has no ability to make bonding with cellulosic fibers. Therefore, if the technology to give filler the bonding ability is developed, the ash content of the paper can be increased more than ever. This study was carried out to modify PCC by coating its surface with starch contributing to better bonding with fibers. To prepare the modified PCC, cationic starch was selected as a polymer and then pretreatment was done by mixing PCC and cationic starch. Consequently, the pretreated PCC contributed to higher tensile strength, stiffness and opacity than the conventional filler, such as GCC and untreated PCC. However, CIE whiteness and ISO brightness decreased slightly compared to conventional fillers.

• Carbon letters
• /
• 제11권3호
• /
• pp.176-183
• /
• 2010

PAN precursor fibers were produced via wet-spinning process, and effects of polymerization and spinning processes, especially the stretching process, were investigated on mechanical properties and micro-morphologies of precursor fibers. An increase in molecular weight, dope solid and densification and a decrease in surface defects were possible by controlling polymerization temperature, the number of heating rollers for densification and the jet stretch ratio, which improved the mechanical properties of precursor fibers. The curves for strength, modulus, tensile power and diameter as a function of stretch ratio can be divided into three stages: steady change area, little change area and sudden change area. With the increase of stretch ratio, the fiber diameter became smaller, the degree of crystallization increased and the structure of precursor fibers became compact and homogeneous, which resulted in the increase of strength, modulus and tensile power of precursor fibers. Empirical relationship between fiber strength and stretch ratio was studied by using the sub-cluster statistical theory. It was successfully predicted when the strengths were 0.8 GPa and 1.0 GPa under a certain technical condition, the corresponding stretch ratio of the fiber were 11.16 and 12.83 respectively.

• 기술사
• /
• 제17권4호
• /
• pp.28-39
• /
• 1984

Experiments were carried out for the development of a processing method of soybean into full-fat or defatted flour, using two varieties of soybean (kwangkyo produced in Korea and Bragg produced in India) Samples were subjected to dry dehulling, size reduction and wet heat treatment processes to make soybean flours. The quality of soybean flours were evaluated, and the results obtained were summarized as follows. 1. Crude fiber content of dehulled soybean was under 3.0% which indicated satisfactory dehulling, and there was no significant difference in crude fibre content between two varieties. 2. When dehulled soybean was cracked into soy grits by a hammer mill, 98.71∼98.86％ of the soy grit was in the range of 10∼18 mesh which was the optimum size of particle for quick and uniform penetration of heat into the intra-particle air spaces. 3. Moisture content of soy flour after steam treatment at 15 psig for 5 to 30 min was only 0.29∼1.68% which did not hinder the next milling operation. 4. From the color analysis of soy flours, it was observed that the dominant wavelength for all the samples are in a very narrow range from 575 to 581 nm and the color variation was from yellow to yellowish orange. Twenty to twenty five ％ higher reflectance was observed in the defatted flours than full fat flours. The ％ chroma of the defatted flour slightly increased as the duration of steaming of soy grits increased, whereas that of the full-fat flour did not. 5. The protein extractability in the defatted flour at pH 7.6 showed progressive decrease in solubility from 48.40％ (Bragg), 75.20％ (kwangkyo) for untreated flours to 9.75％ (Bragg), 26.27％ (kwangkyo) for 30 min steaming. But Kwangkyo variety showed twice higher protein extractability than Bragg variety.

• 유기물자원화
• /
• 제16권1호
• /
• pp.79-88
• /
• 2008

지구온난화에 따른 대체연료의 하나로 바이오에탄올의 생산이 증대되면서 곡물가격 상승과 같은 문제를 야기하고 있다. 차세대 바이오에탄올의 원료로서 목질계 바이오매스는 큰 잠재성에도 불구하고 높은 생산단가로 인하여 상업화 되지는 않고 있다. 생산단가의 절감을 위해 필요한 핵심기술은 가수분해율을 높이고 단당의 회수율을 높이는 것으로 전체 바이오에탄올 생산공정에서 열화학적 전처리이다. 본 연구에서는 목질계 바이오에탄올 제조공정에서의 열화학적 전처리에 대하여 소개하고 극복해야 할 문제들에 대하여 제시하고자 한다. 산, 알칼리, 열수, 용매, 암모니아, 산소 등을 첨가하는 전처리는 리그닌과 헤미셀룰로오스를 제거하고 셀룰로오스의 결정성을 감소시킨다. 이러한 전처리 방식들은 침엽수, 활엽수, 곡식의 줄기 등 목질계 원료에 따라 최적의 처리 조건들이 확립되어져야 한다.

