• 제목/요약/키워드: Wet Fractionation

검색결과 19건 처리시간 0.029초

셀룰로오스 나노섬유의 중력침강법에 의한 치수분획 및 형태학적 성질 (Size Fractionation of Cellulose Nanofibers by Settling Method and Their Morphology)

  • 박찬우;한송이;이승환
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권3호
    • /
    • pp.398-405
    • /
    • 2016
  • 본 연구에서는 셀룰로오스 CNF의 치수별 분획 가능성 및 그 효율성을 평가하기 위하여, 기계적 해섬처리로 얻어진 CNF 수현탁액을 중력침강시켜 치수별 CNF를 분획하고 형태학적 성질 및 치수분포를 조사하였다. 침강속도는 해섬처리 횟수가 증가할수록 늦었으며, 침강 높이 또한 작았다. 침전층의 분획수율은 해섬처리 횟수가 증가하면서 감소하였으며, 중간층 및 상등액층은 증가하였다. 상등액 CNF의 직경 분포폭이 가장 좁았으며, 중간층 및 침전층으로 분포폭이 넓어졌다. 또한, 해섬처리 횟수가 증가할수록 직경 및 분포폭이 감소하였다. 여수시간은 상등액층, 중간층, 침전층 순서로 길게 나타났다.

피조개 지질 및 지방산 조성에 관한 연구 (Studies on the Lipid and Fatty Acid Compositions of Ark-Shell, Anadara broughtonii)

  • 문숙임
    • 한국식품영양과학회지
    • /
    • 제21권4호
    • /
    • pp.436-442
    • /
    • 1992
  • 피조개 월별 생산량이 8~9월에 가장 많고, 피조개 소비는 여름철에 집중되고 있어, 여름산 피조개의 식품학적 특성을 구명하기위하여 불검화물함량, 요오드가, 지질조성 및 지방산조성을 분석하였다. 조지질함량은 0.83%, 불검화물함량은 20.19%였으며, 요오드가는 156.13이었다. 지질조성은 triglyceride가 59.46% 로 가장 높았고, 그 다음으로 diglyceride, hydrocarbon, sterol ester, free fatty acid, phospholipids, free sterol, monoglyceride의 순이었다. 총지질의 지방산조성의 경우, 함량이 특히 많은 것은 $C_{17 : 0}$, $C_{16 : 0}$, $C_{18 : 1}$ and $CT_{16 : 2}$, $C_{16:1}$로 이들 5종의 지방산이 전지방산의 66.55%를 차지하였다. 중성지질의 지방산조성의 경우, 함량이 특히 많은 것은 $C_{16 : 0}$, $C_{18 : 1}$, $C_{22 : 1}$로 이들 3종의 지방산이 전지방산의 52.93%를 차지하였으며, 극성지질의 경우는 $C_{16 : 0}$, $C_{18 : 2}$, $C_{20 : 5}$, $C_{22 : 6}$ 등의 4종의 지방산이 전지방산의 58.16%를 차지하였다. 구성지방산의 조성비를 비교하면, 총지질은 포화지방산> rnonoene 산>polyene산의 순으로 포화지방산이 가장 높았고, 중성지질은 monoene산>포화지방산> polyene산의 순으로 monoene산이 가장 높았고, 극성지질은 포화지방산>polyene산>monoene산의 순으로 포화지방산이 가장 높았다.e산의 순으로 포화지방산이 가장 높았다.

  • PDF

Hpa I endonuclease의 정제와 특성 (Purification and Characterization of Hpa I endonuclease)

  • 윤호섭;강선철;유욱준
    • 한국미생물·생명공학회지
    • /
    • 제13권1호
    • /
    • pp.87-91
    • /
    • 1985
  • Hpa I endonuclease를 순수 정제하였다. 150g (wet weight)의 Haemophilus parainfluenzae로 부터 얻은 crude extract를 ammonium sulfate fractionation을 거친후 Heparin agarose, SP-sephadex, DEAE-sephadex, phosphocellulose 등 chromatography를 거쳐 최종적으로 0.2mg의 효소를 얻었다. Specific activity는 $2.2{\times}10^6units/mg$이었다. 얻어진 Hpa I endonuclease는 SDS-polyacrylamide gel에서 한개의 band를 보였고, 그 효소활성은 50mM NaCl과 pH 7.0과 7.5사이에서 가장 높았다.

  • PDF

고지재상연구 (제5보) -공정수 폐쇄화를 위한 칼슘경도 조절- (Recycling of Wastepaper(V): -Calcium Hardness Control of Process Water for Zero-Discharge System-)

  • 지경락;류정용;신종호;송봉근;오세균
    • 펄프종이기술
    • /
    • 제31권2호
    • /
    • pp.15-24
    • /
    • 1999
  • A new technique for recycling of white water was developed in order to reduce the calcium hardness in a closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by reacting with sodium carbonate, and the precipitated $CaCO_3$ was removed from the system using a flotation fractionation method, which has been commonly used in deinking process. In the flotation stage, a mixed gas of $CO_2$-air was purged into the flotation cell because the pH of $Na_2CO_3$-treated white water was reduced to neutral by $CO_2$ gas. Since $CaCO_3$ precipitate tends to stick onto fine fiber surface and then selectively removed from the white water, a proper amount of suspended solid in white water acts as an important factor for deciding the removal efficiency. By the application of $Na_2CO_3$ addition-$CO_2$ flotation to the short circulated white water, the calcium hardness was significantly reduced by 87% and more. Removal of calcium ions with fine fibers led to a drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

  • PDF

Fluid Energy Mill에 의한 점토성 무기소재 미립화 분급기술 소고 (Comminution-Classification of Clay-type Minerals by Fluid Energy Mill)

  • 김태욱;김만영;정필조;이주완
    • 한국세라믹학회지
    • /
    • 제22권5호
    • /
    • pp.47-53
    • /
    • 1985
  • In view of innovated utilization of Korean clay resources conventional techniques for pulverization are reviewed in comparison with fluid energy milling processes of fluidized-bed type. Throughout experiment indigenous halloysite ores (white grade) after usual pretreatment are employed as typical sample. It is evidenced that grinding by means of porcelain ball mills has limitation in reducing clay particles to less than 10${\mu}{\textrm}{m}$ in diameter regardless of whether it is processed in dry or wet. Upon use of tungsten carbide bull mill particulation to submicron sizes could be effected with relative ease but severe coloration in grey is attended indicating metallic contamination possibly from friction of the grinding apparatus itself. In contrast the modified fluid en ergy milling enables particulation to $\leq$10${\mu}{\textrm}{m}$ in diameter with simultaneous classification int olimited ranges of particle size distributions. Since this technique is in principle based on the interparticle collisions rather than on the frictions between particles and mill surfaces minimum impurity attendance would be an additional advantage. Evidence leads to the conclusion that the fluidized-bed type milling is regarded as highly effective in puverization as well as fractionation of the clay minerals under examination. This is especially so in contemplating high-value and/or high-purity clay products.

  • PDF

목질 벌크향상제 분획별 적용에 따른 라이너지의 건조효율 및 물성변화 (The Changes in Drying Efficiency and Paper Properties of Linerboard by the Application of the Fractions of Wood Powder as a Bulking Agent)

  • 김동섭;윤도현;성용주
    • 펄프종이기술
    • /
    • 제46권5호
    • /
    • pp.61-68
    • /
    • 2014
  • The energy efficiency of papermaking process becomes more significant because of various new regulation of the energy consumption and the green house gas emission. In this study, the effects of wood powder addition on the drainage and the drying efficiency of the OCC based paper products, linerboard, were deeply investigated for improving energy efficiency. The fractionation of wood powder depending on the size were conducted. The bigger size of wood powder resulted in the higher bulk and the higher drainage efficiency, but the lower paper strength. The drying efficiency were in detail evaluated depending on the drying process level. In the first section of drying process until the 80% solid level, there were no significant changes in the drying efficiency by the addition of wood powder. However, after the 80 % solid level, the drying efficiency was greatly improved by the addition of wood powder. Those results showed the addition of wood powder could greatly affect not only the drainage in forming and wet pressing but also the drying process.

Aspergillus awamori 가 생산하는 konjak mannan 분해효소에 관한 연구 (A Study on the Konjak Mannan-hydrolyzing Enzymes from Aspergillus awamori)

  • 장경정;이서래
    • Applied Biological Chemistry
    • /
    • 제15권3호
    • /
    • pp.199-206
    • /
    • 1972
  • Aspergillus awamori가 생산하는 konjak mannan 분해 효소군(酵素郡)에 관한 연구로서 효소생산조건, 효소의 정제 및 성질, 효소분해에 미치는 감마선 조사(照射)의 영향을 조사하여 다음과 같은 결과를 얻었다. 1) 보존균주(保存菌株) 80여개중 konjak mannan 분해효소를 다량 생산하는 것으로 A. awamori를 선정하였다. 2) A. awamori를 밀기울 고체배양하는 경우 최적 배양일수는 3일, 살수(撒水)의 pH는 4, 살수량(撒水量)은 100%가 가장 좋았다. 3) A. awamori를 액체 진탕 배양하는 경우 최적 배양일수는 6일, 기본배지(基本培地)에 대한 추가탄소원(追加炭素源)으로는 xylose 0.1%, 질소원(窒素源)으로는 peptone 0.04%가 가장 좋았다. 4) A. awamori의 고체배양물에서 konjak mannan분해효소를 유안염석(硫安鹽析) 및 DEAE-Sephadex column chromatography에 의하여 정제(精製)하고 fraction I과 fraction II를 분리하였다. 5) fraction I과 fraction II의 작용최적 pH는 모두 4이었고 pH 안정(安定)범위는 각각 $3.5{\sim}5$$3{\sim}6$이었으며 konjak mannan에 대한 가수분해도는 각각 9%, 50%, guar gum에 대한 것은 각각 14%, 11%이 었 다. 6) 조효소액(粗酵素液)에 의한 konjak mannan의 가수분해도는 0.5 Mrad이상의 감마선 조사(照射)에 의하여 약간 촉진되었으며 특히 수화(水和)상태에서의 조사(照射)에 의하여 그 효과가 현저하였다. 7) konfak mannan의 감마선 조사(照射)는 점도(粘度)강하와 환원력(還元力)증가를 초래하였으며 건조상태보다는 수화(水和) 상태에서 그 효과가 현저하였다.