• 보존과학연구
• /
• 통권34호
• /
• pp.110-122
• /
• 2013

정선 정암사 수마노탑의 부재는 탄산염암 중에서 돌로마이트이다. 이 탑은 전면에 걸쳐 백화에 의한 화학적 풍화가 진행되고 있고 기단부와 5층 이상의 옥개에서 부재간의 이격이 관찰되고 있다. 또한 부재 이격사이로 생물학적 풍화가 진행되고 있으며 3,5,6,7층 옥개에서 이탈부재가 관찰된다. 건 습식세척으로 생물과 백화일부를 제거하고, 스팀세척으로 잔여백화를 제거하였으며 기단부의 녹흔은 옥살산을 사용한 습포법으로 제거하였다. 이탈부재는 L-30과 Por-rok을 사용하여 고정시켰고, 기단부와 5층 이상의 옥개상부는 Por-rok을 사용하여 방수처리 하였다. 시공 후 방수처리한 구간에서는 백화현상이 나타나는 정도가 미약한것을 확인할 수 있었으므로 방수효과와 동시에 백화저감에도 효과가 있는 것으로 판단된다.

• 한국의류학회지
• /
• 제30권2호
• /
• pp.255-265
• /
• 2006

The purpose of this study was to examine the dyeing properties of four kinds of composite yams that were twisted in different processes. The composite yarns consist of acetate and functional polyester in ratio of 70 : 30. The composite yams were dyed at 100$^{circ}C$ and 125$^{circ}C$ using three types of dyes, disperse dyes for acetate fiber, PET fiber and PET-acetate blended fiber, in the three primary colors. The exhaustion($\%$) and K/S value were observed for each case. Also the effects of four different twisting processes to dyeing properties and physical properties were examined. Regardless of twisting methods, the composite yarns that were dyed at 125$^{circ}C$ had higher exhaustion($\%$) than those were dyed at 100$^{circ}C$ with all three types of dyes; However, tendency of the K/S value after reduction cleaning process was measured at 100$^{circ}C$ and the value measured 125$^{circ}C$ had a great difference with disperse dyes for acetate and dyes for PET. The difference of the K/S values of composite yarns, when dyed at 100$^{circ}C$ and 125$^{circ}C$ with disperse dyes for PET-acetate blended fiber, was almost negligible. According to twisting methods K/S values were in the following order: AP1 > AP3 > AP4> AP2. This means that AP1, treated at 220$^{circ}C$, had the highest K/S value and K/S value becomes higher as the yam is higher twisted and becomes lower as lower twisted. On the other hand, the dry shrinkage and wet shrinkage showed low shrinkage rate when the twist was high and steam setting temperature was high.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.281-291
• /
• 1995

이 연구의 목적은 수동형 격납용기 냉각계통의 용기 바깥표면이 건조 및 습한 조건일때 격납용기 내, 외벽에서 일어나는 열전달과정에 대한 실험적 자료를 얻는데 있다. 시험모델은 AP 600구조에 근거하여 격납용기의 둘레중 60$^{\circ}$부분만을 취하였다. 시험모델의 주요치수는 원형의 값을 대략 10분의 1로 축소한 것이다. 붕괴열을 모의하기 위하여 전기적으로 가열되는 증기발생기를 시험모델내에 설치하였다. 최대열유속은 8.91 kW/$m^2$ 이었다. 두 가지 형식의 시험이 수행되었다. 하나는 수막유동없이 공기만의 자연대류에 관한 시험이고 다른 하나는 수막유동과 공기의 자연대류가 동반된 증발열전달 시험이다. 시험결과 수막유동이 없는 경우 공기만의 자연대류 열전달 능력은 약 1.48 kW/$m^2$ 열유속에서 제한되고 있음을 알게 되었다 또한 수막유동과 공기의 자연대류가 동시에 일어나는 시험에서 열제거 능력은 현저히 향상됨을 알게 되었다 이들 열전달 측정치들을 기존 관계식들과 비교하였다.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.43-52
• /
• 2001