  • PDF

Influence of Drying Temperature and Duration on the Quantification of Particulate Organic Matter

  • Lee, Jin-Ho;Doolittle, James J.;Lee, Do-Kyoung;Malo, Douglas D.
    • 한국환경농학회지
    • /
    • 제25권4호
    • /
    • pp.289-296
    • /
    • 2006
  • Various drying conditions, temperatures (40 to $80^{\circ}C$) and durations (overnight to 72 hrs), for the particulate organic matter (POM) fraction after wet-sieving size fractionation have been applied for determination of POM contents in the weight loss-on-ignition method. In this study, we investigated the optimum drying condition for POM fraction in quantification of POM and/or mineral-associated organic matter (MOM; usually indirectly estimated). The influence of the drying conditions on quantifying POM was dependent upon soil properties, especially the amount of soil organic components. In relatively high organic soils (total carbon > 40 g/kg in this study), the POM values were significantly higher (overestimated) with drying at $55^{\circ}C$ than those values at $105^{\circ}C$, which were, for example, 173.2 and 137.3 mg/kg, respectively, in a soil studied. However, drying at $55^{\circ}C$ for longer than 48 hrs of periods produced consistent POM values even though the values were much higher than those at $105^{\circ}C$. Thus, indirect estimates of MOM (MOM = SOM-POM) also tended to be significantly impacted by the dry conditions. Therefore, we suggest POM fractions should be dried at $105^{\circ}C$ for 24 hrs as determining POM and MOM contents. If the POM traction is needed to be dried at a lower temperature (e.g. $55^{\circ}C$) with a specific reason, at least 48 hrs of drying period is necessary to obtain consistent POM values, and a moisture correction factor should be determined to adjust the values back to a $105^{\circ}C$ weight basis.

Carbohydrate and lipid spectroscopic molecular structures of different alfalfa hay and their relationship with nutrient availability in ruminants

  • Yari, Mojtaba;Valizadeh, Reza;Nnaserian, Abbas Ali;Jonker, Arjan;Yu, Peiqiang
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권11호
    • /
    • pp.1575-1589
    • /
    • 2017
  • Objective: This study was conducted to determine molecular structures related to carbohydrates and lipid in alfalfa hay cut at early bud, late bud and early flower and in the afternoon and next morning using Fourier transform infrared spectroscopy (FT/IR) and to determine their relationship with alfalfa hay nutrient profile and availability in ruminants. Methods: Chemical composition analysis, carbohydrate fractionation, in situ ruminal degradability, and DVE/OEB model were used to measure nutrient profile and availability of alfalfa hay. Univariate analysis, hierarchical cluster analysis (CLA) and principal components analysis (PCA) were conducted to identify FT/IR spectra differences. Results: The FT/IR non-structural carbohydrate (NSCHO) to total carbohydrates and NSCHO to structural carbohydrate ratios decreased (p<0.05), while lignin to NSCHO and lipid CH3 symmetric to CH2 symmetric ratios increased with advancing maturity (p<0.05). The FT/IR spectra related to structural carbohydrates, lignin and lipids were distinguished for alfalfa hay at three maturities by PCA and CLA, while FT/IR molecular structures related to carbohydrates and lipids were similar between alfalfa hay cut in the morning and afternoon when analyzed by PCA and CLA analysis. Positive correlations were found for FT/IR NSCHO to total carbohydrate and NSCHO to structural carbohydrate ratios with non-fiber carbohydrate (by wet chemistry), ruminal fast and intermediately degradable carbohydrate fractions and total ruminal degradability of carbohydrates and predicted intestinal nutrient availability in dairy cows ($r{\geq}0.60$; p<0.05) whereas FT/IR lignin to NSCHO and CH3 to CH2 symmetric stretching ratio had negative correlation with predicted ruminal and intestinal nutrient availability of alfalfa hay in dairy cows ($r{\geq}-0.60$; p<0.05). Conclusion: FT/IR carbohydrate and lipid molecular structures in alfalfa hay changed with advancing maturity from early bud to early flower, but not during the day, and these molecular structures correlated with predicted nutrient supply of alfalfa hay in ruminants.