One of the major environmental issues Japanese cities is now facing with is the conservation of seminatural landscapes for the restoration of ecological integrity of urban areas. The satoyama landscape, which includes coppice woodlands, agricultural areas and rural settlements, is seen as an indispensable semi-natural landscape, formed as a result of man-nature interaction. However, because of the loss of the economic viability they are now abandoned and in the process of losing their ecological values. Today a number of local municipalities as well as NPO groups are involved in the conservation projects of these landscapes. Although satoyama landscapes are commonly believed to have maintained their character over the years, historical studies have revealed that these landscapes have experienced constant and dynamic changes due to a variation in human impacts. It is therefore understood that the conservation projects on satoyama landscapes should not intend to restore their past condition, but should wet the goal of maintaining their dynamic character by promoting ecological roles which the landscapes may play in the contemporary world. EXPO2005 project in Aichi Prefecture is a good example of a development project underway on satoyama landscapes which intend to conserve the landscapes by stimulating contemporary ecological for them. In EXPO2005 project the key issue was the conservation of semi-natural landscapes formed by constant and intensive human impacts over the centuries and thus allowing endemic and endangered species to be accommodated. The planning team proposed a scheme to restore economic viability of satoyama landscapes. The scheme involves re-introducing intensive human impacts through a new management system with an innovative technology. This may restore the economic viability of lumbers provided form satoyama woodlands. EXPO2005 is understood as a model case which stimulates contemporary ecological functions of satoyama landscapes by applying innovative planning concepts.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.24-29
• /
• 2009

나노크기의 산화세륨 분말을 제조하기 위해서는 출발물질로 탄산세륨[$Ce_2(CO_3)3{\cdot}XH_2O$]이 널리 사용되고 있는데, 탄산세륨은 소성을 통하여 탄산기체와 수증기를 방출하면서 더욱 작은 입자들로 쪼개진 다공성 구조의 산화세륨이 형성되며 이러한 다공성의 산화세륨을 분쇄함으로서 나노크기의 산화세륨을 얻을 수 있다. 본 연구에서는 염화세륨용액으로부터 중탄산암모늄을 첨가하여 제조된 탄산세륨의 소성온도, 분쇄시간, 유성밀의 회전속도, 분산제 첨가량 및 장입된 분쇄 볼 크기 등의 변화에 따라 얻어지는 산화세륨의 평균 입자크기 분석을 통하여 탄산세륨으로부터 나노크기의 산화세륨 제조공정 특성에 대하여 알아보았으며, 소성온도 $700^{\circ}C$, 분쇄시간 5시간 조건에서 평균 입자크기 160 nm의 산화세륨 분말을 제조할 수 있었다.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.793-801
• /
• 2005

본 연구는 100%의 순환굵은골재의 사용과 순환잔골재의 혼입률에 따른 콘크리트의 기본적인 물성 변화를 고찰하였으며 장기강도 증가 및 내구성 향상을 위한 방안으로 플라이애쉬를 시멘트 대체재로 사용한 순환골재 콘크리트의 강도 및 염소이온 침투 저항성과 중성화 저항성의 내구성에 대한 연구를 수행하였다. 또한 순환골재의 고부가가치 자원화로서의 활용도를 극대화시킬 수 있는 방안의 일환으로 프리캐스트 구조체로의 적용을 증기양생을 통하여 검증하였다. 순환굵은골재를 100%사용할 경우, 순환잔골재의 혼입률은 60%이하로 사용하는 것이 강도의 측면에서 유리한 것으로 판단된다. 또한 뽀일 강도를 비교한 결과 증기양생이 순환골재 콘크리트에도 무리 없이 적용될 수 있을 것으로 사료된다. 염소이온 투과 저항성은 플라이애쉬의 양에 따라 증가하였으며, 재령 21일에서는 낮음 그리고 56일에서는 매우 낮음으로 판명되었다. 촉진중성화에 따른 후 중성화 깊이 및 중성화 속도계수는 플라이애쉬의 양에 따라 증가하는 경향을 보였지만, 측정된 깊이는 약 10mm 이하로서 우려할 만한 정도는 아닌 것으로 판단된다.